Disclaimer
The opinions expressed herein are my own personal opinions and do not represent anyone else's view in any way, including those of my employer.
© Copyright 2020
The opinions expressed herein are my own personal opinions and do not represent anyone else's view in any way, including those of my employer.
© Copyright 2020
Powerfab prototype micro excavator – YouTube. We currently manufacture in the UK and sell there and throughout Europe. We manufactured mini diggers since the start in the 1980’s. This is a 360 slew digger with a unique low cost slewing system. You dont have to pay for an expensive slew ring. There was considerable technical obstacles to overcome and this was not cheap, get a bargain special offer, firesale, limited time. The design is well thought through, the wheels come off and fit inside the chassis when it needs to go through a narrow access like a doorway 76cm. On this page below you will see the BROCHURE, VIDEOS and further information. We hope to manufacture a 4 wheel drive version in the USA until then you can take advantage of these plans for sale. It maybe that you can weld or know of a local welder. This two wheeled mini excavator has 360 degree slew, digging over its wheels means it can use its anchors to hold itself and utilise a tearout force of 1 tonne solving tough digging, trenching and excavating problems. Accessing remote locations and narrow gaps it is only 30 wide and as it weighs 550 lbs it can be towed over rough terrain by a quad bike or 4WD with ease. It can also be towed on road. The 2 wheel version when on site uses its hydraulic excavating arm to pull itself forward, backwards or side to side. As said as it is 360 degree it can then dig over its wheels and utilise the rear spades as anchors (this is very important) resulting in a very good tearout force. It is ideal for homeowners, farmers, landscapers, plumbers and contractors. The APPROXIMATE specification is a 1 tonne digging force, 4′11 digging depth and dumping height, 360 degree slew, 9hp petrol engine or option for diesel, Width 30. The item “PLANS DRAWINGS 360 SLEW MINI EXCAVATOR, TRENCH DIGGER, TOWABLE ON ROAD POWERFAB” is in sale since Sunday, March 3, 2019. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “power-fab” and is located in Ammanford. This item can be shipped worldwide.
No part of the plans may be reproduced or transmitted in any form or by any means, electronic or mechanical including photocopying without written permission from us. These drawings and plans are for personal use and not for commercialisation or production of the product. TOWABLE MINI DIGGER DRIVE PLANS SENT ELECTRONICALLY AS PDF FILES, DELIVERED SAME DAY! THERE ARE PLANS AND DRAWINGS AND OTHER HINTS AND TIPS TO BUILD THE UNTILMATE TOWABLE MINI EXCAVATOR. HOWEVER THESE ARE TO HELP YOU NOT TO BUILD IT FOR YOU. WE WILL BE ON HAND TO HELP YOU THROUGH BUILD AND ANSWER THE ODD QUESTION NOW AND THEN HOWEVER THIS IS YOUR PROJECT AND YOU WILL BE REQUIRED TO LOOK UP SOME DIMENSIONS AND EVEN WORK OUT ONE OR TWO THINGS OUT FOR YOURSELF! THIS IS YOUR PROJECT AND IT CAN BE FUN BUT WILL ALSO BE WORK. Sorry most of our customers are very happy but there is always the odd one who takes the biscuit. This advert is for a set of plans, for hydraulic front wheel DRIVE. Designed and developed using our 30 years expertise, the new Powerfab 180 is engineered utilising the knowledge we acquired not just designing but also manufacturing and marketing thousands of towable excavators around the world including America, Australia, Canada, Europe…. The Powerfab 180 offers features and innovations not found on other wheeled mini excavators. The chassis is built to allow narrow access (will fit through the doorway of a house), deep digging ability and 180 degree slew. It has reinforced axles and mulipoint front and rear plates that enable you to add the following optional extras as and when you require. Skid steer hydrostatic drive. Self leveling (VDS) greater digging efficiency. Rear anchor for increased tearout force. Hydraulic Power Take Off (HPTO) to operate accessories such as post hole borers, machine mounted breakers, concrete saws. See the video on the link for more information. The wheeled mini excavator solves digging, trenching and excavating problems and accessing remote locations. With our hydraulic drive kit it can move itself on and off road, it can also use its hydraulic excavating arm to pull itself forward. It can quickly excavate on the roadside whilst still hitched to a van or can be towed by a 4×4 to remote locations and able to work independently of the towing vehicle. It is ideal for homeowners, farmers, landscapers, plumbers, electrical contractors and government maintenance contractors. This advert is for a set of PLANS Digs 5-6′ Depth 8′- 10′ Reach 7′ Loading Height 2600lb – 3000lb Ripping Power 2000 psi Operating Pressure 120 Degree Lateral Swing 8 HP Engine 14 Bucket Engineered drawings and assembly instructions Parts listing. Only one machine produced should you want to be a distributor please ask. If you do not accept this liability, do not build this towable backhoe. There is no technical assistance with these plans. These plans are for informational purposes only and do not purport to cover all deatails or variations in design, nor provide for every possible contingency to be met during constructions or operations. Should problems arise that are not covered in these plans or further assistance be needed, purchaser should seek professional help. The item “PLANS FOR TRUCK HOE BACKHOE MINI EXCAVATOR, TRENCH DIGGER, AND 2 WD” is in sale since Monday, December 18, 2017. This item is in the category “Industrial\Heavy Machinery\Excavators”. The seller is “power-fab” and is located in Swansea. This item can be shipped worldwide.
