Disclaimer
The opinions expressed herein are my own personal opinions and do not represent anyone else's view in any way, including those of my employer.
© Copyright 2023
The opinions expressed herein are my own personal opinions and do not represent anyone else's view in any way, including those of my employer.
© Copyright 2023
2013 CAT 301.4C OROPS MINI TRACK EXCAVATOR PIN BUCKET & STRA. Machine Highlights Year: 2013 Make: CAT Model: 301.4C OROPS Front Aux Hyd 10″ Pin On Bucket Variable Width Tracks Straight Blade 17HP Max Dig Depth: 7′8″ Operating Weight: 3,236LBS Hours: 197 Serial Number: CAT3014CHLJK01041 Engine Make: Yanmar Model: 3TNV76 Gross Power: 24.3hp Net Power: 17.7hp Displacement: 68.1cu in Rated Net Power – ISO 9249: 17.7hp Operating Specifications Machine Overhang: 16.7in Stick Length – Standard: 37.1″ Operating Weight: 3,236LBS Hydraulic System Operating Pressure – Swing: 2176 psi Operating Pressure – Equipment: 2901 psi Operating Pressure – Travel: 2901 psi Pump Flow at 2,200 rpm: 9.2 gal/min Maximum Bucket Force: 3,597LBS Maximum Stick Force: 1,596LBS Blade Height: 9.1in Width: 3.3ft in Lift Height: 8.3in Dig Depth: 10.4in Service Refill Capacities Fuel Tank Capacity: 6.3gal Hydraulic Tank Capacity: 5.3gal Travel System Gradeability: 30 degrees/58% Travel Speed – 1st Gear: 1.5mph Track Width: 9.1in Travel Speed – 2nd Gear: 2.5mph Dimensions Height: 7.5ft in Width: 2.4ft in Undercarriage Width – Retracted: 3.3ft in Undercarriage Width – Extended: 4.3ft in Maximum Digging Depth: 7.8ft in Tail Swing Radius: 3.6ft in Maximum Vertical Digging Depth: 5.4ft in Maximum Digging Height: 11.6ft in Maximum Dumping Height: 8.3ft in Maximum Digging Radius: 12.7ft in Maximum Reach – On the Ground: 12.5ft in Maximum Lift of Dozer Blade Above Ground: 8.3in Maximum Digging Depth – Dozer Blade Below Ground: 10.4in Track Length: 4.8ft in Maximum Swing Angle of Boom System to the Right: 49 degrees Maximum Swing Angle of Boom System to the Left: 73 degrees Minimum Boom Swing Radius: 4.9ft in 2013 CAT 301.4C OROPS MINI TRACK EXCAVATOR, VARIABLE WIDTH TRACKS, FRONT AUX, 10″ PIN ON BUCKET, STRAIGHT BLADE, 17HP, MAX DIG DEPTH OF 7′8, AND AN OPERATING WEIGHT OF 3,042LBS! BANK FINANCING IS AVAILABLE! Providence equipment offers a variety of financing options to meet your expectation equipment purchasing needs. Our financing process is quick and can be customized to fit your financial situation. Providence Equipment, LLC assumes no liability for errors or omissions in this listing. Expressly excluded are warranties of merchantability, fitness for use and purpose and description. (Hour meter readings or mileages represented) are unverified information and accuracy is expressly not guaranteed in any way by Providence. All sales are final. Any information is gathered from sources believed to be reliable but is not guaranteed to be accurate. Item descriptions and listings are subject to change, correction, update or cancellation at any time, without notice. Terms of Sale Overview. We only accept wires and certified funds. ALL FUNDS MUST CLEAR THE BANK BEFORE THE ITEM MAY BE PICKED UP. Providence Equipment, LLC reserves the right to. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in this country: US. This item can be shipped to United States.
