Excavators

RUNS AND OPERATES, VERY CLEAN CONDITION. DRILL IS NEWER THAN THE MACHINE. CHEAPEST BLAST HOLE DRILL WITH A CAB YOU’LL FIND ANYWHERE, OR TAKE IT OFF AND PUT A BUCKET BACK ON!

Old Forge Power Equipment, Inc. Engine & Equipment Division. KOMATSU PC150-3 hydraulic excavator, JOHN HENRY blast hole drill, EROPS, heater, onboard LeRoi 375 CFM air compressor p/b Cummins 4BT 3.9 engine, machine powered by Komatsu S6D95 turbo diesel engine, fully mechanical fuel injection, 5100 hours, legal transport width, hydraulic drifter, in-cab controls for drill. NICE RUNNING UNIT HERE — WORKS AS IT SHOULD, LOOKS TO BE WELL MAINTAINED, CLEAN OVERALL CONDITON, DRILL IS FULLY FUNCTIONAL. COMES W/ 2 PIECES OF DRILL STEEL AND VARIOUS BITS AS PICTURED. FULL PICTURE SET AVAILABLE SHOWING ALL DETAILS. We will load any trailer. No storage will be charged for a period of up to 30 days. After 90 days property is considered abandoned and resold. Otherwise, no exceptions to this policy. All items must be paid within 5 days of sale. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “oldforgepower” and is located in this country: US. This item can be shipped to United States.

• Hours: 5160
• Model: PC150-3
• Make: Komatsu
• Equipment Type: Hydraulic Excavator
• Serial Number: 04408

Old Forge Power Equipment, Inc. Engine & Equipment Division. KOMATSU PC150-3 hydraulic excavator, JOHN HENRY blast hole drill, EROPS, heater, onboard LeRoi 375 CFM air compressor p/b Cummins 4BT 3.9 engine, machine powered by Komatsu S6D95 turbo diesel engine, fully mechanical fuel injection, 5100 hours, legal transport width, hydraulic drifter, in-cab controls for drill. NICE RUNNING UNIT HERE — WORKS AS IT SHOULD, LOOKS TO BE WELL MAINTAINED, CLEAN OVERALL CONDITON, DRILL IS FULLY FUNCTIONAL. COMES W/ 2 PIECES OF DRILL STEEL AND VARIOUS BITS AS PICTURED. FULL PICTURE SET AVAILABLE SHOWING ALL DETAILS. We will load any trailer. No storage will be charged for a period of up to 30 days. After 90 days property is considered abandoned and resold. Otherwise, no exceptions to this policy. All items must be paid within 5 days of sale. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “oldforgepower” and is located in this country: US. This item can be shipped to United States.

• Hours: 5160
• Model: PC150-3
• Make: Komatsu
• Equipment Type: Hydraulic Excavator
• Serial Number: 04408