ALL MACHINES HAVE THE 2 LEVER JOY STICK CONTROL VALVES AND STEEL WIRE COVERED HYDRAULIC LINES. Every detail including the thick, box-beam steel frame, the reinforced hydraulic lines, the easy to use controls which have been upgraded to a two joystick controller system which makes the machine user friendly and easier to operate. No matter how tough your task, this back hoe. Is made to dig and built to last. For ripping or lifting, you could leave the tow vehicle attached to provide extra anchorage if needed. We have all parts in stock as well. Here’s some customer reviews to read as well. Great Machine, Great Folks to deal with, Highly Recomended!!! Reat little machine got to run it & I love it—renagator. Product as described, great to work with, highly recomended, thank you. Great company to deal with Dont Hesitate! Operating radius of 130 degrees. Dump height 7 – 8 feet. 9HP GAS ENGINE runs the hydraulic pump. Strong hydraulic pump. 4 double action hydrolic cylinders. Max lifting weight 1,800 lbs. Ripping force 4,500 lbs. Measurements: NO EXTRA CHARGE FOR LIFT GATE TRUCK WHEN WE DELIVER TO A RESIDENCE! Total lenght = ca. Width of the red frame = ca. Max heigth = 6′5ca. Weight crated = 1175lbs. Thank you for your interest. DELIVERIES TAKE IN MOST CASES 6 – 14 DAYS. DEPENDING ON YOUR AREA. CALL FOR TRACKING 619 887 2137. The item “TOWABLE MINI BACKHOE WITH 10and14 TRENCH BUCKETS, MINI EXCAVATOR” is in sale since Friday, October 20, 2017. This item is in the category “Business & Industrial\Heavy Equipment Attachments\Backhoe Attachments”. The seller is “bikefarmjoe” and is located in Chula Vista, California. This item can be shipped to United States.
ALL MACHINES HAVE THE 2 LEVER JOYSTICKS CONTROL VALVE and STEEL WIRE COVERED HYDRAULIC LINES. We have 14” and 24 buckets and a thumb available. Every detail including the thick, box-beam steel frame, the reinforced hydraulic lines, the easy to use controls which have been upgraded to a two lever joystick controller system which makes the machine user friendly and easier to operate. No matter how tough your task, this back hoe. Is made to dig and built to last. We have all parts in stock as well. Here’s some customer reviews to read as well. This backhoe comes with a 10” trench bucket. Great Machine, Great Folks to deal with, Highly Recomended!!! Reat little machine got to run it & I love it—renagator. Product as described, great to work with, highly recomended, thank you. Great company to deal with Dont Hesitate! Operating radius of 130 degrees. Dump height 5-6 feet. 9HP GAS ENGINE runs the hydraulic pump. Strong hydraulic pump. 4 double action hydrolic cylinders. Max lifting weight 1,800 lbs. Ripping force 4,500 lbs. Digs 7 feet deep. Reach = up to 8 feet. Total lenght = ca. Width of the red frame = ca. Max heigth = 6′5ca. Weight crated = 1212lbs. Thank you for your interest. DELIVERIES TAKE IN MOST CASES 6 – 14 DAYS. DEPENDING ON YOUR AREA. The item “MINI BACKHOE, JANSENUSA MINI EXCAVATOR, TOWABLE, TRENCH DIGGER, NEW” is in sale since Thursday, October 05, 2017. This item is in the category “Business & Industrial\Heavy Equipment Attachments\Backhoe Attachments”. The seller is “bikefarmjoe” and is located in Descanso, California. This item can be shipped to United States.
