Excavators

Before purchasing this 1000mm plain bucket attachment, please make sure to confirm the connection size first. Material: manganese steel Bucket Width: 39.37in. (90mm) Hinge Pin Length: 4.61in. (117mm) Overall Dimensions: 39.37×12.20×1 10.83in(1000×310x275mm). Transit timevaries and depends on the carrier, we can not be held responsible for delays caused by carriers. Please take BOL while picking up the goods in our US warehouse. (Unless stated otherwise in the listing).

The connection size is. Please noted: before purchasing this hydraulic tilting bucket attachment, please make sure to confirm the connection size first. 600mm Tilting Bucket Attachment for Mini Excavators Bucket With oil pipe & pins. Please noted : before purchasing this hydraulic tilting bucket attachment, please make sure to confirm the connection size first. The hydraulic tilting design of the bucket allows for 45 degrees of movement in each direction. This unique feature significantly enhances the maneuverability of the attachment, providing greater control and flexibility during operations. Increased Productivity: Ideal for bulk excavation of loose material and precision trimming of excavated sites, the tilting bucket boosts productivity. Its ability to tilt at a 45-degree angle on both sides increases production efficiency by enabling precise and controlled movements. This product has undergone rigorous quality testing Durable and easy to install and replace The most cost-effective and best after-sales service Quality assurance that gives you peace of mind. 1 × 600mm Tilting bucket (with oil pipe + pin shaft). If you are not satisfied with our items, please contact me to have a return address. We resolve them as quickly as possible. Thank you very much! You have the responsibility to check the correct parts. Thank you for your understanding. We maintain a high quality service and dedicated to helping our customers by heart. Feedbacks are important to our company. We hope that you contact me immediately before you write a feedback from a neutral or a negative, please give us a chance to solve your problem. We make every effort to portray the items we sell with our responsibility. Yard, Garden & Outdoor Living. Pool Equipment & Parts. Ropes, Cords & Slings. Weed & Pest Control. Plant Baskets, Pots & Boxes. Landscape & Walkway Lights. Protective Netting & Mesh. Folding & Step Ladders. Planting & Breeding Equipment. Hardware Cloth & Mesh. 10Pcs 1/4 Straight In-Line Gas Motorcycle Fuel Shut-off/Cut-off Valves Petcock. 3Kit 1/4 In Line Fuel Gas Filter Shut Cut Off Valve Clamp For Briggs & Stratton. Carburetor Carb for Briggs & Stratton 799868 799872 790821 5.5hp 6.5hp 6.75hp US. Carburetor For Echo SRM-225 GT-225 PAS-225 PE225 PPF225 SHC225 SRM225U Trimmer. 800mm Bucket For 1-1.8T Mini Excavator Attachment Equipped With Pin. 5 Gallon (6-pk) Black 12 Inch Plastic Premium Nursery Planter Garden Grow Pots. 5 Gallon (5-pk) Black Plastic Premium Nursery Planter Garden Grow Pots 12 Inch. Skid Steers Loader Muffler 6514737 For Bobcat 642 643 645 742 Skid Steers Loader. For Kubota Excavator Quick Attach Bucket Ears Attachment U35 KX71 KX91 KX121.

New unused Lyals 37 wide cut mini Excavator, excavator drum mulcher. For 75-90 size excavators (7.5-9 ton) Comes with 50mm pins ideal for machines that use 50mm pins. Measures 8.25 inches between the mounting brackets. Weighs 1025lbs, 3 hose hookup supply, return and case drain. Comes with 3 extra hydraulic fittings and a additional case drain hose. The teeth on the drum Can be rotated 4 directions before replacing. The pin center to center measures 12 3/16 inches. For this attachment your pin center to center can vary from this measurement when using as a pin on attachment. If using a hydraulic or manual coupler (not a pin on attachment) your pin center to center will need to be very close to this one(12 3/16). Message me with any questions.

Before purchasing this 500mm plain bucket attachment, please make sure to confirm the connection size first. Material: manganese steel Bucket Width: 20in. (500mm) Hinge Pin Diameter. (25mm) Hinge Pin Hole Spacing 3.54in. (90mm) Hinge Pin Length: 4.61in. (117mm) Overall Dimensions: 20×12.20×1 (500×310x275mm). Transit timevaries and depends on the carrier, we can not be held responsible for delays caused by carriers. Please take BOL while picking up the goods in our US warehouse. PLEASE NOTE THAT THE RECEIVER SHOULD RESPONSIBLE FOR THE EXPENSE OF UNLOADING. (Unless stated otherwise in the listing).

