Excavators

2014 BOBCAT E35 EXCAVATOR 35HP 2181 HRS IN EXCELLENT WORKING CONDITION WITH NO PROBLEMS, NO ISSUES WHATSOEVER, NO CODES, EVERYTHING WORKS RIGHT AND AS IT SHOULD, LOTS OF MAINTENANCE DONE, NO LEAKS, SUPER CLEAN! THIS UNIT HAS THE 35HP KUBOTA ENGINE. Lots of maintenance done, including new RPM sensor, all fluids, filters, cylinders, new seat, fully synthetic engine oil and filter, and more. Machine has been fully cleaned!! This is a very sought after model as its PRE FULL tier 4 emissions requirements, so you get a machine that puts out more power and is not limited by emissions standards or requires DPF fluid!!!! It is tier 4 compliant, this was one of only 3 years of that loop hole!!! Options Include: Radio Clamp Auxiliary 2 Speed (actually variable) LED lights including three buckets, 24″ digging (5 teeth), 12″ digging/trenching (3 tooth), and 36 grading – basically all you will need! The item “2014 BOBCAT E35 EXCAVATOR 35HP ZTS ZERO TURN SWING CLAMP LIGHTS RADIO” is in sale since Monday, June 28, 2021. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “jorge358″ and is located in Opa-Locka, Florida. This item can be shipped to United States.

• Model Year: 2014
• Net Horsepower (HP): 35
• Operating Weight: 7,001 – 8,000 lbs
• Equipment Type: Mini Excavator
• Make: Bobcat
• Hours: 2181

2019 Bobcat Compact Excavator E50 Long Arm. E50 Long Arm, Millstone, NJ 08535. This 2019 Bobcat E50 Long Arm equipped with a. W/ a Hydraulic Clamp Is. Offered for sale and ready to work. Engine Type: 21.1 Gallon. Maximum Dig Depth: 12. Operating Weight: 10,677 lbs. Arm Digging Force: 6,744 lbs. Lift Capacity: 6,034 lbs. Boom Swing: Left – 75degres / Right- 50 degrees. Next service not due till 250 hours! Options and Standard Features. Trim: E50 Long Arm. Net Horsepower (HP): 354. Operating Weight: 4,001 – 5,000 Lbs. Dig Depth: 11′1” – 12. Again, we make every effort to present accurate and reliable information, use of this information is voluntary, and should only be deemed reliable after an independent review of its accuracy, completeness, and timeliness. Any and all differences must be addressed prior to time of sale. No expressed or implied warranties, including the availability or condition of the equipment listed is made unless otherwise stated in writing. EPA mileage estimates for comparison purposes only. Actual mileage may vary depending on driving conditions, driving habits, and vehicle maintenance. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. 2019 Bobcat E50 Long Arm, Millstone, NJ 08535 This 2019 Bobcat E50 Long Arm equipped with a 24 inch Tooth Loader Bucket w/ a Hydraulic Clamp Is offered for sale and ready to work. Boom Swing: Left – 75degres / Right- 50 degrees Additional Informatio. The item “2019 Bobcat Compact Excavator E50 Long Arm 24 Tooth Loader Bucket Hydraul Clamp” is in sale since Monday, March 22, 2021. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “fsbovehicles” and is located in Millstone Township, New Jersey. This item can’t be shipped, the buyer must pick up the item.

• Brand: Bobcat
• Dig Depth: 11′1” – 12′
• Excavator Type: Compact
• For Sale By: Private Seller
• Fuel Type: Diesel
• Hours: 120
• Make: Bobcat
• Mileage: 0
• Model: Compact Excavator
• Net Horsepower (HP): 354
• Operating Weight: 4,001 – 5,000 lbs
• Year: 2019

