Disclaimer
The opinions expressed herein are my own personal opinions and do not represent anyone else's view in any way, including those of my employer.
© Copyright 2021
The opinions expressed herein are my own personal opinions and do not represent anyone else's view in any way, including those of my employer.
© Copyright 2021
2005 Caterpillar 303 CR Hydraulic Mini Excavator w/ Thumb Hydraulic Tilt Bucket. Boom swing cylinder, no leaks. The thumb grabber not shown in pictures is included. The item “2005 Caterpillar 303 CR Hydraulic Mini Excavator with Thumb Hydraulic Tilt Bucket” is in sale since Friday, September 18, 2020. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “thegrandelectric” and is located in Aurora, Illinois. This item can’t be shipped, the buyer must pick up the item.
Welcome to Kurtz Trading LLC! 05 Caterpillar 303 CR. Options and Standard Features. Thank you for your interest in our equipment. Kurtz Trading strives to offer quality used equipment at reasonable prices. We thoroughly inspect all of our equipment to ensure all functions operate as they should, all fluids are at the proper levels, and that there are no major mechanical issues. We operate the equipment for 20-30 minutes to ensure the equipment operates properly under a load. Used equipment conditions vary, so we strongly advise communicating directly with you about the item you are interested in. This allows us the opportunity to describe the equipment in detail, answer any questions you have, and ensure you are getting what you expect. We provide pictures and a video for each item, but will be happy to provide any additional photos you may need. Equipment That is Coming In Soon! Once the item arrives and has been inspected by our shop we will post pictures and a video. We will be able to answer most questions about the item, but cannot guaranty details until we have received and inspected the item. All of our attachments are tested to ensure their functionality and overall condition. We encourage you to call and confirm the attachments compatibility to your specific equipment. We provide pictures and, if applicable, a video for each attachment, but will be happy to provide any additional photos you may need. Beginning January 1st, 2020. Due to the South Dakota v. IL, IN, KY, MA, MD, MI, NC. NJ, OH, PA, SC, VA, WV. 8-5 Monday thru Friday! The item “2005 Caterpillar 303 CR Hydraulic Mini Excavator with Thumb Hydraulic Tilt Bucket” is in sale since Wednesday, July 15, 2020. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “kurtztrading” and is located in Littlestown, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.
Welcome to Kurtz Trading LLC! Options and Standard Features. Thank you for your interest in our equipment. Kurtz Trading strives to offer quality used equipment at reasonable prices. We thoroughly inspect all of our equipment to ensure all functions operate as they should, all fluids are at the proper levels, and that there are no major mechanical issues. We operate the equipment for 20-30 minutes to ensure the equipment operates properly under a load. Used equipment conditions vary, so we strongly advise communicating directly with you about the item you are interested in. This allows us the opportunity to describe the equipment in detail, answer any questions you have, and ensure you are getting what you expect. We provide pictures and a video for each item, but will be happy to provide any additional photos you may need. Equipment That is Coming In Soon! Once the item arrives and has been inspected by our shop we will post pictures and a video. We will be able to answer most questions about the item, but cannot guaranty details until we have received and inspected the item. All of our attachments are tested to ensure their functionality and overall condition. We encourage you to call and confirm the attachments compatibility to your specific equipment. We provide pictures and, if applicable, a video for each attachment, but will be happy to provide any additional photos you may need. Beginning January 1st, 2020. Due to the South Dakota v. IL, IN, KY, MA, MD, MI, NC. NJ, OH, PA, SC, VA, WV. 8-5 Monday thru Friday! The item “2004 Gehl 373 Hydraulic Mini Excavator with Cab & Carriage Slope Tilt” is in sale since Thursday, June 25, 2020. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “kurtztrading” and is located in Littlestown, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.