NEW FOR Cat 305 305.5 306 Excavator ears and pins Weld on 45mm 10-1/4 C- C US. Built to strict quality control standards. Mounts up to the original equipment perfectly. Cat 305 305.5 306. Spacing between pins center to center is these are great to modify an existing bucket to fit a new machine, or to use for connection to an attachment. Care and proper bracing must be used while welding as a small pull or warp will cause pin misalignment. To ensure the items you are interested in fit your needs, please do some background research and ask as many questions as you need to be certain you get what you are looking for. Due to the light and screen difference, the item’s color may be slightly different from the pictures. Please check whether this item can fit on your car before purchasing. If you not familiar with DIY, please ask professional for help. We highly recommend asking your local dealer to ensure compatibility. 1 Excavator ears and pins Weld on 45mm 10-1/4 C- C. Our company has warehouses in CA and NJ, and we will send your order to the nearest location. If you are missing any parts, or need replacements, we will gladly provide those items upon request. Customer feedback is important to us. We are (and always will be) committed to providing our customers with the best possible online shopping experience, exceptional quality products and extraordinary value. If we’ve fallen short in any way, or if there’s anything we can do to assist or improve your shopping experience with us, we want to know!

Made specifically for mini excavators, suitable for small excavators from 0.8 tons to 1.5 tons models, strong and durable. This ripper attachment can be used on most other heavy equipment and below. The pin is suitable for use with other brands of machines. Using the special tip on the end of the arm, the ripper can cut through almost any object with minimal effort from the operator. Rippers allow you to cut down large trees and shrubs with relative ease and remove small stumps of any size. They are also good at tearing up old barbed wire and other materials that are difficult to remove by other means. Used for the crushing and splitting of hard soil, semi-hard stone and weathered stone. This makes up for the working environment where the crusher is inefficient and the bucket cannot solve. Before purchasing this ripper attachment, please make sure to confirm the connection size first.

Made specifically for mini excavators, suitable for small excavators from 0.8 tons to 1.5 tons models, strong and durable. This ripper attachment can be used on most other heavy equipment and below. The pin is suitable for use with other brands of machines. Using the special tip on the end of the arm, the ripper can cut through almost any object with minimal effort from the operator. Rippers allow you to cut down large trees and shrubs with relative ease and remove small stumps of any size. They are also good at tearing up old barbed wire and other materials that are difficult to remove by other means. Used for the crushing and splitting of hard soil, semi-hard stone and weathered stone. This makes up for the working environment where the crusher is inefficient and the bucket cannot solve. Before purchasing this ripper attachment, please make sure to confirm the connection size first.

ATTACHXPRO 800mm (31.5) Hydraulic Tilt Bucket Kit for Mini Excavator. 800mm / 31.5 wide tilt bucket for faster grading, ditching, and shaping. Hydraulic tilt function improves angle control and reduces repositioning time. Complete kit included : bucket + 2 hydraulic hoses + 2 pin shafts. Package Includes (Only What’s Listed). 1 × 800mm Tilt Bucket. 2 × Two Hydraulic Hoses. 2 × Pin Shaft. Note: Please verify pin diameter and mounting dimensions before ordering. 800mm / 31.5in. 25mm / 0.98in. 92mm / 3.62in. 90mm / 3.54in. Fitment & Verification (Important). This is a Universal attachment. Pin Diameter: 25mm (0.98). Span: 92mm (3.62). Center Wheelbase: 90mm (3.54). Tip: If you’re unsure, message us your excavator coupler measurements and we’ll help you confirm compatibility. Order processing: We dispatch as soon as the nearest warehouse confirms allocation. Please verify the pin size and mounting dimensions before purchasing. If you need help confirming fitment, message us first-we’re happy to assist. ATTACHXPRO – Heavy Equipment Attachments & Parts. Measurements are provided for fitment verification.

Before purchasing this 500mm plain bucket attachment, please make sure to confirm the connection size first. Material: manganese steel Bucket Width: 20in. (90mm) Hinge Pin Length: 4.61in. (117mm) Overall Dimensions: 20×12.20×1 (500×310x275mm). Transit timevaries and depends on the carrier, we can not be held responsible for delays caused by carriers. Please take BOL while picking up the goods in our US warehouse. PLEASE NOTE THAT THE RECEIVER SHOULD RESPONSIBLE FOR THE EXPENSE OF UNLOADING. (Unless stated otherwise in the listing).

Excavator ears and pins Weld on 45mm 10-1/4 C- C FOR Cat 305 305.5 306 US. Built to strict quality control standards. Mounts up to the original equipment perfectly. Cat 305 305.5 306. Spacing between pins center to center is these are great to modify an existing bucket to fit a new machine, or to use for connection to an attachment. Care and proper bracing must be used while welding as a small pull or warp will cause pin misalignment. To ensure the items you are interested in fit your needs, please do some background research and ask as many questions as you need to be certain you get what you are looking for. Due to the light and screen difference, the item’s color may be slightly different from the pictures. Please check whether this item can fit on your car before purchasing. If you not familiar with DIY, please ask professional for help. We highly recommend asking your local dealer to ensure compatibility. 1 Excavator ears and pins Weld on 45mm 10-1/4 C- C. Normally, you can expect 2. If you are missing any parts, or need replacements, we will gladly provide those items upon request. We will give you a satisfactory answer.