ALL MACHINES HAVE THE 2 LEVER JOYSTICKS CONTROL VALVE and STEEL WIRE COVERED HYDRAULIC LINES. Video below shows the old 4 lever valve. We have 14” and 24 buckets and a thumb available. Every detail including the thick, box-beam steel frame, the reinforced hydraulic lines, the easy to use controls which have been upgraded to a two lever joystick controller system which makes the machine user friendly and easier to operate. No matter how tough your task, this back hoe. Is made to dig and built to last. We have all parts in stock as well. Here’s some customer reviews to read as well. This backhoe comes with a 10” trench bucket. Great Machine, Great Folks to deal with, Highly Recomended!!! Reat little machine got to run it & I love it—renagator. Product as described, great to work with, highly recomended, thank you. Great company to deal with Dont Hesitate! Operating radius of 130 degrees. Dump height 5-6 feet. 9HP GAS ENGINE runs the hydraulic pump. Strong hydraulic pump. 4 double action hydrolic cylinders. Max lifting weight 1,800 lbs. Ripping force 4,500 lbs. Digs 7 feet deep. Reach = up to 8 feet. Total lenght = ca. Width of the red frame = ca. Max heigth = 6′5ca. Weight crated = 1212lbs. Thank you for your interest. DELIVERIES TAKE IN MOST CASES 6 – 14 DAYS. DEPENDING ON YOUR AREA. The item “MINI BACKHOE, JANSENUSA MINI EXCAVATOR, TOWABLE, TRENCH DIGGER, NEW” is in sale since Friday, August 11, 2017. This item is in the category “Business & Industrial\Heavy Equipment Attachments\Backhoe Attachments”. The seller is “bikefarmjoe” and is located in Descanso, California. This item can be shipped to United States.
ALL MACHINES HAVE THE 2 LEVER JOY STICK CONTROL VALVES AND STEEL WIRE COVERED HYDRAULIC LINES. Every detail including the thick, box-beam steel frame, the reinforced hydraulic lines, the easy to use controls which have been upgraded to a two joystick controller system which makes the machine user friendly and easier to operate. No matter how tough your task, this back hoe. Is made to dig and built to last. For ripping or lifting, you could leave the tow vehicle attached to provide extra anchorage if needed. We have all parts in stock as well. Here’s some customer reviews to read as well. Great Machine, Great Folks to deal with, Highly Recomended!!! Reat little machine got to run it & I love it—renagator. Product as described, great to work with, highly recomended, thank you. Great company to deal with Dont Hesitate! Operating radius of 130 degrees. Dump height 7 – 8 feet. 9HP GAS ENGINE runs the hydraulic pump. Strong hydraulic pump. 4 double action hydrolic cylinders. Max lifting weight 1,800 lbs. Ripping force 4,500 lbs. Measurements: NO EXTRA CHARGE FOR LIFT GATE TRUCK WHEN WE DELIVER TO A RESIDENCE! Total lenght = ca. Width of the red frame = ca. Max heigth = 6′5ca. Weight crated = 1175lbs. Thank you for your interest. DELIVERIES TAKE IN MOST CASES 6 – 14 DAYS. DEPENDING ON YOUR AREA. The item “TOWABLE MINI BACKHOE WITH 10and14 TRENCH BUCKETS, JANSENUSA MINI EXCAVATOR” is in sale since Friday, August 11, 2017. This item is in the category “Business & Industrial\Heavy Equipment Attachments\Backhoe Attachments”. The seller is “bikefarmjoe” and is located in Compton, California. This item can be shipped to United States.
ALL MACHINES HAVE THE 2 LEVER JOYSTICKS CONTROL VALVE and STEEL WIRE COVERED HYDRAULIC LINES. Video below shows the old 4 lever valve. We have 14” and 24 buckets and a thumb available. Every detail including the thick, box-beam steel frame, the reinforced hydraulic lines, the easy to use controls which have been upgraded to a two lever joystick controller system which makes the machine user friendly and easier to operate. No matter how tough your task, this back hoe. Is made to dig and built to last. We have all parts in stock as well. Here’s some customer reviews to read as well. This backhoe comes with a 10” trench bucket. Great Machine, Great Folks to deal with, Highly Recomended!!! Reat little machine got to run it & I love it—renagator. Product as described, great to work with, highly recomended, thank you. Great company to deal with Dont Hesitate! Operating radius of 130 degrees. Dump height 5-6 feet. 9HP GAS ENGINE runs the hydraulic pump. Strong hydraulic pump. 4 double action hydrolic cylinders. Max lifting weight 1,800 lbs. Ripping force 4,500 lbs. Digs 7 feet deep. Reach = up to 8 feet. Total lenght = ca. Width of the red frame = ca. Max heigth = 6′5ca. Weight crated = 1212lbs. Thank you for your interest. JOE-619 887 2137 Sales. The item “MINI BACKHOE, MINI EXCAVATOR, TOWABLE, TRENCH DIGGER, NEW! , FREE SHIPPING” is in sale since Sunday, March 26, 2017. This item is in the category “Business & Industrial\Heavy Equipment Attachments\Backhoe Attachments”. The seller is “bikefarmjoe” and is located in Descanso, California. This item can be shipped to United States.
