Excavators

Mini Excavator with Closed Cabin in Stock USA. Engine: RATO engine, 13.5hp. Hydraulic pump is easy to maintain, long service life. Rubber track no damage to cement, tile floor. Multiple valves under the operating handle, the benefit of less effort and improved control is in your hands. The digging depth of 65inch make this machine works good for lot small works. This mini excavator including thumb clip.

This store AGT-STORE belongs to brand of AGROTK industrial, AGT industrial, MOWER KING. Our company is specialize in agricultural machinery, garden machinery, construction machinery, automotive and accessories. Hope you will have a wonderful time with us, thanks! Please also note that heavy goods will be delivered by truck, it may change to your local carrier if you’re in remote area. Transit time varies and depends on the carrier, we cannot be held responsible for delays caused by carriers. We will give you a response in 24 hours. All emails will be responded to within 12-24hours. (Unless stated otherwise in the listing). Light Equipment & Tools. Agrotk 13.5HP Mini Excavator Digger Tracked Crawler. Gas Briggs & Stratton Engine. Before purchasing, please confirm whether there is a forklift and other unloading capabilities, thanks! The work weight of the whole machine (KG) 810. Fighting capacity (m 0): 0.025. Low walking speed/high speed (km/h): 0-3.0. Climbing ability (%): 35. Ground -ground compression (KPA): 32. Maximum excavation radius (mm): 3040. Maximum excavation depth (mm): 1750. Maximum excavation height (MM): 3060. Maximum uninstallation height (MM): 1950. Transport length (mm): 2100. Transport width (mm): 947. Transportation height contains ceiling (mm): 2200. Ground clearance (mm) on the upper plate: 390. Fighting width (mm): 417. Bullet Board width (mm): 947. Main pump type/model: gear pump/06. Main pump brand. The rated setting pressure (MPA): 25. Maximum traffic (L/min): 23.4. Multi -road valve: 8 union multi -road valve. Multi -road valve brand. The rated setting pressure (MPA): 18. Maximum setting pressure (MPA): 18. Walking hydraulic motor type: R4K-310. Walking motor brand. Rotating liquid voltage motor type: RMR-315. Tension form mechanical tightness. Engine brand: Briggs & Stratton. Maximum horsepower (PS): 13.5. Maximum power (KW): 8.6. Maximum speed (RPM): 3600. Cooling method: wind and cold. Equal oil replacement volume (L): 1.1. Theoretical fuel consumption (L/H): 0.5-1.2. Rubber (bandwidthspacingnumber of sections): 1807237. Steel (bandwidthspacingnumber of sections): 1807237. Fuel tank (L): 6.6. Hydraulic fuel tank (L) :18. Thanks for your understanding. Please note that we have 3 brands TOPCAT, MOWER KING, AGROTK, products of these 3 brands are totally exactly the same. The carrier may changed to your local logistics if you’re in remote area. If you’re in a remote area, the carrier may be changed to your local logistics. We will do our effort to help you fix the problem. You may also like. View more great items.

TYPHON 18 FLEX Mini Excavator Key Features. Wide Range of Uses: Perfect for drilling, digging, grabbing, bull-dozing, ditch-cleaning, small excavations, rock-breaking, landscaping, and construction purposes. Versatility at its core, making it a multi-functional monster. Compact but Tough: Powered by a high-performance Kubota D722 engine. Withstands intensive construction projects without sacrificing performance. Reliable and easy maintenance. Retractable tracks for added flexibility. Designed for Small and Medium Projects: Specially engineered for small construction projects. Compact design ensures easy maneuverability in various environments: farms, gardens, public spaces, parks, orchards, and more. User-Friendly Design: Easy to manoeuvre, even for first-time users. 415mm wide bucket and platform ground clearance for hassle-free operation. Ideal for excavation, drilling, and bull-dozing jobs. Enhanced Features Included: Hydraulic joystick for precise control. Boom swing for increased maneuverability. Enclosed cabin for operator comfort and safety. Successful Projects at A Mini Scale: Ideal for public spaces, small construction sites, gardens, farms, orchards, municipal works, parks, roads, and landscaping. 0.04 cbm capacity standard digging bucket for efficient excavation. Performance Specifications: 1900 mm digging depth and 2900 mm digging height. 840 mm rotary radius for flexibility in confined spaces. Small but powerful Kubota D722 engine – 16.4HP at 3600RPM. Outstanding resistance and durability with water-cooling for the engine. Versatile Attachments: Comes with 10 attachments, offering a comprehensive solution for drilling, ditch-cleaning, trench digging, bull-dozing, grabbing, rock-breaking, and more. 10 attachments such as Standard digging excavator bucket, Auger, Concrete breaker, Quick hitch, Hydraulic thumb clip, 200mm trenching bucket, 500mm grading bucket, Rake, Screening Bucket, Ripper. 1 x Tool box. 1 x Enclosed cabin. 1 x Digital manual with comprehensive instructions. Listing and template services provided by inkFrog.

