Excavators

HPI Flow Divider D3 000 2030 HA2008HL00. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “jcbpumps” and is located in this country: GB. This item can be shipped worldwide.

2013 CAT 301.4C OROPS MINI TRACK EXCAVATOR, STRAIGHT BLADE. Machine Highlights Year: 2013 Make: CAT Model: 301.4C Front Aux Hyd Variable Width Tracks Straight Blade 17HP Max Dig Depth: 7′8″ Operating Weight: 3,236LBS Hours: 185 Serial Number: CAT3014CPLJK01045 Engine Make: Yanmar Model: 3TNV76 Gross Power: 24.3hp Net Power: 17.7hp Displacement: 68.1cu in Rated Net Power – ISO 9249: 17.7hp Operating Specifications Machine Overhang: 16.7in Stick Length – Standard: 37.1″ Operating Weight: 3,236LBS Hydraulic System Operating Pressure – Swing: 2176 psi Operating Pressure – Equipment: 2901 psi Operating Pressure – Travel: 2901 psi Pump Flow at 2,200 rpm: 9.2 gal/min Maximum Bucket Force: 3,597LBS Maximum Stick Force: 1,596LBS Blade Height: 9.1in Width: 3.3ft in Lift Height: 8.3in Dig Depth: 10.4in Service Refill Capacities Fuel Tank Capacity: 6.3gal Hydraulic Tank Capacity: 5.3gal Travel System Gradeability: 30 degrees/58% Travel Speed – 1st Gear: 1.5mph Track Width: 9.1in Travel Speed – 2nd Gear: 2.5mph Dimensions Height: 7.5ft in Width: 2.4ft in Undercarriage Width – Retracted: 3.3ft in Undercarriage Width – Extended: 4.3ft in Maximum Digging Depth: 7.8ft in Tail Swing Radius: 3.6ft in Maximum Vertical Digging Depth: 5.4ft in Maximum Digging Height: 11.6ft in Maximum Dumping Height: 8.3ft in Maximum Digging Radius: 12.7ft in Maximum Reach – On the Ground: 12.5ft in Maximum Lift of Dozer Blade Above Ground: 8.3in Maximum Digging Depth – Dozer Blade Below Ground: 10.4in Track Length: 4.8ft in Maximum Swing Angle of Boom System to the Right: 49 degrees Maximum Swing Angle of Boom System to the Left: 73 degrees Minimum Boom Swing Radius: 4.9ft in 2013 CAT 301.4C OROPS MINI TRACK EXCAVATOR, VARIABLE WIDTH TRACKS, FRONT AUX, STRAIGHT BLADE, 17HP, MAX DIG DEPTH OF 7′8, AND AN OPERATING WEIGHT OF 3,042LBS! BANK FINANCING IS AVAILABLE! Providence equipment offers a variety of financing options to meet your expectation equipment purchasing needs. Our financing process is quick and can be customized to fit your financial situation. Providence Equipment, LLC assumes no liability for errors or omissions in this listing. Expressly excluded are warranties of merchantability, fitness for use and purpose and description. (Hour meter readings or mileages represented) are unverified information and accuracy is expressly not guaranteed in any way by Providence. All sales are final. Any information is gathered from sources believed to be reliable but is not guaranteed to be accurate. Item descriptions and listings are subject to change, correction, update or cancellation at any time, without notice. Terms of Sale Overview. We only accept wires and certified funds. ALL FUNDS MUST CLEAR THE BANK BEFORE THE ITEM MAY BE PICKED UP. Providence Equipment, LLC reserves the right to. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in this country: US. This item can be shipped to United States.

• Make: CATERPILLAR
• Model: 301.4C
• Options: ,
• Vehicle Title: Clear

JCB TWIN HYDRAULIC GEAR PUMP. Genuine Parker Made in EU. Not manufactured in India so will last more than 5 minutes!!! Replaces the following JCB part numbers. Please note these are genuine Parker/Ultra pumps for JCB machines. Manufactured and tested in the same factory as JCB units. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “jcbpumps” and is located in this country: GB. This item can be shipped worldwide.