2013 CAT 301.4C OROPS MINI TRACK EXCAVATOR W/ FRONT AUX. Machine Highlights Year: 2013 Make: CAT Model: 301.4C Front Aux Hyd Variable Width Tracks Straight Blade 17HP Max Dig Depth: 7′8″ Operating Weight: 3,236LBS Hours: 1625 Serial Number: CAT3014CHLJK01136 Engine Make: Yanmar Model: 3TNV76 Gross Power: 24.3hp Net Power: 17.7hp Displacement: 68.1cu in Rated Net Power – ISO 9249: 17.7hp Operating Specifications Machine Overhang: 16.7in Stick Length – Standard: 37.1″ Operating Weight: 3,236LBS Hydraulic System Operating Pressure – Swing: 2176 psi Operating Pressure – Equipment: 2901 psi Operating Pressure – Travel: 2901 psi Pump Flow at 2,200 rpm: 9.2 gal/min Maximum Bucket Force: 3,597LBS Maximum Stick Force: 1,596LBS Blade Height: 9.1in Width: 3.3ft in Lift Height: 8.3in Dig Depth: 10.4in Service Refill Capacities Fuel Tank Capacity: 6.3gal Hydraulic Tank Capacity: 5.3gal Travel System Gradeability: 30 degrees/58% Travel Speed – 1st Gear: 1.5mph Track Width: 9.1in Travel Speed – 2nd Gear: 2.5mph Dimensions Height: 7.5ft in Width: 2.4ft in Undercarriage Width – Retracted: 3.3ft in Undercarriage Width – Extended: 4.3ft in Maximum Digging Depth: 7.8ft in Tail Swing Radius: 3.6ft in Maximum Vertical Digging Depth: 5.4ft in Maximum Digging Height: 11.6ft in Maximum Dumping Height: 8.3ft in Maximum Digging Radius: 12.7ft in Maximum Reach – On the Ground: 12.5ft in Maximum Lift of Dozer Blade Above Ground: 8.3in Maximum Digging Depth – Dozer Blade Below Ground: 10.4in Track Length: 4.8ft in Maximum Swing Angle of Boom System to the Right: 49 degrees Maximum Swing Angle of Boom System to the Left: 73 degrees Minimum Boom Swing Radius: 4.9ft in 2013 CAT 301.4C OROPS MINI TRACK EXCAVATOR, VARIABLE WIDTH TRACKS, FRONT AUX, STRAIGHT BLADE, 17HP, MAX DIG DEPTH OF 7′8, AND AN OPERATING WEIGHT OF 3,042LBS! BANK FINANCING IS AVAILABLE! Providence equipment offers a variety of financing options to meet your expectation equipment purchasing needs. Our financing process is quick and can be customized to fit your financial situation. Providence Equipment, LLC assumes no liability for errors or omissions in this listing. Expressly excluded are warranties of merchantability, fitness for use and purpose and description. (Hour meter readings or mileages represented) are unverified information and accuracy is expressly not guaranteed in any way by Providence. All sales are final. Any information is gathered from sources believed to be reliable but is not guaranteed to be accurate. Item descriptions and listings are subject to change, correction, update or cancellation at any time, without notice. Terms of Sale Overview. We only accept wires and certified funds. ALL FUNDS MUST CLEAR THE BANK BEFORE THE ITEM MAY BE PICKED UP. Providence Equipment, LLC reserves the right to. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in this country: US. This item can be shipped to United States.
3510 S Manning Rd. El Reno Oklahoma 73036. 15 Caterpillar 301.4C Mini Ex Small Compact Excavator 7. Options and Standard Features. Trim: Mini Ex Small Compact Excavator 703Hrs 24Hp 3300lb. Net Horsepower (HP): 24. Operating Weight: 3,000 – 4,000 lbs. Dig Depth: 7′1” – 8. OT Truck and Tractor Sales. Equipment prices are at our location. Generally can have a quote withing 30 minutes. OT Truck and Tractor Sales reserves the right to. OT Truck and Tractor Sales welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “ot-tractors” and is located in this country: US. This item can be shipped to United States.
