Excavators

Attachments Mini Excavator : Rock Bucket, Auger, Rakes, Digger Ripper. Buckets – used for digging, grading, and scooping materials. Augers – used for drilling holes for fence posts, trees, and utility poles. Rakes – used for clearing debris and preparing soil for landscaping or agriculture.

1PC NEW YN27C Rock Breaker Hammer/Gasoline Rock Drill. YN27C Gasoline Rock Drill. YN27C gasoline rock drill is a high efficient drill machine. It adapt to outside situations where there is no water, no electronic power and no air compressor. It can be used as a tool for breaking, percussive drilling, tamping splitting or ramming. Diameter of engine piston:58mm. Stroke of engine piston:70mm. Rotating speed of engine:2450R/min. Rotating speed of drilling rod:250R/min. Tank capacity:1.65L. YN27J jack hammer can be converted into a breaker or a hammer, for breaking, digging, splitting or ramming. It is suited to build of bridge, road, power station, geological explortation etc. YN27J rock drill is portble machine, it is also can use with supporting stand. YN27C hand-held internal-combustion rock drill is a hand-rockdrilling tool which integrates small gasoline engine, compressor and rock drill. It is easy to be carried along. It is stuited to work on high mountains, plains, hot and cold area with no power and no water supply and air compressing equipments, and especially suits the projects that the machine has to be carried at any time and in any area. Used to drill vertical downward hole(max depth 6m) and and. Thank you for your support. We stand behind every product we sell. However, we will try our best to minimize it. You can enjoy top-quality product and high-quality services from us, Trust me that you will have a pleasant shopping experience in here. Easy & Secure Payments.

RUNS AND OPERATES, VERY CLEAN CONDITION. DRILL IS NEWER THAN THE MACHINE. CHEAPEST BLAST HOLE DRILL WITH A CAB YOU’LL FIND ANYWHERE, OR TAKE IT OFF AND PUT A BUCKET BACK ON!

LOW HOUR 2019 22000 LB MINING SERIES LITTLE USED RIPPER FOR ROCK – SHALE – SANDSTONE WAS ON PC650 KOMATSU. PERFECT FOR GOLD MINERS FOR THE TOUGHEST PERMAFROST ON SLOPES AND HILLS WHERE YOU CRAWLERS WITH RIPPERS CANNOT ACCESS. Minimum noise levels. Minimum maintenance. No daily lubrication required. Minimum wear parts consumption. Long life components and materials. Less fuel consumption per produced m3/ton. Less emission per produced m3/ton. Environmental protection (Bio Lubricants). Marine/underwater operation. Can be used on standard excavators. Increase operator comfort. HARDOX® & Strenx construction ensures long-lasting durability in extreme conditions. Designed and manufactured in Spain by Xcentric International, only the best materials are used for excellent quality. Solid, durable and characterized by the now recognizable clean lines designed to resist wear and high stresses in the toughest working conditions. Extreme compactness and low center of gravity improves balance and drastically reduces the strain on the excavator arm, eliminating impact vibrations. Introducing the Xcentric Ripper® hydraulic ripper. A revolution in high volume excavation and demolition. After more than 10 years development in the design and manufacture of the worlds most productive, reliable, and technologically advanced hydraulic ripper, Xcentric International has taken the Xcentric Ripper range to a whole new level with the release of the all new Xcentric Ripper Mining Series. The Xcentric Ripper® outperforms traditional hydraulic hammers in nearly every type of material, particularly in medium hardness rock with natural fracturing and layers. Using patented Impact Vibration Accumulation Technology, the attachment works with the natural rigidity of the rock, and the vibrations that are produced shake the material to deepen cracks for easier breakup. It is an exceptional tool for frozen ground excavation, demolition, rock excavation, slag recycling, dredging, trenching, underground mining, and even underwater applications. XR mining series range. Easy operation with low noise. Unbelievable power and versatility. Easy on your machine’s pins and bushings. Field replaceable ripper teeth. Patented impact vibration accumulation technology. A safe, easy, and environmentally friendly alternative to drilling and blasting options. One of our customers in the pile and dredging industry was searching for an excavation tool that could be deployed for a three-month project which included the removal of more than 40,000 yards of basalt from a shoreline to make way for a new harbor and breakwater for incoming marine traffic. The superintendent saw video of the new Xcentric Ripper Mining Series working online and decided to give the new more powerful version of the hydraulic ripper a chance to prove it belonged in their arsenal of excavation tools. “We have the XR82 model working on one machine and a clam shell bucket for dredging on the other, ” he said. We needed a tool that would work well under water and the XR82 has performed to our expectations so far. I see it proving valuable as an asset in our equipment fleet and working really well on some of our more specialty projects. Mining Series Design Improvements While the working technology is based on the standard series, the new Mining Series has been reinforced with a remodeled working platform, which delivers a much higher energy impact force to the work tool with a lower frequency. Larger and heavier eccentric gears are now machined from a single billet of steel and precisely designed to allow for equal weight distribution side-to-side and direct impact energy vertically. The lower pivot arm and housing is reinforced to limit wear where the ripper typically encounters material, and the ripper arm or beak has been remodeled and reinforced with Hardox® steel. The XR Mining Series also has a narrower body profile, making it ideal for tunneling or operating in confined areas. Designed to increase production, at lower operating costs and reduced noise levels, the all new XR Mining Series is a revolution for high volume rock excavation. Like the regular series that came before it, the Mining Series will be an invaluable tool for frozen ground excavation, rock excavation, quarrying, surface and underground mining, oil sands excavation, utility project installations, pipeline trenching, demolition, slag recycling, dredging, and even underwater applications. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “easyadfrank” and is located in this country: US. This item can be shipped to United States.