1500W Electric Post Hole Digger with 6 inch Digging Auger Drill Bit Outdoor. Powerful Motor – 1500W 2 HP electric post hole digger with 6 auger bit features powerful motor for delivering max. Torque of 74 ft-lb at a speed of 210RPM for fast digging holes on lawn and muddy ground, perfect for fence posts, decks, green house, tree planting, seedlings, landscaping and other home and industrial lawn applications. 6″ Auger Bit – 6″ x 31 1/2″ Metal auger bit fits for common handheld post-hole diggers with 3/4″ shaft; subulate tip & spiral blade for penetrating the ground quickly, increasing planting speed; leave dirt around the edge of dug hole for easy cleaning; this post hole digger is applied to difference sizes of auger bits. Safety Lock – Equipped with a safety lock button for preventing any accidental triggering when not in use; only when you press safety lock and start button, the digger will start working, ideal for ensuring working safety. Long Lasting Design – High strength aluminum alloy engine body for rust and corrosion resistance, durable copper motor for frequent digging projects; cool vents for providing good heat dissipation while working; extra 2 carbon brushes for replacement and extending the service life of motor. Anti-vibration & Anti-skid Handle – Ergonomic long handle with anti-skid grip surface for anti-vibration and providing stability and comfortability while working, ideal for improving drilling accuracy. Overall Dimension(LxWxH): 23 5/8″ x 15 3/8″ x 43 5/16 (60 x 39 x 110 cm). Motor Dimension(LxWxH): 23 5/8″ x 15 3/8″ x 12 5/8 (60 x 39 x 32 cm). Auger Bit DimensionDia. XL: 5 7/8″ x 31 1/2″ (15 x 80 cm). Auger Shaft SizeDia. XL: 3/4″ x 1 9/16″ (1.95 x 4 cm). Drilling Hole Diameter of Shaft: 13/16 (2 cm). Power Cord Length: 15 3/4 (40 cm). Handle Length: 6 1/2 (16.5 cm). Main Body Material: Aluminum Alloy, Nylon Plastic. Rated Power: 1500W. Current: 10.5A. Horsepower: 2.0HP. Torque: 74 ft-lb (100 Nm). No-load Speed: 210r/min. Net Weight: 23 Lbs (10.45 kg). 1x Electric Post Hole Digger. 1x Auger Bit. 2x Carbon Brushes. 1x Hex Spanner. 1x User Manual. Your satisfaction is our priority! We ONLY send this item to USA temporarily. For example, if the item. Doesn’t match listing description. Damaged or defective when received. Counterfeit or imitation goods. Chose the wrong size or feel that the product is not suitable for buyers himself. No need this product after received. Find a more suitable price elsewhere than choose a return. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “yuejo2019″ and is located in this country: US. This item can be shipped to United States.

• Max. Torque: 74 ft-lb (100 Nm)
• Overall Dimension: 23 5/8\
• type: lectric Post Hole Digger

Old Forge Power Equipment, Inc. Engine & Equipment Division. Traxxon TR-EX-2000 drill mounted on a 2006 CAT 325CL excavator chassis. Drill is in good working order, operates as it should. See pictures for more details. No leaks noted on drifter or from any major components. Air compressor works as it should. Dust collector operates, could use some new hoses, see pictures. CAT 325CL chassis is in excellent original condition, very clean. Has auxiliary hydraulics and OEM Cat manual quick coupler — fairly easy to change out the drill for a bucket. MULTI FUNCTION UNIT HERE. RUNS PERFECT — COME CHECK IT OUT! 50+ PICTURES AVAILABLE SHOWING CONDITION OF ALL COMPONENTS INCLUDING U/C, DRILL, DRIFTER, INTERIOR, COMPRESSOR, ETC. We will load any trailer. No storage will be charged for a period of up to 30 days. After 90 days property is considered abandoned and resold. Otherwise, no exceptions to this policy. Must be paid for within 5 days of sale. LOOKING FOR TRACTOR & EQUIPMENT PARTS?? OLD FORGE POWER EQUIPMENT PARTS & COMPONENTS. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “oldforgepower” and is located in this country: US. This item can be shipped to United States.

• Model: TR-EX- 2000
• Equipment Type: Hydraulic Excavator
• Make: CAT
• Hours: 12000
• Model Year: 2006

Pin siz e 25mm Between centres 90mm Dipper gap 90mm. Auger Width 200mm x Length 700mm universal fitting for mini diggers, many customers have adapted the mounting bracket so the auger can be fitted to larger diggers, this Auger has a standard mini digger mounting and therefore will fit, JCB 8014, Kubota, XN08 and many other machines. This item consists of Motor, Mounting Bracket, Drill Bit (normal soils not rock) and hydraulic pipes. X2 Hydraulic pipes 96cm. Turning Torque 305 Nm Flow Rate 18L Pressure 18Mpa. The item “Auger, New Mini Digger Post Hole Auger £650 including VAT” is in sale since Wednesday, November 24, 2021. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “denniwar-5″ and is located in Tarporley. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, French guiana, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Saudi arabia, South africa, United arab emirates, Ukraine, Chile, Bahamas, Colombia, Costa rica, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, Trinidad and tobago, Uruguay, Viet nam.