7,851 POUND OPERATING WEIGHT. 31 HP DIRECT INJECTION DIESEL. DIAL CONTROLLED VARIABLE THROTTLE. FULLY AUTOMATED SIMPLE PILOT CONTROLS. ONLY 1,863 ORIGINAL HOURS. EXPENSIVE HYDRAULIC TILT BACKFILL BLADE. NEW 14 SEVERE DUTY TOOTH BUCKET. GENTLEMAN, THIS IS A WORK READY UNIT! The item “2008 CAT 303CR MINI EXCAVATOR 8,000 LBS HYDRAULIC ANGLE TILT BLADE OPTION” is in sale since Saturday, February 22, 2020. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “dirttoys-ft.lauderdale” and is located in Fort Lauderdale, Florida. This item can be shipped to United States.
7,851 POUND OPERATING WEIGHT. 31 HP DIRECT INJECTION DIESEL. DIAL CONTROLLED VARIABLE THROTTLE. FULLY AUTOMATED SIMPLE PILOT CONTROLS. ONLY 1,263 ORIGINAL HOURS. EXPENSIVE HYDRAULIC TILT BACKFILL BLADE. NEW 14 SEVERE DUTY TOOTH BUCKET. GENTLEMAN, THIS IS A WORK READY UNIT! The item “2008 CAT 303CR MINI EXCAVATOR 8,000 LBS HYDRAULIC ANGLE TILT BLADE OPTION” is in sale since Tuesday, February 11, 2020. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “dirttoys-ft.lauderdale” and is located in Fort Lauderdale, Florida. This item can be shipped to United States.
Mustang ME3602 Mini Excavator. Runs and operates good. Has some slop in swivel. Stick cylinder has slow leak. Comes with seal kit. Cab with heat only. One new sprocket and two new rollers. Comes with two buckets. 31hp Yanmar engine. 9 10 max dig depth. 8,000lb operating weight. The item “Mustang ME3602 Mini Excavator With Tilt And Two Buckets” is in sale since Wednesday, May 22, 2019. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “purnellsequipment” and is located in Shelbyville, Kentucky. This item can’t be shipped, the buyer must pick up the item.
2012 Kubota kx71-3 low hours super clean doesn’t leak or burn anything. Stored in temp controlled shop. 22′ tilt trailer with 12k winch mounted to it. I have over 35k in the trailer and excavator with receipts. Perfect for drainage and plumbing. The item “Kubota kx71-3 Mini Excavator AND 22 ft Tilt trailer low hours serviced” is in sale since Thursday, February 28, 2019. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “stay-on-guard” and is located in Bethel, Ohio. This item can’t be shipped, the buyer must pick up the item.
Hydro Tilt Swing Attachment. MAX Dig Depth 10.2 Feet. All of our Items are advertised for Local Sale Here on the Dealerships Lot! If you Find you have been Scammed or you Find Someone is in the act of trying to SCAM you call…. FTC (Federal Trades Commission) toll free hotline. The only thing I had to do to make it road ready was to put new tires on it. Thanks again for all your help getting the trailer down here to me. Definitely a satisfied customer. Was searching for a used John Deere tractor for sale. Lucky was the only person who had actually taken a video of his tractor listed for sale, demonstrating that everything worked well. I texted on a Sunday night and he responded quickly, answered my questions, and on Monday morning we finalized the deal. Our new tractor was delivered a few days later and everything worked great. Thanks for your friendly help and the great tractor. Thought I would give you an update on the Bobcat. It arrived yesterday afternoon. Luckily the weather had improved and the temps were in the 20’s instead of below zero. The trucker was a great guy we had a lot of time together to get acquainted! His initial drop in this area was in Sidney, MT – about 4 hours NW of here. He was there yesterday morning and could not get the other skid steer he was delivering started after a couple hours trying – they finally had to get a crane to off-load it. Anyway, he arrived at my place (I met him outside of town) at about 2 o’clock in the afternoon so we could unload at my ranch instead of in town. He immediately got stuck in the snow, but we were able to off-load the Bobcat (it started right up with no problems). Then it was time to “un-stuck” his rig. Only with the assist of the Bobcat pulling were we able to get him out of the snow filled ditch! I thought we were finished when he became stuck in the snow again during the process of turning around. This time the Bobcat was of no use since he became