Excavators

14 Komatsu PC88MR-10 Midi Excavator, 3,583 hours. 2014 Komatsu PC88MR-10 Midi Excavator, 3,583 hours – 2 speed, back up camera, Cold AC, radio, manual coupler, 12 bucket, rubber pads 80%, auxiliary hydraulics, excellent condition. Our Pre-Owned Used equipment is used in our landscaping division on job sites once we have completed the job, we list the surplus equipment for sale. Each machine gets serviced and any repairs, if needed will be completed prior to use. We are not a dealer, we sell our landscape companies surplus equipment. F you have any interest pertaining to the machine for sale or would like to view our full inventory, please search Accurate Management Equipment. ALL ITEMS ARE FOR SALE LOCALLY. For our contact information. Accurate Management Equipment reserves the right to. Accurate Management Equipment welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure.

2001 Link-Belt 2700Q Crawler Excavator for Sale in Council Grove, KS 66846. Good mechanical unit, runs and operates well. Electronic readout and throttle are inoperable, and it has a few seeps. Comes with a 4′ and 2′ wide bucket. Options and Standard Features. No expressed or implied warranties, including the availability or condition of the equipment listed is made unless otherwise stated in writing. EPA mileage estimates for comparison purposes only. Actual mileage may vary depending on driving conditions, driving habits, and vehicle maintenance.

2019 BOBCAT E35I MINI EXCAVATOR. 233 Hours, Rental Return (Hours & Availability Subject To Change), Comfort 21 & Performance 50 Packages, Open Station W/ Canopy, Keyless Start, Suspension Seat, 2 Speed, Long Arm, AUX Hydraulics, Hydraulic Thumb, Standard X-Change Coupler, 69″ Backfill Blade, 24.8 HP Kubota Diesel Engine, 7,699 LB Operating Weight, 10.2′ Max Dig Depth, 12″ Rubber Tracks, Machine may not sell with bucket pictured. Machine may sell with a similar used bucket. Please call to confirm location! Sales, Service, Parts and Rentals. Multi-Store Authorized Bobcat Dealer. However, if an item remains at our location for more than 30 days, the item can be resold to recover storage costs and the original purchaser will not receive any of the proceeds. Many items we sell online are also available locally in store as well. We do our best to keep our online inventory up to date but recommend verifying availability of any item prior to purchasing. We are happy to speak with you and will answer any questions to the best of our ability. Therefore, we cannot and do not guarantee the hours of service on any of the items we sell. We do guarantee that we never turn back hour meters or tachometers so the information we report for an item is taken directly from the specific meter. If a machine shows low hours or miles, etc. That do not appear to be correct, we will tell you that. Otherwise, our information is from the machine and is not guaranteed as to accuracy. All information we provide for items such as serial numbers, weights, horsepower, lift capacities, year, etc. Is taken from sources generally deemed to be accurate. We do not guarantee that information but provide it for your assistance. Please keep in mind that we will NOT release any equipment without proper documentation. Proper documentation includes but is not limited to a valid Bill of Lading, Paid Invoice, etc. Any person picking up any item(s) may be asked to show I. Is proud to offer a wide variety of new and used equipment as well as parts, service and rentals. We are an authorized Bobcat dealer with convenient locations in York, Lancaster & Adams County, Pennsylvania as well as Frederick & Hagerstown, Maryland. We believe that people should always come first and do our best to back up that principle. Our growth and success depends on our customers, just like YOU. So please allow us the chance to keep you happy!

Up for sale is a nice clean 2018 Case CX80-C Mid size excavator with a Full cab! It has the long stick for a digging depth of 15.4 feet! It has been check out from one end to the other, ready for work, Full service about 50 hours ago and we just service the engine, Very well maintained machine. Undercarriage is around 80% Rubber pads! It is showing Only 1404 hours! Well maintained hours, Runs and operates like a new one. Loaded Cab with heat and A/C! Machine starts and runs like it should, without any issues. It is straight and clean all over with little dents in sheet metal and paint. It has a 56 hp Isuzu diesel engine that has no blowby. The unit is tight and everything works like it should. It has one and 2 way auxiliary hydraulics plumbed to the boom to operate a thumb or hammer. It comes with a quick attach 36 tooth bucket. Machine weight is 18900bs. There is no major leaks, machine is ready to go to work today.

We just refurbished this unit. (2) New Drive Motors. Runs Perfect and looks Great. 10′9 Digging Dept. Please call me if you have any questions.