• Item: Parts & Accessories
• Power Source: Hydraulic
• Year Manufactured: 2019
• Equipment Type: Mini Excavator
• Make: Unbranded

ENGINE RUNS BUT HAS A HOLE IN BLOCK – ROD THROWN AND PUNCTURED THROUGH BLOCK PLEASE READ BELOW & WATCH VIDEO! 1998 Bobcat 325 Mini Excavator, OROPS (Canopy), Kubota 3-Cylinder 27 Horsepower Diesel Engine, Hydrostatic Forward/Reverse, Rubber Pads/Tracks, Digging Bucket, Boom Auxiliary Hydraulic Connections, Backfill/Leveling/Push Blade, 6,000#+ Operating Weight Machine, SN: 514015493, 4,485 Actual Hours. Located in Mississippi, this unit belonged to a small City since new in 1998, was used by the City for years around the City doing general work, about a year ago the unit slung a rod in the engine and the City decided to replace it with a new one because of age, it has been sitting idle not being used for the last year. The City public works Director explained all functions of the machine were working properly when the engine slung a rod and that it was serviced over the years properly. Please understand that we promise and guarantee that it has a hole, large hole almost the size of a baseball in the back side of the engine block about ¾ of the way down the engine, in between a golf ball and baseball size (please look at photos in photo link of hole these were taken by removing the seat/seat frame hole is on inside/front side of engine), believe it or not the engine will crank right up and run, actually doesnt run bad at all, has a little miss but if it was not pouring oil out of the hole you would not realize or think it had a slung rod, the battery will not hold a charge and needs to be replaced, we did not replace the battery because we did not want anyone at the shop/warehouse cranking it and running all the oil out, we filled the engine with oil and jumped it off to get the video, did not run long enough to lose all the oil and only ran to show that it does run, hydraulics work and will pull forward and backwards, you cannot use like this or you cannot use for long like this, oil dumps out block almost as fast as you can or could pour it in, the hydraulics seem to be strong, unit will pull forward and reverse and in both directions, the boom pins/bushings do have some slack and we noticed a cylinder leaking on the boom just needs to be repacked, it does have auxiliary hydraulic connections, the boom has a spot where it has been patched/repaired/welded at one time by the City, the bucket is missing a tooth, undercarriage/sprockets/pads all look fine, the turntable has no slack and seems to be in good shape, the unit is missing a panel on the left side that can be seen in the photos as not being on the machine we do not have it and the City could not locate it, the operators seat is ripped/torn and needs to be replaced, other than that what you see is what you get! Please remember this unit is over 15 years old, will need a new block or a new engine or use the machine for parts, if you really want to fix up then you will also need a battery, a new seat, a panel for the side that is missing and a good servicing! The machine was just washed before photos/video were taken so some of the wet spots around and below the machine may be from being washed, the oil is from the hole in the block and we found one cylinder on the boom leaking. We can load on or in any type transport, have a crane that will pick it straight up or can load off dock! The photos and video were taken the day before the listing on November 21, 2015, and show the excavator in its current condition! WE WILL LOAD THE UNIT, JUST LINE UP A TRUCK AND GIVE US ADVANCE NOTICE AND WE WILL LOAD FOR FREE, WE DO PREFER ALL ARRIVAL PLANS TO BE MADE AND DISCUSSED AT LEAST 24 HOURS IN ADVANCE. UNIT CAN BE STORED FOR 30 DAYS OR LONGER IF NEED BE! BOBCAT 325 MINI EXCAVATOR LOCATION. The item “1998 Bobcat 325 Mini Excavator in Mississippi NO RESERVE hole in engine block” is in sale since Monday, November 23, 2015. This item is in the category “Business & Industrial\Heavy Equipment\Excavators”. The seller is “fairco777″ and is located in Lumberton, Mississippi. This item can’t be shipped, the buyer must pick up the item.

• Excavator Type: Small
• Make: Bobcat
• Model Year: 1998
• Hours: 4485
• Model: 325
• MPN: 325
• Serial Number: 514015493
• Operating Weight: 6,001 – 7,000 lbs
• Max Dig Depth: 8′1” – 9′
• Net Horsepower (HP): 21 – 30