completely buried up to the axles. We had some time to contemplate our next options which looked grim – so I called my neighbor about two miles away who has a John Deere150hp 4 wheel drive tractor (my tractor is too small would not have been strong enough). It took him about 45 minutes to arrive and the buried rig was immediately yanked out of the snow. So, the trucker (Blaine – from Texas) was finally back on the road after a 3 1/2 hour stop at my place. We sent him on his way with a gift of a pair of gloves and a fur hat neither of which he had with him in case he needed to be out in the cold again!! We had a lot of laughs and we invited him to come back for a visit in the summer – he said if he never saw Montana or North Dakota again – it would be just fine with him! We started moving snow immediately after his departure for a few hours until it was time to call it a day. The Bobcat runs great, just as you said and we are completely satisfied with all aspects of it’s operation. Even if it was in the dead of winter! We made it back to Kentucky with only a blow out on a tire. Thanks for all your help and great kindness. You guys are the most helpful and friendliest people I have ever had the pleasure of doing business with. The Terramite arrived here late yesterday afternoon, all went well. Years ago people would make deals with a hand shake and a promise and you knew the job would get done, that was called integrity. Unfortunately broken promises have made that type of arrangement skepticalthat things really will go as planned. Thank you for your integrity and building bridges of trust and good will. Will recommend your business to others. Lucky Phillips knows how to extend that hand shake across borders. I wanted to take the time to contact you and let you know what a pleasure it was to do business with you. It is a pleasure to do business with an honest businessman and I will definitely recommend you to anyone I know in the market for items you sell. John Deere builds too many different variations on these kinds of things. I wondered if you would meet the minor details of our agreement. All three were met. Your shipper was professional, congenial and delivered on time with quality equipment, not a second class service. If ever in the market again I would have no qualms purchasing from your dealership. Thanks for everything – Dick (Dick Bought a John Deere 990 Tractor). We got the tractor today and love it!!! You guys are the real deal. Nice to know there are still other reliable, good people in this world. (05-19-2010 Bought a John Deere 5410 Tractor). This unit is exactly as advertised, and more. Was a little worried about purchasing from dealer out of town, but you have restored my faith in humanity, being an honest businessman, giving fair deals on nice equipment. Lucky, Just wanted to let you know I made it home in one piece and thank you very much for you help in loading the bike. I didn’t want to admit it but I had rolled my ankle a few days before and it was killing me, I was worried about getting it up in the trailer. If you ever need a reference feel free to have anyone contact me. The bike was as advertised, everything met expectations and the deal went exactly as planned with no surprises. Thank you very much! Gary, Harley Ultra Motorcycle Sept 5. We sell all Vehicles and Equipment AS/IS Only. Listed items may at any time be ended due to local sales from our dealers lot. All of the equipment, vehicles and attachments advertised have been checked for Major Leaks Only and Major Mechanical Problems Only and are Field or Road Ready unless stated otherwise. Transporting Motorized Items into Canadian I can Help You! You need to Review RIV (Register of Imported Vehicles) Vehicles Older than 1998 are Exempt from RIV. Luckys Auto Sale is Located in Shippensburg Pa 17257. The item “KOBELCO SR35SR-2 Mini Excavator SR35 Tilt Swing 2 Bucket FULLY SERVICED 6146Hr” is in sale since Wednesday, June 6, 2018. This item is in the category “Business & Industrial\Heavy Equipment\Excavators”. The seller is “luckys_auto_sales” and is located in Shippensburg, Pennsylvania. This item can be shipped to United States.