ALL MACHINES HAVE THE 2 LEVER JOYSTICKS CONTROL VALVE and STEEL WIRE COVERED HYDRAULIC LINES. Video below shows the old 4 lever valve. We have 14” and 24 buckets and a thumb available. We can send you a special offer if you would like to add attachments. Every detail including the thick, box-beam steel frame, the reinforced hydraulic lines, the easy to use controls which have been upgraded to a two lever joystick controller system which makes the machine user friendly and easier to operate. No matter how tough your task, this back hoe. Is made to dig and built to last. We have all parts in stock as well. Here’s some customer reviews to read as well. This backhoe comes with a 10” trench bucket. Great Machine, Great Folks to deal with, Highly Recomended!!! Reat little machine got to run it & I love it—renagator. Product as described, great to work with, highly recomended, thank you. Great company to deal with Dont Hesitate! Operating radius of 130 degrees. Dump height 5-6 feet. 9HP GAS ENGINE runs the hydraulic pump. Strong hydraulic pump. 4 double action hydrolic cylinders. Max lifting weight 1,800 lbs. Ripping force 4,500 lbs. Digs 7 feet deep. Reach = up to 8 feet. Total lenght = ca. Width of the red frame = ca. Max heigth = 6′5ca. Weight crated = 1212lbs. Thank you for your interest. JOE-619 887 2137 Sales. The item “MINI BACKHOE, MINI EXCAVATOR, TOWABLE, TRENCH DIGGER, NEW! , FREE SHIPPING” is in sale since Thursday, January 12, 2017. This item is in the category “Business & Industrial\Heavy Equipment Attachments\Backhoe Attachments”. The seller is “bikefarmjoe” and is located in Descanso, California. This item can be shipped to United States.
ALL MACHINES HAVE THE 2 LEVER JOYSTICKS CONTROL VALVE and STEEL WIRE COVERED HYDRAULIC LINES. Video below shows the old 4 lever valve. We have 14” and 24 buckets and a thumb available. We can send you a special offer if you would like to add attachments. Every detail including the thick, box-beam steel frame, the reinforced hydraulic lines, the easy to use controls which have been upgraded to a two lever joystick controller system which makes the machine user friendly and easier to operate. No matter how tough your task, this back hoe. Is made to dig and built to last. We have all parts in stock as well. Here’s some customer reviews to read as well. This backhoe comes with a 10” trench bucket. Great Machine, Great Folks to deal with, Highly Recomended!!! Reat little machine got to run it & I love it—renagator. Product as described, great to work with, highly recomended, thank you. Great company to deal with Dont Hesitate! Operating radius of 130 degrees. Dump height 5-6 feet. 9HP GAS ENGINE runs the hydraulic pump. Strong hydraulic pump. 4 double action hydrolic cylinders. Max lifting weight 1,800 lbs. Ripping force 4,500 lbs. Digs 7 feet deep. Reach = up to 8 feet. Total lenght = ca. Width of the red frame = ca. Max heigth = 6′5ca. Weight crated = 1212lbs. Thank you for your interest. JOE-619 887 2137 Sales. The item “MINI BACKHOE, MINI EXCAVATOR, TOWABLE, TRENCH DIGGER, NEW! , FREE SHIPPING” is in sale since Wednesday, September 07, 2016. This item is in the category “Business & Industrial\Heavy Equipment Attachments\Backhoe Attachments”. The seller is “bikefarmjoe” and is located in Descanso, California. This item can be shipped to United States.
More Options ...
Categories
Tag Cloud
Blog RSS
Comments RSS
Void « Default
Life 
Earth 
Wind 
Water 
Fire Light 
Previous Entries
Last 50 Posts
Back