Disclaimer
The opinions expressed herein are my own personal opinions and do not represent anyone else's view in any way, including those of my employer.
© Copyright 2023
The opinions expressed herein are my own personal opinions and do not represent anyone else's view in any way, including those of my employer.
© Copyright 2023
This Kubota BT2931A-G7148 backhoe bucket is perfect for your mini excavator. With a 12 tooth bucket and pin-on attachment, it is easy to install and use. Made in Japan, this high-quality bucket is designed to meet your excavation needs. The unit’s operating weight is under 3,000 lbs, making it easy to maneuver. The Kabota Back Hoe Bucket is a great addition to your heavy equipment collection. It has a maximum dig depth of 6′1” to 7′, suitable for various excavation tasks. This equipment type is perfect for those in the business and industrial sector.
If you are interested in bulk purchasing of specific part numbers, please let us know for get special quote. This is a high quality part made to OEM standards. We produce our stock according to international quality standart. This places you in an advantageous position as you are getting an OEM spec product at aftermarket prices. Why you pay 50% over for a branded box. We are producer and super stockist that has JCB speciality We sell our products world wide. If you don’t see the JCB product you are looking for, please message us and we will pull it up from our list and list it for you. Most times this is nominal and should not be a deterrent to you. Sorry, our items are NOT available for pick-up. No additional information at this time. You might also like. FOR JCB PART – 451/01707 – PINION SHAFT. 02-101436 Seal Crankshaft Rear Oil PERKINS.
Cat 374 frost tooth ripper Excavator New. 110 and 120 mm pin size. 20 inches between the mounting bracket ears. 25 inches center to center of the pins. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “budgetequipment” and is located in this country: US. This item can be shipped to United States.
4435 St Hwy 274. CAT 214B IFT OROPS WHEELED EXCAVATOR WITH 4X4, 46 TOOTH BUCKET, FRONT AUXILIARY, AND AIR IN TIRES! Options and Standard Features. Gross Power: 110 HP. Displacement: 402.8 Cu. Fuel Capacity: 75.9 Gal. Hydraulic System Fluid Capacity: 87.2 Gal. Hydraulic System Relief Valve Pressure: 4640 Psi. Hydraulic Pump Flow Capacity: 71.4 Gpm. Tire Size: Dual 10.00-20 12PR. Wheelbase: 8.54 Ft. Overall Width: 8.21 Ft. Ground Clearance: 1.12 Ft. Overall Width-Outriggers Down: 11.98 Ft. Height To Top Of Cab: 10.47 Ft. Upper Structure Clearance: 4.17 Ft. Cutting Height: 28.35 Ft. Loading Height: 19.59 Ft. Reach Along Ground: 29.63 Ft. Vertical Wall Dig Depth: 12.01 Ft. Digging Depth: 18.12 Ft. MACHINE VIDEO UPON REQUEST! Only 55 miles South East of Dallas. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in this country: US. This item can be shipped to United States.
4435 St Hwy 274. CAT 214B IFT OROPS WHEELED EXCAVATOR WITH 4X4, 46 TOOTH BUCKET, FRONT AUXILIARY, AND AIR IN TIRES! Options and Standard Features. Gross Power: 110 HP. Displacement: 402.8 Cu. Fuel Capacity: 75.9 Gal. Hydraulic System Fluid Capacity: 87.2 Gal. Hydraulic System Relief Valve Pressure: 4640 Psi. Hydraulic Pump Flow Capacity: 71.4 Gpm. Tire Size: Dual 10.00-20 12PR. Wheelbase: 8.54 Ft. Overall Width: 8.21 Ft. Ground Clearance: 1.12 Ft. Overall Width-Outriggers Down: 11.98 Ft. Height To Top Of Cab: 10.47 Ft. Upper Structure Clearance: 4.17 Ft. Cutting Height: 28.35 Ft. Loading Height: 19.59 Ft. Reach Along Ground: 29.63 Ft. Vertical Wall Dig Depth: 12.01 Ft. Digging Depth: 18.12 Ft. MACHINE VIDEO UPON REQUEST! Only 55 miles South East of Dallas. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in this country: US. This item can be shipped to United States.