Wrag EX660, Commercial Duty Excavator Post Driver: Self-Contained, Springless, Hydraulic Tilt Adjustment! Expect This Post Driver & ALL Of The Equipment We Sell To Be Quality Equipment That Will Serve You Well For A Lifetime And Provide A Good Resale Value Too! In addition To Hydraulic (left & right) Tilt Adjustments & 110 , 000lb’s of’Springless’ Driving Force, this Wrag Driver is also Self-Contained! The Self-Contained Feature eliminates the need to run a hydraulic return line hose to the hydraulic reservoir filler neck! The Springless feature eliminates the maintenance & seasoning of springs, the expensive replacement cost of them, and also eliminates the down time caused by broken springs! Plus, the Unique Springless, Drop Weight type of Hammering action, makes this the most Stable Driver available – again contributing to efficiency & Straight Posts! Front & Back Tilt adjustment uses the Excavators bucket dump/rollback, and of course, Boom & Dipperstick functions. Wrag Multi-Lever Controls are Always Placed in Safe Locations, Convenient for Access & Visibilty! Expect the 7/8 diameter, industrial poly/cotton braided Rope to have a very long, trouble free service life, and to be easy & safe on & for your hands! This Unique Driver is also void of cables & hinged masts, which are more maintenance points, and which occasionally work against the operator! One photo shows the Standard Safety Shield on ALL Wrag Drivers & Must be Used for Personnel Safety! Photos w/o the Guard are shown for product detail clarity – Driver includes the Guard & it Must be used! Also, since the post is not nested in the webbing of an’I’ beam (as w/most Drivers), this Wrag Driver enables filling an existing fence line with posts, w/o stretching or damaging the existing fence! Pin-On Excavator Mount is hardware attached to accommodate versatility of mounts. This Driver can be used with Skidsteers, Telehandlers, Backhoes, Wheel Loaders, etc. W e do have mounts available to list for those applications! Sample photos of the Driver on a Skid Steer are provided to depict the larger 660lb Weight – the weight included in this listing. 880lb weight will reduce the driveable post length by 8″-10″. Maximum Driving force with the 880lb weight is 128,000lb’s. Driver Ships Complete Including. Brand & Model Specific Excavator Kit with Stabilizer Legs & Stand. Brand & model Information must be provided for correct mount. Lead times for various brands & models vary widely. Hydraulic Hoses & Couplers. Ships 99% assembled – Only the Excavator Plate will need to be attached. For the toughest ground and/or largest post diameters, there is an optional Rock Spike & Extractor kit for making Pilot Holes. Standard Rock Spike Tip is 4 diameter. With Rock Spike & Extractor Kit’Mounting Lugs’ being a standard feature on this Driver, installation is a quick & simple one-bolt activity! The Spool Valve required for operating the Rock Spike & Extractor Kit is also standard on this Driver. Images of the Rock Spike can be seen at: Wrag USA. Adapters have the same cost, but vary in dimension & configuration – specific application must be identified to get correct Adapter. Driver is shown on an Excavator & Skid Steer for reference only – Excavator or Skid Steer are not included. One photo shows the Safety Shield’ Standard on ALL Wrag Drivers’ & Must be Used for Personnel Safety! View a Video of this Post Driver at work at the following link. Minimum hydraulic requirement is 15GPM/1800PSI. Maximum post diameter 8-1/4. Driver Leg Fully Extended 48. Drives maximum 10′-7 long post. Drives down to 4′-0 above grade. Driver Leg Fully Retracted. Drives maximum 7′-10 long post. Drives down to 13 above grade. Hammer weight is 660lb’s. Impact at full stroke is 110,000lbs. Overall length in the fully contracted position is 11′-0. Overall length in the fully extended position is 14′-0. Tilt Adjustment (left/right) is 17° either way. Tilt Adj (front) is based on dump rotation of Loader Arms. On most Skid Steers, this is full 90° forward rotation. Tilt Adjustment (rear) is 10 Degrees. A FULL SERVICE DEALERSHIP. +More Contact Information Can Be Found On Our’About Me’ Page! The item “POST DRIVER, POST POUNDERWRAG EX660 Excavator Mounted, Hyd Tilt, 110,000lbsForce” is in sale since Tuesday, January 24, 2017. This item is in the category “Business & Industrial\Agriculture & Forestry\Livestock Supplies\Fencing”. The seller is “farmequipment24-7″ and is located in Tipton, Iowa. This item can be shipped to United States.
More Options ...
Categories
Tag Cloud
Blog RSS
Comments RSS
Void « Default
Life 
Earth 
Wind 
Water 
Fire Light 
Previous Entries
Last 50 Posts
Back