NEW – JSC160 Plate Compactor 36″ x 48″ Base Plate. Fits Cat 320 -Cat 325 Excavators.

This Kubota mini excavator boasts a powerful diesel engine that ensures reliable performance and longevity. Its compact size and lightweight design make it perfect for maneuvering in tight spaces, while the pilot controls add versatility to any job site. With a model year of 2024 and an operating weight of 3,000 – 4,000 lbs, this machine is ideal for excavating tasks that require precision and efficiency. The NDI322-canopy model comes equipped with a range of features and capabilities that make it a great addition to any heavy equipment fleet. Max dig depth of 6′1” – 7′ ensures the ability to dig deep, while the make and equipment type ensure durability and reliability. This mini excavator is perfect for use in construction, landscaping, and more. 100in x 37in x 81in. 37in (track does not extend). (1) 14 Bucket, (1) Hydraulic Thumb Clip. PLEASE MESSAGE US WITH ANY QUESTIONS OR TO SCHEDULE AN APPOINTMENT TO VIEW. Total Weight: 2827 lbs (1282 kg). Digging Radius: 118 (10 ft). Total Length: 100 (8 ft). Digging Depth: 58 (5 ft). Total Height: 37 (3 ft). Digging Height: 103 (8.5 ft). Total Length: 81 (6.75 ft). Dumping Height: 69 (5.75 ft). Engine Brand: Kubota (diesel) – water based cooling system. Output power: 10.2kw. Walking speed: 0-1.5km/h. 600mm Titling Bucket (one cylinder). 800mm Titling Bucket (one cylinder). 1000mm Titling Bucket (one cylinder). The fuselage (made from a single piece of steel plate) has multiple inspection ports for efficient machine inspection and maintenance. Machine is not returnable or refundable! It is important to take into account that we can only facilitate deliveries to destinations equipped with a Loading Dock and/or Forklift. Each one of our machines is meticulously assembled, rigorously inspected for optimal performance, and thoughtfully packaged before it leaves our facility. We assure you; it’ll be worth the wait!