• Item: Parts & Accessories
• Unit Quantity: 1
• Power Source: Hydraulic
• Excavator Type: JCB
• Year Manufactured: 2019

LOW HOUR 2019 22000 LB MINING SERIES LITTLE USED RIPPER FOR ROCK – SHALE – SANDSTONE WAS ON PC650 KOMATSU. PERFECT FOR GOLD MINERS FOR THE TOUGHEST PERMAFROST ON SLOPES AND HILLS WHERE YOU CRAWLERS WITH RIPPERS CANNOT ACCESS. Minimum noise levels. Minimum maintenance. No daily lubrication required. Minimum wear parts consumption. Long life components and materials. Less fuel consumption per produced m3/ton. Less emission per produced m3/ton. Environmental protection (Bio Lubricants). Marine/underwater operation. Can be used on standard excavators. Increase operator comfort. HARDOX® & Strenx construction ensures long-lasting durability in extreme conditions. Designed and manufactured in Spain by Xcentric International, only the best materials are used for excellent quality. Solid, durable and characterized by the now recognizable clean lines designed to resist wear and high stresses in the toughest working conditions. Extreme compactness and low center of gravity improves balance and drastically reduces the strain on the excavator arm, eliminating impact vibrations. Introducing the Xcentric Ripper® hydraulic ripper. A revolution in high volume excavation and demolition. After more than 10 years development in the design and manufacture of the worlds most productive, reliable, and technologically advanced hydraulic ripper, Xcentric International has taken the Xcentric Ripper range to a whole new level with the release of the all new Xcentric Ripper Mining Series. The Xcentric Ripper® outperforms traditional hydraulic hammers in nearly every type of material, particularly in medium hardness rock with natural fracturing and layers. Using patented Impact Vibration Accumulation Technology, the attachment works with the natural rigidity of the rock, and the vibrations that are produced shake the material to deepen cracks for easier breakup. It is an exceptional tool for frozen ground excavation, demolition, rock excavation, slag recycling, dredging, trenching, underground mining, and even underwater applications. XR mining series range. Easy operation with low noise. Unbelievable power and versatility. Easy on your machine’s pins and bushings. Field replaceable ripper teeth. Patented impact vibration accumulation technology. A safe, easy, and environmentally friendly alternative to drilling and blasting options. One of our customers in the pile and dredging industry was searching for an excavation tool that could be deployed for a three-month project which included the removal of more than 40,000 yards of basalt from a shoreline to make way for a new harbor and breakwater for incoming marine traffic. The superintendent saw video of the new Xcentric Ripper Mining Series working online and decided to give the new more powerful version of the hydraulic ripper a chance to prove it belonged in their arsenal of excavation tools. “We have the XR82 model working on one machine and a clam shell bucket for dredging on the other, ” he said. We needed a tool that would work well under water and the XR82 has performed to our expectations so far. I see it proving valuable as an asset in our equipment fleet and working really well on some of our more specialty projects. Mining Series Design Improvements While the working technology is based on the standard series, the new Mining Series has been reinforced with a remodeled working platform, which delivers a much higher energy impact force to the work tool with a lower frequency. Larger and heavier eccentric gears are now machined from a single billet of steel and precisely designed to allow for equal weight distribution side-to-side and direct impact energy vertically. The lower pivot arm and housing is reinforced to limit wear where the ripper typically encounters material, and the ripper arm or beak has been remodeled and reinforced with Hardox® steel. The XR Mining Series also has a narrower body profile, making it ideal for tunneling or operating in confined areas. Designed to increase production, at lower operating costs and reduced noise levels, the all new XR Mining Series is a revolution for high volume rock excavation. Like the regular series that came before it, the Mining Series will be an invaluable tool for frozen ground excavation, rock excavation, quarrying, surface and underground mining, oil sands excavation, utility project installations, pipeline trenching, demolition, slag recycling, dredging, and even underwater applications. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “easyadfrank” and is located in this country: US. This item can be shipped to United States.