2019 Bobcat Compact Excavator E50 Long Arm. E50 Long Arm, Millstone, NJ 08535. This 2019 Bobcat E50 Long Arm equipped with a. W/ a Hydraulic Clamp Is. Offered for sale and ready to work. Engine Type: 21.1 Gallon. Maximum Dig Depth: 12. Operating Weight: 10,677 lbs. Arm Digging Force: 6,744 lbs. Lift Capacity: 6,034 lbs. Boom Swing: Left – 75degres / Right- 50 degrees. Next service not due till 250 hours! Options and Standard Features. Trim: E50 Long Arm. Net Horsepower (HP): 354. Operating Weight: 4,001 – 5,000 Lbs. Dig Depth: 11′1” – 12. Again, we make every effort to present accurate and reliable information, use of this information is voluntary, and should only be deemed reliable after an independent review of its accuracy, completeness, and timeliness. Any and all differences must be addressed prior to time of sale. No expressed or implied warranties, including the availability or condition of the equipment listed is made unless otherwise stated in writing. EPA mileage estimates for comparison purposes only. Actual mileage may vary depending on driving conditions, driving habits, and vehicle maintenance. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. 2019 Bobcat E50 Long Arm, Millstone, NJ 08535 This 2019 Bobcat E50 Long Arm equipped with a 24 inch Tooth Loader Bucket w/ a Hydraulic Clamp Is offered for sale and ready to work. Boom Swing: Left – 75degres / Right- 50 degrees Additional Informatio. The item “2019 Bobcat Compact Excavator E50 Long Arm 24 Tooth Loader Bucket Hydraul Clamp” is in sale since Monday, March 22, 2021. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “fsbovehicles” and is located in Millstone Township, New Jersey. This item can’t be shipped, the buyer must pick up the item.
6195 LBS operating weight. 8.42 Feet dig depth. Rubber or steel track option. Same day approval, all credit types welcome. Financing for business buyers and also personal use buyers. Boom/Stick Option (Hex) 1. Max Reach Along Ground. Max Vertical Wall Digging Depth. Width To Outside Of Tracks. Length Of Track On Ground. Hydraulic System Relief Valve Pressure. Hydraulic Pump Flow Capacity. The item “2012 TAKEUCHI TB 228 MINI EXCAVATOR 2 SPEED 1251 HRS 24′ TOOTH BUCKET” is in sale since Thursday, February 25, 2021. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “abel1957pontiac” and is located in Homestead, Florida. This item can’t be shipped, the buyer must pick up the item.
Ripper Tooth (sometimes called a Ripper Hook or Ripper Claw) To Fit Bobcat E14 / E16 / E18 / E19 Mini Excavators. Pin Diameter = 30mm. Pin Centres = 123mm. Dipper Gap = 106mm. We often despatch faster, and if you have a specific timescale to meet please message us and we will do our best to meet your requirements. Rhinox is an industry leading supplier of Excavator, Telehandler and Skidsteer Loader Buckets, Attachments and Wearparts. Can’t see what you want? We supply Mini Digger / Excavator buckets, Pins & Bushes, plus many more! This item can be collected from our warehouse in East Yorkshire! The item “Ripper Tooth / Ripper Hook / Ripper Claw to fit Bobcat E14 / E16 / E18 / E19″ is in sale since Friday, February 1, 2019. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “rhinox-group-ltd” and is located in North Newbald. This item can be shipped worldwide.
1447 Hours, Open ROPS, 18 Tooth Bucket, Manual Coupler, 44 Stick, Auxiliary Hydraulic Plumbing, Control Pattern Changer, 12 Track Belts. Ward Equipment in Greensburg, IN has over 400 new and used skid steer attachments in stock right now! Located in Greensburg, Indiana. The item “USED IHI 25VX3 Mini-Excavator 2013 Open ROPS, 18 Tooth Bucket, 12 Track Belts” is in sale since Friday, July 10, 2020. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “wardequip” and is located in Greensburg, Indiana. This item can be shipped to United States.
Ripper Tooth (sometimes called a Ripper Hook or Ripper Claw) To Fit JCB 8008 / 8008CTS / Micro. Pin Diameter = 25mm. Pin Centres = 90mm. Dipper Gap = 95mm. We often despatch faster, and if you have a specific timescale to meet please message us and we will do our best to meet your requirements. Rhinox is an industry leading supplier of Excavator, Telehandler and Skidsteer Loader Buckets, Attachments and Wearparts. Can’t see what you want? We supply Mini Digger / Excavator buckets, Pins & Bushes, plus many more! This item can be collected from our warehouse in East Yorkshire! The item “Ripper Tooth / Ripper Hook / Ripper Claw to fit JCB 8008 / 8008CTS / Micro” is in sale since Wednesday, July 17, 2019. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “rhinox-group-ltd” and is located in North Newbald. This item can be shipped worldwide.
More Options ...
Categories
Tag Cloud
Blog RSS
Comments RSS
Void « Default
Life 
Earth 
Wind 
Water 
Fire Light 
Previous Entries
Last 50 Posts
Back