Disclaimer
The opinions expressed herein are my own personal opinions and do not represent anyone else's view in any way, including those of my employer.
© Copyright 2024
The opinions expressed herein are my own personal opinions and do not represent anyone else's view in any way, including those of my employer.
© Copyright 2024
It’s heavy and will require to be freighted.
Brand new JCB hydraulic pump 20/902700 & 20/917400. Please note these are genuine Parker hydraulic pumps for JCB machines. They are manufactured and tested in the same factory as JCB units. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “jcbpumps” and is located in this country: GB. This item can be shipped worldwide.
Brand New JCB pump – Made in same factory as JCB units. Supplied with 41T PTO gear as shown. 100% assured quality – Made by Parker Hydraulics. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “jcbpumps” and is located in this country: GB. This item can be shipped worldwide.
JCB HYDRAULIC GEAR MOTOR 20/925678. BRAND NEW ORIGINAL UNIT. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “jcbpumps” and is located in this country: GB. This item can be shipped worldwide.
JCB HYDRAULIC GEAR MOTOR 20/925660. BRAND NEW ORIGINAL UNIT. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “jcbpumps” and is located in this country: GB. This item can be shipped worldwide.
Pre-owned, genuine OEM Cummins 3202158. Fits Cummins KT, KTA19, KTA 19. Salvaged from a previously working engine. And repainted with red oxide primer. All threaded holes have been chased with a range of tap sizes, cleaned, inspected and all are good there are no broken out threaded holes. There are two bushings still in location in this casting and the external manual cranking pin and worm gear have also not been removed. And may be ok to use. All other seal and bushing fits are tight and clean. Please look carefully at the photos and part numbers to make sure this part will fit your engine. Responsibility for this not fitting your engine. The two castings have identical bore, thread hole locations and dimension sizes. The tan coloured casting part actual number is 3202158. They have both been made in the USA. As far as I can tell the red casting has an old part number other than that they are identical. 3202158 is the part number on the tan coloured part. It may have superseded the actual number on the red coloured part. The red casting has more reinforcing points on the inside. It may be a very first OEM Cummins casting pattern. You will be purchasing a perfectly good pre-owned Cummins part that is in excellent condition. If you have any concerns please send me a message and I will reply with what ever I can to help you. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “metalmogul46″ and is located in this country: CA. This item can be shipped to Canada, United States.
Alternative, OEM & Genuine Parts For JCB Machinery. Than 175000 quality parts available. ? Suitable for JCB excavator JS180, JS200, JS210, JS220 and more. Net Weight: 20 KG. Here are some answers. Please inquire with your machine serial number. (VIN = Vehicle Identification Number). If you need to check suitability for your machine before purchasing. Is not enough quantity? Please let us know and we will increase the quantity for you. Can’t find what you’re looking for? Leave us your request and we’ll be in touch. 99% of our pictures are made by us in our photo studio over the years. Trademarks JCB, PERKINS, etc. Used in our listings are the property of their respective owners and are used only for informational purposes. Green Plant Machinery LTD does not submit any rights to trademarks, company names, and products used in the content, in addition to its own. For Mainland UK only. Non-mainland UK addresses include the following. HIGHLANDS, IRELAND, CHANNEL ISLANDS, JERSEY, ISLE OF WIGHT and the following postcode areas. AB31to>38, AB42to>56, BT>ALL, FK17to>22, G83, GY>ALL, HS1>9, IM>ALL, IV>ALL, JE>ALL, KA27to>28, KW>ALL, PA>ALL, PH5to>50, TR21to>25, ZE>ALL. Packages may need to be signed for, or if the courier decides, left in a secure location. Please note that we do not deliver outside working hours, at weekends or Bank Holidays. Deliveries are Monday to Friday. Upon receipt, all products will be