• Modification Description: CUSTOM PIN GRABBER TOP PLATE FOR 600-750 CLASS PIN GRABBER COUPLER
• Hours: 200
• Bundle Description: XCENTRCI 600-1200 CLASS EXCAVATOR RIPPEWR C/W 600-750 CLASS PINGRABBER TOP PLATE
• Max Dig Depth: Over 26′
• Custom Bundle: Yes
• MPN: HR82
• Equipment Type: Hydraulic Excavator
• Modified Item: Yes
• Serial Number: 18062501
• Model Year: 2019
• Net Horsepower (HP): 191 – 200
• Model: EXCENTRIC HR82 RIPPER
• Country/Region of Manufacture: Italy
• Operating Weight: 22,001 – 23,000 lbs

Brand new Twin Hydraulic Pump. Genuine Parker Made in EU. Not manufactured in India so will last more than 5 minutes!!! GENUINE PARKER JCB UNIT 20/903300. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “jcbpumps” and is located in this country: GB. This item can be shipped worldwide.

• Item: Parts & Accessories
• Unit Quantity: 1
• Power Source: Hydraulic
• Excavator Type: JCB
• Year Manufactured: 2020

BUCKET LINK C/W BUSHES TO SUIT KUBOTA. WE CAN OFFER UNDERCARRIAGE COMPONENTS FOR MOST MINI EXCAVATORS, TRACKED DUMPERS AND CHIPPERS OFF THE SHELF, AND ARE. EUROPE’S LARGEST AFTERMARKET STOCKIST OF TOP ROLLERS, BOTTOM ROLLERS, SPROCKETS, IDLERS, RUBBER TRACKS, STEEL TRACKS, BOOM PINS & BUSHES, BUCKETS AND ATTACHMENTS. WE ALSO SPECIALISE IN THE MANUFACTURE AND SUPPLY OF BUCKETS AND ATTACHMENTS WHICH ARE PRODUCED AT OUR NEATH FACTORY – WE OFFER A FULL BESPOKE SERVICE FOR SPECIAL PROJECTS. OUR TECHNICAL KNOWLEDGE IS UNRIVALLED IN THE INDUSTRY. IF YOU WISH TO. PAY BY CARD OR BANK TRANSFER. BANK AND TELEPHONE INFORMATION. ORDERING INFORMATION – PLEASE READ BEFORE PURCHASING. FOR THE COURIER FIRM – WE WILL. DISPATCH THE ITEM UNTIL WE HAVE A. IF YOU ARE OUTSIDE THIS AREA WE CAN DELIVER BUT THE COST VARIES DEPENDING ON YOUR POST CODE. OUTSIDE OF THE UK. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “mcplantspares” and is located in this country: GB. This item can be shipped to United Kingdom, Antigua and Barbuda, Austria, Belgium, Bulgaria, Republic of Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French Guiana, Iceland, Jersey, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and Caicos Islands, Aruba, Saudi Arabia, South Africa, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and Tobago, Vietnam.

• Item: Parts & Accessories
• Type: Diggers

Poclain ref PM45-52 Hydraulic pump. 700 – 3400RPM OPERATING RANGE. COULD BE USED FOR MANY CLOSED LOOP HYDRAULIC APPLICATIONS THAT REQUIRE 20-60HP SUCH AS CONVEYOR DRIVES, MARINE PROPELLOR DRIVES. 50cc/rev VARIABLE FLOW IN BOTH DIRECTIONS (A-B OR B-A). CONTROL 12V PROPORTIONAL SOLENOID 0-50cc/rev. MOUNTING FLANGE SAE B 2 HOLE. SHAFT 7/8 13T SAE B. REAR THRU DRIVE SAE A. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “jcbpumps” and is located in this country: GB.

• Item: Parts & Accessories
• Unit Quantity: 1

JCB HYDRAULIC GEAR MOTOR 20/925660. BRAND NEW ORIGINAL UNIT. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “jcbpumps” and is located in this country: GB. This item can be shipped worldwide.

• Unit Quantity: 1
• Brand: JCB
• Year Manufactured: 2018

Please don’t ask me if it will fit your machine. If you have a quick attach it probably wont unless you remove it. The measurements are in pics. 60mm pins with widest of all between ears for all makes with 60mm so if you have 60mm pins yes it will fit your machine. Really nice bucket for the price. Here are some machines this bucket will fit by pin on. Komatsu pc 120 100 120 128 138 158. Cat 205 206 211 212. Wacker Neuson Mustang ME12002. New Holland EC130 160 140 200. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “lbfarm01″ and is located in this country: US. This item can be shipped to United States.

• Model: Excavator bucket
• Make: Komatsu
• Equipment Type: Hydraulic Excavator