2013 CAT 301.4C OROPS MINI TRACK EXCAVATOR, STRAIGHT BLADE. Machine Highlights Year: 2013 Make: CAT Model: 301.4C Front Aux Hyd Variable Width Tracks Straight Blade 17HP Max Dig Depth: 7′8″ Operating Weight: 3,236LBS Hours: 185 Serial Number: CAT3014CPLJK01045 Engine Make: Yanmar Model: 3TNV76 Gross Power: 24.3hp Net Power: 17.7hp Displacement: 68.1cu in Rated Net Power – ISO 9249: 17.7hp Operating Specifications Machine Overhang: 16.7in Stick Length – Standard: 37.1″ Operating Weight: 3,236LBS Hydraulic System Operating Pressure – Swing: 2176 psi Operating Pressure – Equipment: 2901 psi Operating Pressure – Travel: 2901 psi Pump Flow at 2,200 rpm: 9.2 gal/min Maximum Bucket Force: 3,597LBS Maximum Stick Force: 1,596LBS Blade Height: 9.1in Width: 3.3ft in Lift Height: 8.3in Dig Depth: 10.4in Service Refill Capacities Fuel Tank Capacity: 6.3gal Hydraulic Tank Capacity: 5.3gal Travel System Gradeability: 30 degrees/58% Travel Speed – 1st Gear: 1.5mph Track Width: 9.1in Travel Speed – 2nd Gear: 2.5mph Dimensions Height: 7.5ft in Width: 2.4ft in Undercarriage Width – Retracted: 3.3ft in Undercarriage Width – Extended: 4.3ft in Maximum Digging Depth: 7.8ft in Tail Swing Radius: 3.6ft in Maximum Vertical Digging Depth: 5.4ft in Maximum Digging Height: 11.6ft in Maximum Dumping Height: 8.3ft in Maximum Digging Radius: 12.7ft in Maximum Reach – On the Ground: 12.5ft in Maximum Lift of Dozer Blade Above Ground: 8.3in Maximum Digging Depth – Dozer Blade Below Ground: 10.4in Track Length: 4.8ft in Maximum Swing Angle of Boom System to the Right: 49 degrees Maximum Swing Angle of Boom System to the Left: 73 degrees Minimum Boom Swing Radius: 4.9ft in 2013 CAT 301.4C OROPS MINI TRACK EXCAVATOR, VARIABLE WIDTH TRACKS, FRONT AUX, STRAIGHT BLADE, 17HP, MAX DIG DEPTH OF 7′8, AND AN OPERATING WEIGHT OF 3,042LBS! BANK FINANCING IS AVAILABLE! Providence equipment offers a variety of financing options to meet your expectation equipment purchasing needs. Our financing process is quick and can be customized to fit your financial situation. Providence Equipment, LLC assumes no liability for errors or omissions in this listing. Expressly excluded are warranties of merchantability, fitness for use and purpose and description. (Hour meter readings or mileages represented) are unverified information and accuracy is expressly not guaranteed in any way by Providence. All sales are final. Any information is gathered from sources believed to be reliable but is not guaranteed to be accurate. Item descriptions and listings are subject to change, correction, update or cancellation at any time, without notice. Terms of Sale Overview. We only accept wires and certified funds. ALL FUNDS MUST CLEAR THE BANK BEFORE THE ITEM MAY BE PICKED UP. Providence Equipment, LLC reserves the right to. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in this country: US. This item can be shipped to United States.
4435 St Hwy 274. 2013 CAT 301.4C OROPS MINI TRACK EXCAVATOR, VARIABLE WIDTH TRACKS, FRONT AUX, 10″ PIN ON BUCKET, STRAIGHT BLADE, 17HP, MAX DIG DEPTH OF 7′8″, AND AN OPERATING WEIGHT OF 3,042LBS! Options and Standard Features. 10 Pin On Bucket. Max Dig Depth: 7′8. Operating Weight: 3,236LBS. Gross Power: 24.3Hp. Net Power: 17.7Hp. Displacement: 68.1Cu In. Rated Net Power – ISO 9249: 17.7Hp. Operating Pressure – Swing: 2176 Psi. Operating Pressure – Equipment: 2901 Psi. Operating Pressure – Travel: 2901 Psi. Pump Flow At 2,200 Rpm: 9.2 Gal/Min. Maximum Bucket Force: 3,597LBS. Maximum Stick Force: 1,596LBS. Travel Speed – 1St Gear: 1.5Mph. Track Width: 9.1In. Travel Speed – 2Nd Gear: 2.5Mph. Height: 7.5Ft In. Width: 2.4Ft In. Undercarriage Width – Retracted: 3.3Ft In. Undercarriage Width – Extended: 4.3Ft In. Maximum Digging Depth: 7.8Ft In. Tail Swing Radius: 3.6Ft In. Maximum Vertical Digging Depth: 5.4Ft In. Maximum Digging Height: 11.6Ft In. Maximum Dumping Height: 8.3Ft In. Maximum Digging Radius: 12.7Ft In. Maximum Reach – On The Ground: 12.5Ft In. Maximum Lift Of Dozer Blade Above Ground: 8.3In. Maximum Digging Depth – Dozer Blade Below Ground: 10.4In. Track Length: 4.8Ft In. Maximum Swing Angle Of Boom System To The Right: 49 Degrees. Maximum Swing Angle Of Boom System To The Left: 73 Degrees. Minimum Boom Swing Radius: 4.9Ft In. Machine Overhang: 16.7In. Stick Length – Standard: 37.1. Fuel Tank Capacity: 6.3Gal. Hydraulic Tank Capacity: 5.3Gal. BANK FINANCING IS AVAILABLE! Only 55 miles South East of Dallas. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in this country: US. This item can be shipped to United States.