USED BUT IN EXCELLENT WORKING CONDITION WITH NO PROBLEMS, NO ISSUES WHATSOEVER, NO CODES, EVERYTHING WORKS RIGHT AND AS IT SHOULD, LOTS OF MAINTENANCE DONE, NO LEAKS, SUPER CLEAN! THIS UNIT HAS THE 35HP KUBOTA ENGINE. Lots of maintenance done, including new RPM sensor, all fluids, filters, cylinders, new seat, fully synthetic engine oil and filter, and more. Machine has been fully cleaned. This is a very sought after model as its PRE FULL tier 4 emissions requirements, so you get a machine that puts out more power and is not limited by emissions standards or requires DPF fluid!!!! It is tier 4 compliant, this was one of only 3 years of that loop hole!! 2 Speed (actually variable). Illinois Bill of sale included. The item “2014 35HP E35 BOBCAT EXCAVATOR ZTS ZERO TURN SWING CLAMP LIGHTS RADIO & MORE” is in sale since Tuesday, October 22, 2019. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “aeinc1″ and is located in Wood Dale, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Max Dig Depth: 10′1” – 11′
• Model: E35
• Net Horsepower (HP): 35
• Operating Weight: 7,001 – 8,000 lbs
• Equipment Type: Mini Excavator
• Make: Bobcat
• Hours: 2148
• Model Year: 2014
• Serial Number: A93K18887

This is another example of the best value equipment being offered by Matt at Marshall Machinery Inc. Used equipment sales are. Call Matt to set up a time to test drive or for trucking quote. Has been serving the northeast for over 50 years. When you call, ask for Matt. We are registered to collect. FINANCING IS AVAILABLE TO QUALIFIED BUYERS! The item “BOBCAT E32 MINI EXCAVATOR CAB HEAT AIR RUBBER TRACK HYDRAULIC THUMB CLAMP” is in sale since Tuesday, January 12, 2016. This item is in the category “Business & Industrial\Heavy Equipment\Excavators”. The seller is “marshallmachinery” and is located in Honesdale, Pennsylvania. This item can be shipped to United States.

• Excavator Type: Compact
• Make: Bobcat
• Hours: 485
• Model: E32
• Operating Weight: 7,001 – 8,000 lbs
• Max Dig Depth: 11′1” – 12′
• Net Horsepower (HP): 31 – 40

This is another example of the best value equipment being offered by Matt at Marshall Machinery Inc. Used equipment sales are. Call Matt to set up a time to test drive or for trucking quote. Has been serving the northeast for over 50 years. When you call, ask for Matt. We are registered to collect. FINANCING IS AVAILABLE TO QUALIFIED BUYERS! The item “BOBCAT E35 MINI EXCAVATOR CAB HEAT AIR RUBBER TRACK HYDRAULIC CLAMP THUMB” is in sale since Tuesday, January 12, 2016. This item is in the category “Business & Industrial\Heavy Equipment\Excavators”. The seller is “marshallmachinery” and is located in Honesdale, Pennsylvania. This item can be shipped to United States.

• Excavator Type: Compact
• Make: Bobcat
• Hours: 430
• Model: E35
• Operating Weight: 7,001 – 8,000 lbs
• Max Dig Depth: 11′1” – 12′
• Net Horsepower (HP): 31 – 40

2012 BOBCAT E50 MINI LONG ARM MOTION ALARM HYDRAULIC COUPLER 24 TRENCH BUCKET FLOATING DOZER BLADE HYDRAULIC THUMB ONLY 343 HRS!! This is another example of the best value equipment being offered by Matt at Marshall Machinery Inc. Used equipment sales are. Call Matt to set up a time to test drive or for trucking quote. Has been serving the northeast for over 50 years. When you call, ask for Matt. We are registered to collect. FINANCING IS AVAILABLE TO QUALIFIED BUYERS! The item “2012 BOBCAT MINI EXCAVATOR HYDRAULIC THUMB CLAMP CAB HEAT AIR RUBBER TRACKS” is in sale since Monday, July 20, 2015. This item is in the category “Business & Industrial\Heavy Equipment\Excavators”. The seller is “marshallmachinery” and is located in Honesdale, Pennsylvania. This item can be shipped to United States.