Replacement Muffler Silencer 4416602 Fits Hitachi & Fits John Deere Excavators. One (1) Aftermarket Replacement Muffler Silencer. Fits Hitachi Excavator Models: IZX200, IZX200LC, IZX210F, IZX210MF, MA200-G, ZR900TS, ZX125W, ZX200, ZX200-3-HCMC, ZX200-3G, ZX200-EMZX200-HHE, ZX200-X, ZX200LC-HHE, ZX210-AMS, ZX210-HCME, ZX210H, ZX210H-3G, ZX210K, ZX210K-3G, ZX210N-AMS, ZX210N-HCME, ZX210W, ZX210W-AMS, ZX240-AMS, ZX240-HCME. Fits John Deere Excavator Model. Inlet Diameter(mm): 84. Outlet Diameter(mm): 90. Replaces Part Number: 4416602. Reliable Aftermarket Parts, your trusted source for a wide range of replacement parts catering to various outdoor equipment. We specialize in providing top-quality replacement parts for Lawn and Garden, Snow Removal, UTV, ATV, and Golf Cart machinery. Our extensive inventory includes replacement parts for Backhoes, Crawlers, Excavators, Tractors, Skid Steers, and more, covering most leading brands and models in the industry. If you have any inquiries or require assistance, please don’t hesitate to reach out. PLEASE SAVE ALL ORIGINAL PACKAGING. ! If you receive an item that is not as described in the listing. Many things can play a factor such as Location, Weather, and the items in the order. If you have any questions, please reach out to us before ordering. How do I know if my order was submitted properly? PLEASE SAVE ALL ORIGINAL PACKAGING. Normally same day if before 1PM EST. Brands Fit: John Deere, Allis Chalmers, Ford/New Holland, Case, Massey Ferguson & More! Parts For: Allis Chalmers, International Harvester, Caterpillar, Komatsu & More. Brands Fit: Bad Boy, Briggs & Stratton, Cub Cadet, Honda, Sears, Snapper & More! Parts For: Ariens, Briggs & Stratton, Jacobsen, Toro, Troy Built, Sears & More! Can’t track down a part that you need? Need help with a part you found? Contact our expertly trained customer service staff.

2005 Caterpillar 330C L. Overall engine appearance is clean and dry, with a few areas of dried seepage. Transmission components are in good condition; no unusual noises or vibrations during operation. Chassis and frame are in good condition; level stance. Tracks have approximately 50% life remaining. The tracks, idlers and rollers all have a good amount of life left. No obvious signs of major issues observed. Hydraulic lines and fittings are clean and in good condition; no unusual noises during operation. Operator displays and controls are functioning and in good condition. Bucket shows normal wear. Signs of minor leakage at most hydraulic cylinder rod seals. Minor, dried residual oil build up around engine valve cover. Horn not functioning properly. Visible dents to body panels; minor cosmetic wear to cabin surfaces, floors, panels, and ceiling. The 2005 Caterpillar 330CL is a robust excavator, powered by a CAT C9 diesel engine. It features a 24 bucket, hydraulic coupler, and an enclosed cab with A/C, heat, and radio for operator comfort. Despite its 10,015 hours of operation, the machine remains in good condition, with a functioning transmission and hydraulic system. The undercarriage and tracks are also in good shape, with about 50% life remaining. The inspection reported a few signs of wear, including minor engine oil leaks, engine smoke under throttle, a malfunctioning horn, and some cosmetic damage to the body and cabin. Engine: CAT C9 – 8.8L – 6Cyl. 345 HP – Diesel. Fuel Capacity: 163 gal. 2 Speed Hydrostatic Transmission. Maximum Hydraulic Pressure (Implements): 4,974 psi. Standard CAT Track Undercarriage. Track Shoe Width: 34. Operating Weight: 77,400 lbs. More information about this equipment. For your convenience, we’ve included these documents free to download so you can make the best decision. The Boom & Bucket difference. Rest easy knowing that if something isn’t right with your equipment we’ll stand behind it 100%. We never mark up the cost of transportation – the price we quote you is the price that gets paid to the transport company. Get access to competitive rates with fast turnaround times. You can finance almost any type of equipment. We have partners that specialize in late model and lower hour machines as well as older and higher hour units. You can also use the financing for payroll, invoices, and general growth capital. Our mission is to be the most trusted marketplace for all things heavy equipment. We earn that trust through transparency, fairness, and guarantees backed by world-class technology and outstanding customer service. YOU HEARD IT HERE FIRST! Real customers, real satisfaction. Boom & Bucket works with several logistics partners that get your equipment to you safely, on time, and on budget, anywhere in the United States. All items are fully insured & permitted during transportation. All sales are final. We Are Happy To Assist You! Please Message Us For Further Assistance. The digital dealer for all things heavy equipment. We accept ACH and Wire payments for all equipment.

Engine Starter Fits John Deere Excavator Yanmar Engine 3TN78L. Not sure will this part fit? We can search quickly and confirm or find you the correct one! You need correct replacement? Just let us know and our parts specialist will help right away!