4435 St Hwy 274. 2013 CAT 301.4C OROPS MINI TRACK EXCAVATOR, VARIABLE WIDTH TRACKS, FRONT AUX, STRAIGHT BLADE, 17HP, MAX DIG DEPTH OF 7′8, AND AN OPERATING WEIGHT OF 3,042LBS! Options and Standard Features. Max Dig Depth: 7′8. Operating Weight: 3,236LBS. Gross Power: 24.3Hp. Net Power: 17.7Hp. Displacement: 68.1Cu In. Rated Net Power – ISO 9249: 17.7Hp. Operating Pressure – Swing: 2176 Psi. Operating Pressure – Equipment: 2901 Psi. Operating Pressure – Travel: 2901 Psi. Pump Flow At 2,200 Rpm: 9.2 Gal/Min. Maximum Bucket Force: 3,597LBS. Maximum Stick Force: 1,596LBS. Travel Speed – 1St Gear: 1.5Mph. Track Width: 9.1In. Travel Speed – 2Nd Gear: 2.5Mph. Height: 7.5Ft In. Width: 2.4Ft In. Undercarriage Width – Retracted: 3.3Ft In. Undercarriage Width – Extended: 4.3Ft In. Maximum Digging Depth: 7.8Ft In. Tail Swing Radius: 3.6Ft In. Maximum Vertical Digging Depth: 5.4Ft In. Maximum Digging Height: 11.6Ft In. Maximum Dumping Height: 8.3Ft In. Maximum Digging Radius: 12.7Ft In. Maximum Reach – On The Ground: 12.5Ft In. Maximum Lift Of Dozer Blade Above Ground: 8.3In. Maximum Digging Depth – Dozer Blade Below Ground: 10.4In. Track Length: 4.8Ft In. Maximum Swing Angle Of Boom System To The Right: 49 Degrees. Maximum Swing Angle Of Boom System To The Left: 73 Degrees. Minimum Boom Swing Radius: 4.9Ft In. Machine Overhang: 16.7In. Stick Length – Standard: 37.1. Fuel Tank Capacity: 6.3Gal. Hydraulic Tank Capacity: 5.3Gal. BANK FINANCING IS AVAILABLE! Only 55 miles South East of Dallas. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in this country: US. This item can be shipped to United States.
4435 St Hwy 274. 2013 CAT 301.4C OROPS MINI TRACK EXCAVATOR, VARIABLE WIDTH TRACKS, FRONT AUX, STRAIGHT BLADE, 17HP, MAX DIG DEPTH OF 7′8, AND AN OPERATING WEIGHT OF 3,042LBS! Options and Standard Features. Max Dig Depth: 7′8. Operating Weight: 3,236LBS. Gross Power: 24.3Hp. Net Power: 17.7Hp. Displacement: 68.1Cu In. Rated Net Power – ISO 9249: 17.7Hp. Operating Pressure – Swing: 2176 Psi. Operating Pressure – Equipment: 2901 Psi. Operating Pressure – Travel: 2901 Psi. Pump Flow At 2,200 Rpm: 9.2 Gal/Min. Maximum Bucket Force: 3,597LBS. Maximum Stick Force: 1,596LBS. Travel Speed – 1St Gear: 1.5Mph. Track Width: 9.1In. Travel Speed – 2Nd Gear: 2.5Mph. Height: 7.5Ft In. Width: 2.4Ft In. Undercarriage Width – Retracted: 3.3Ft In. Undercarriage Width – Extended: 4.3Ft In. Maximum Digging Depth: 7.8Ft In. Tail Swing Radius: 3.6Ft In. Maximum Vertical Digging Depth: 5.4Ft In. Maximum Digging Height: 11.6Ft In. Maximum Dumping Height: 8.3Ft In. Maximum Digging Radius: 12.7Ft In. Maximum Reach – On The Ground: 12.5Ft In. Maximum Lift Of Dozer Blade Above Ground: 8.3In. Maximum Digging Depth – Dozer Blade Below Ground: 10.4In. Track Length: 4.8Ft In. Maximum Swing Angle Of Boom System To The Right: 49 Degrees. Maximum Swing Angle Of Boom System To The Left: 73 Degrees. Minimum Boom Swing Radius: 4.9Ft In. Machine Overhang: 16.7In. Stick Length – Standard: 37.1. Fuel Tank Capacity: 6.3Gal. Hydraulic Tank Capacity: 5.3Gal. BANK FINANCING IS AVAILABLE! Only 55 miles South East of Dallas. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in this country: US. This item can be shipped to United States.