• Excavator Type: Compact
• Make: Bobcat
• Model Year: 2012
• Hours: 343
• Model: E50
• Operating Weight: 11,001 – 12,000 lbs
• Max Dig Depth: 11′1” – 12′
• Net Horsepower (HP): 41 – 50

Largest Bobcat Dealer In The Southeast With 2 Locations. Your One Stop Shop For Sales (New & Used), Service, Parts, and Rental. Ask about our GPS Tracking Systems. At these prices you can’t afford not to! ___ 2014 Bobcat E85 Excavator _______. 2014 E85 Excavator with only 250 hours. Includes Bobcat Hydraulic Thumb. Cab unit with heat & a/c, digital display. Current rental unit, hours are subject to change. Please see pictures for condition of unit. Instrument panel does show wear. This is a like-new machine ready to be put to work!! Unless expressly stated, Bobcat of Atlanta makes no representations or warranties, express or implied, concerning equipment or its components. Let us know if you have any other questions about this machine! 59.4 HP, 44.3 kW. 18960 lbs, 8600 kg. Travel Speed – High. 2.9 mph, 4.7 kmh. Travel Speed – Low. 1.7, 1.7. 8069 lbf, 35892 N. 14509 lbf, 64538 KN. 9327 lbs, 4231 kg. 118.1 in, 3000 mm. Boom Swing – Left. Boom Swing – Right. 15.5 ft, 4725 mm. 16.5 ft, 4995 mm. Maximum Reach at Ground Level. 23.9 ft, 7295 mm. Maximum Depth of Vertical Wall. 147.6 in, 3755 mm. 5.5 psi, 38.3 kPa. 29.1 gal, 110 L. 22.9 gal, 87 L. Number of Hydraulic Pumps. Variable displacment piston, with gear. 45.9 GPM, 174 L/min. 25.1 GPM, 95 L/min. 3045 psi, 210 BAR. Overall Length in Travel Position. 158.4 in, 4005 mm. 91 in, 2300 mm. 104 in, 2640 mm. Length of track on ground. 87 in, 2200 mm. 5.8 in, 147 mm. The item “2014 Bobcat E85 Excavator with Hydraulic Clamp WARRANTY INCLUDED” is in sale since Thursday, March 19, 2015. This item is in the category “Business & Industrial\Heavy Equipment\Excavators”. The seller is “bobcatofatlanta” and is located in Atlanta, Georgia. This item can be shipped to United States.

• Excavator Type: Compact
• Make: Bobcat
• Model Year: 2014
• Hours: 250
• Model: E85
• Operating Weight: 18,001 – 19,000 lbs
• Max Dig Depth: 15′1” – 16′
• Net Horsepower (HP): 51 – 60

This is a brand new jcb 3cx hydra clamp seal. These will fit onto jcb 3cx machines upto serial no. The price is gbp 5.90 each. We accept the following. Oem part numbers, descriptions are used for reference purposes only. Any product found to be damaged should be notified to us immediately and must be returned to us within 2 days of receipt.The item “JCB PARTS 3CX HYDRA CLAMP SEAL” is in sale since Monday, January 28, 2013. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “abelpartsuk” and is located in Hounslow, Middlesex. This item can be shipped worldwide.

• MPN: 904/09400
• Item: Parts & Accessories

This is a brand new jcb 3cx hydra clamp seal. These will fit onto jcb 3cx machines from serial no. The price is gbp 9.90 each. We accept the following. Oem part numbers, descriptions are used for reference purposes only. Any product found to be damaged should be notified to us immediately and must be returned to us within 2 days of receipt.The item “JCB PARTS 3CX HYDRA CLAMP SEAL” is in sale since Monday, January 28, 2013. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “abelpartsuk” and is located in Hounslow, Middlesex. This item can be shipped worldwide.

• Make: JCB
• MPN: 904/20336
• Item: Parts & Accessories