inspected and at our discretion, credit may be refused. All deliveries should be checked before signing the Driver’s sheet to avoid any’damage’ claims being rejected. In any case, all damages must be reported to us within 24 hours for us to raise any claims with our couriers. Any claims after 24 hours cannot be accepted. See our other items. Than 175000 quality parts available. ????????? Please enquire with your machine serial number (VIN = Vehicle Identification Number) if you need to check suitability for your machine before purchasing. Leave us your request and we’ll be in touch ASAP. General products information 99% of our pictures are made by us in our photo studio across the years. Pieces on your machine = 2 Qty Not sure? Contact GREEN PLANT MACHINERY LTD Suite 6, Stirling House, Sunderland Quay, Culpeper Close, Medway City Estate, Rochester, Kent, ME2 4HN, United Kingdom?????????????? EXCAVATOR MOTOR DRIVE GEAR REDUCTION SET 1ST PLANET – 05/903805. Alternative, OEM & Genuine Parts for JCB Machinery. Than 175000 quality parts available. ???????? Suitablefor JCB excavator JS180, JS200, JS210, JS220 and more. Net Weight: 6.71 KG. Price is per one piece. Pieces on your machine = 2 Qty. Suite 6, Stirling House, Sunderland Quay, Culpeper Close. Medway City Estate, Rochester, Kent, ME2 4HN, United Kingdom. HIGHLANDS, IRELAND, CHANNEL ISLANDS, JERSEY, ISLE OF WIGHT and the following postcode areas AB31to>38, AB42to>56, BT>ALL, FK17to>22, G83, GY>ALL, HS1>9, IM>ALL, IV>ALL, JE>ALL, KA27to>28, KW>ALL, PA>ALL, PH5to>50, TR21to>25, ZE>ALL. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “greenplantmachinery” and is located in this country: GB. This item can be shipped worldwide.
Alternative, OEM & Genuine Parts For JCB Machinery. Than 175000 quality parts available. ? GEAR ANNULUS RING HUB FOR JCB – JCB PART NO. Suitable for JCB 2CX from year 1985 to 2000. Net Weight: 8 kg. Price is per one piece. Pieces on your machine = 4 Qty. Here are some answers. Please inquire with your machine serial number. (VIN = Vehicle Identification Number). If you need to check suitability for your machine before purchasing. Is not enough quantity? Please let us know and we will increase the quantity for you. Can’t find what you’re looking for? Leave us your request and we’ll be in touch. 99% of our pictures are made by us in our photo studio over the years. Trademarks JCB, PERKINS, etc. Used in our listings are the property of their respective owners and are used only for informational purposes. Green Plant Machinery LTD does not submit any rights to trademarks, company names, and products used in the content, in addition to its own. For Mainland UK only. Non-mainland UK addresses include the following. HIGHLANDS, IRELAND, CHANNEL ISLANDS, JERSEY, ISLE OF WIGHT and the following postcode areas. AB31to>38, AB42to>56, BT>ALL, FK17to>22, G83, GY>ALL, HS1>9, IM>ALL, IV>ALL, JE>ALL, KA27to>28, KW>ALL, PA>ALL, PH5to>50, TR21to>25, ZE>ALL. Packages may need to be signed for, or if the courier decides, left in a secure location. Please note that we do not deliver outside working hours, at weekends or Bank Holidays. Deliveries are Monday to Friday. Upon receipt, all products will be inspected and at our discretion, credit may be refused. All deliveries should be checked before signing the Driver’s sheet to avoid any’damage’ claims being rejected. In any case, all damages must be reported to us within 24 hours for us to raise any claims with our couriers. Any claims after 24 hours cannot be accepted. See our other items. 440/00704 GEAR ANNULUS RING HUB FOR JCB – JCB PART NO. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “greenplantmachinery” and is located in this country: GB. This item can be shipped worldwide.
JCB HYDRAULIC GEAR MOTOR 20/902000. BRAND NEW ORIGINAL UNIT. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “jcbpumps” and is located in this country: GB. This item can be shipped worldwide.
JCB HYDRAULIC GEAR MOTOR 20/925803. BRAND NEW ORIGINAL UNIT. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “jcbpumps” and is located in this country: GB. This item can be shipped worldwide.
More Options ...
Categories
Tag Cloud
Blog RSS
Comments RSS
Void « Default
Life 
Earth 
Wind 
Water 
Fire Light 
Previous Entries
Last 50 Posts
Back