2017 Caterpillar 301.4C mini excavator for sale in Texas, 17.7HP diesel engine, digs 7′7, very clean unit! Swing boom, plumbed with auxiliary hydraulics. Backfil blade folds and extends for gate access into back yards and the tracks retract also! This unit only weighs 3,042 lbs for easy trailering! The bucket is a 12 digging style with great teeth and side cutters! The tracks are like new as pictured! The item “2017 Cat 301.4C Mini Excavator ONLY 474 HOURS! Clean! Financing + Shipping TX” is in sale since Thursday, July 9, 2020. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “genuinesalesco” and is located in Magnolia, Texas. This item can’t be shipped, the buyer must pick up the item.
4435 St Hwy 274. Options and Standard Features. Max Dig Depth 78. Gross Power: 24.3Hp. Net Power: 17.7Hp. Displacement: 68.1Cu In. Engine Model: Yanmar 3TNV76. Rated Net Power – ISO 9249: 17.7Hp. Operating Pressure Swing: 2176 Psi. Operating Pressure Equipment: 2901 Psi. Operating Pressure Travel: 2901 Psi. Pump Flow At 2,200 Rpm: 9.2 Gal/Min. Maximum Bucket Force: 3597Lb. Maximum Stick Force: 1596Lb. Travel Speed – 1St Gear: 1.5Mph. Track Width: 9.1In. Travel Speed – 2Nd Gear: 2.5Mph. Dimensions (Approximate) – Long Stick. Height: 7.5Ft In. Width: 2.4Ft In. Undercarriage Width Retracted: 3.3Ft In. Undercarriage Width Extended: 4.3Ft In. Maximum Digging Depth: 7.8Ft In. Tail Swing Radius: 3.6Ft In. Maximum Vertical Digging Depth: 5.4Ft In. Maximum Digging Height: 11.6Ft In. Maximum Dumping Height: 8.3Ft In. Maximum Digging Radius: 12.7Ft In. Maximum Reach – On The Ground: 12.5Ft In. Maximum Lift Of Dozer Blade Above Ground: 8.3In. Maximum Digging Depth – Dozer Blade Below Ground: 10.4In. Width: 3.3Ft In. Lift Height: 8.3In. Dig Depth: 10.4In. Machine Overhang: 16.7In. Stick Length Standard: 37.1In. Stick Length Long: 43.2In. Fuel Tank Capacity: 6.3Gal. Hydraulic Tank Capacity: 5.3Gal. Note: Weights Do Not Include Worktools. Operating Weight – With Cab: 3241Lb. Operating Weight – With Canopy: 3042Lb. Operating Weight – With Cab And Extending Undercarriage: 3435Lb. Operating Weight – With Canopy And Extending Undercarriage: 3236Lb. Extending Undercarriage and Blade An extending undercarriage and fold out dozer blade allow the machine to be configured for excellent working stability and optimum performance. Blade extensions simply rotate and lock out of the way using retained pins eliminating the potential for lost parts. MONTHLY MACHINE RENTAL AVAILABLE! MACHINE VIDEO UPON REQUEST! Applying for a vehicle loan online is one of the quickest and easiest application methods. Our secure application is easy to complete, all you need are a few personal and employment details. Only 55 miles South East of Dallas. Check out similar vehicles in our inventory. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. Create Professional Listings Fast and Easy. The item “2015 CAT 301.4C TELESCOPING MINI TRACK EXCAVATOR, OPEN ROPS, 12 BUCKET” is in sale since Monday, August 5, 2019. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in Trinidad, Texas. This item can be shipped worldwide.
CAT 301.4C / 301.6C / 301.8C Bucket Pin And Bush Set. Full Bucket Pin & Bush kit to fit CAT 301.4C / 301.6C / 301.8C. Included in the kit is the following components: 2 x Bucket Pins 4 x Bucket Bushes 4 x 1mm Steel Shims 2 x 6mm Lynch/Linch Pins This kit is designed to fit the following diggers. Can’t find what you want? We supply Mini Digger / Excavator buckets, Rubber Tracks, Pins & Bushes, Undercarriage parts plus many more! This item can be collected from our warehouse in East Yorkshire! ALL ORDERS PLACED AFTER THE 21/12/17 WILL NOT BE DESPATCHED TILL THE 03/01/2018. The item “Bucket Pin and Bush set to fit CAT 301.4C / 301.6C / 301.8C” is in sale since Wednesday, August 2, 2017. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “rhinox-group-ltd” and is located in North Newbald. This item can be shipped to United Kingdom, North, South, or Latin America, Ireland, Germany, France, Italy, Spain.
More Options ...
Categories
Tag Cloud
Blog RSS
Comments RSS
Void « Default
Life 
Earth 
Wind 
Water 
Fire Light 
Previous Entries
Last 50 Posts
Back