• Modification Description: CUSTOM PIN GRABBER TOP PLATE FOR 600-750 CLASS PIN GRABBER COUPLER
• Hours: 200
• Bundle Description: XCENTRCI 600-1200 CLASS EXCAVATOR RIPPEWR C/W 600-750 CLASS PINGRABBER TOP PLATE
• Max Dig Depth: Over 26′
• Custom Bundle: Yes
• MPN: HR82
• Equipment Type: Hydraulic Excavator
• Modified Item: Yes
• Serial Number: 18062501
• Model Year: 2019
• Net Horsepower (HP): 191 – 200
• Model: EXCENTRIC HR82 RIPPER
• Country/Region of Manufacture: Italy
• Operating Weight: 22,001 – 23,000 lbs

Old Forge Power Equipment, Inc. Engine & Equipment Division. Traxxon TR-EX-2000 drill mounted on a 2006 CAT 325CL excavator chassis. Drill is in good working order, operates as it should. See pictures for more details. No leaks noted on drifter or from any major components. Air compressor works as it should. Dust collector operates, could use some new hoses, see pictures. CAT 325CL chassis is in excellent original condition, very clean. Has auxiliary hydraulics and OEM Cat manual quick coupler — fairly easy to change out the drill for a bucket. MULTI FUNCTION UNIT HERE. RUNS PERFECT — COME CHECK IT OUT! 50+ PICTURES AVAILABLE SHOWING CONDITION OF ALL COMPONENTS INCLUDING U/C, DRILL, DRIFTER, INTERIOR, COMPRESSOR, ETC. We will load any trailer. No storage will be charged for a period of up to 30 days. After 90 days property is considered abandoned and resold. Otherwise, no exceptions to this policy. Must be paid for within 5 days of sale. LOOKING FOR TRACTOR & EQUIPMENT PARTS?? OLD FORGE POWER EQUIPMENT PARTS & COMPONENTS. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “oldforgepower” and is located in this country: US. This item can be shipped to United States.

• Model: TR-EX- 2000
• Equipment Type: Hydraulic Excavator
• Make: CAT
• Hours: 12000
• Model Year: 2006

Old Forge Power Equipment, Inc. Engine & Equipment Division. 892E LC, long undercarriage, EROPS w/ front cab guard, rock grapple, John Deere diesel engine. MACHINE RUNS AND OPERATES WELL, WE CAN’T READ HOUR METER. WE HAVE USED THIS MACHINE FOR LIGHT DUTY ONLY FOR AROUND 3 YEARS, WE JUST DON’T NEED IT AT THE YARD!! GOOD SOLID 892, ALL MECHANICAL, GREAT QUARRY MACHINE HERE! We will load any trailer. No storage will be charged for a period of up to 30 days. After 90 days property is considered abandoned and resold. Otherwise, no exceptions to this policy. Must be paid for within 5 days of sale. LOOKING FOR TRACTOR & EQUIPMENT PARTS?? OLD FORGE POWER EQUIPMENT PARTS & COMPONENTS. The item “John Deere 892E LC Hydraulic Excavator RUNS MINT! Rock Grapple 892 Long Track” is in sale since Sunday, June 21, 2020. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “oldforgepower” and is located in Carbondale, Pennsylvania. This item can be shipped to United States.

• Equipment Type: Hydraulic Excavator
• Make: John Deere
• Model: 892E LC