2020 BOBCAT E35i MINI EXCAVATOR. 352 Hours, Rental Return (Hours & Availability Subject To Change), Comfort 21 & Performance 10 Packages, Open Station W/ Canopy, Keyless Start, Suspension Seat, 2 Speed, AUX Hydraulics, Hydraulic Thumb, Standard X-Change Coupler, 69″ Backfill Blade, 24.8 HP Kubota Diesel Engine, 7,699 LB Operating Weight, 10.2′ Max Dig Depth, 12″ Rubber Tracks. Machine may not sell with bucket pictured. Machine may sell with a similar used bucket. Please call to confirm location! Crownstone Certifications and their meanings. All known issues disclosed, inspection available upon request. Sales, Service, Parts and Rentals. Multi-Store Authorized Bobcat Dealer. However, if an item remains at our location for more than 30 days, the item can be resold to recover storage costs and the original purchaser will not receive any of the proceeds. Many items we sell online are also available locally in store as well. We do our best to keep our online inventory up to date but recommend verifying availability of any item prior to purchasing. We are happy to speak with you and will answer any questions to the best of our ability. Therefore, we cannot and do not guarantee the hours of service on any of the items we sell. We do guarantee that we never turn back hour meters or tachometers so the information we report for an item is taken directly from the specific meter. If a machine shows low hours or miles, etc. That do not appear to be correct, we will tell you that. Otherwise, our information is from the machine and is not guaranteed as to accuracy. All information we provide for items such as serial numbers, weights, horsepower, lift capacities, year, etc. Is taken from sources generally deemed to be accurate. We do not guarantee that information but provide it for your assistance. Please keep in mind that we will NOT release any equipment without proper documentation. Proper documentation includes but is not limited to a valid Bill of Lading, Paid Invoice, etc. Any person picking up any item(s) may be asked to show I. Is proud to offer a wide variety of new and used equipment as well as parts, service and rentals. We are an authorized Bobcat dealer with convenient locations in York, Lancaster & Adams County, Pennsylvania as well as Frederick & Hagerstown, Maryland. We believe that people should always come first and do our best to back up that principle. Our growth and success depends on our customers, just like YOU. So please allow us the chance to keep you happy!

2020 Yanmar VIO17-A Mini Excavator – 3,836 lbs. 36 HP – 970 Hours – Serviced. Part of active rental fleet. This excavator does not have any known mechanical issues, runs strong, all functions working, and ready to work on your job site today. 970 hours on working meter. More pictures and videos available upon request. 7.3 ft (2 m). 8.7 ft (2 m). Max Reach Along Ground. 7.6 ft (2 m). 11.4 ft (3 m). 0.1 cu yds (0 m). 0.6 ft (0 m). Length of Track on Ground. 5.1 ft (2 m). 2.1 ft (1 m). Width to Outside of Tracks. 4.2 ft (1 m). 13.6 hp (10 kw). Hydraulic Pump Flow Capacity. 15.4 gal/min (57 l/min). Hydraulic System Relief Valve Pressure. 3836.1 lbs (1,740 kg). 2.7 mph (3 kph). 9.1 in (23 cm).

2022 Wacker Neuson EZ53 Mini Excavator – 14,178 lbs. Only 252 Hours – w/Thumb. Part of active rental fleet. This excavator does not have any known mechanical issues, runs strong, all functions working, and ready to work on your job site today. We are an Authorized Wacker Neuson Dealer in South Florida. 252 hours on working meter. Unit comes with pictured hydraulic thumb. More pictures and videos available upon request. Boom/Stick Excavator Option 1. 17.4 ft (5 m). 11.5 ft (3 m). 12.1 ft (4 m). Max Reach Along Ground. 19.3 ft (6 m). Max Vertical Wall Digging Depth. 8.8 ft (2 m). 8.5 ft (2 m). 18.1 ft (5 m). Boom/Stick Excavator Option 2. 18 ft (5 m). 12.4 ft (4 m). 12.6 ft (4 m). 20.1 ft (6 m). 9.6 ft (3 m). 1.1 ft (0 m). Height – Top of Cab. Length of Track on Ground. 3.3 ft (1 m). Width to Outside of Tracks. 6.6 ft (2 m). 135.2 cu in (0 m). 58.9 hp (43 kw). 21.9 gal (79 l). Hydraulic Pump Flow Capacity. 41.6 gal/min (155 l/min). Hydraulic System Fluid Capacity. 19.3 gal (72 l). Hydraulic System Relief Valve Pressure. 14178 lbs (6,431 kg). 2.9 mph (3 kph). 15.7 in 38 cm.

2019 JCB 45Z-1 Mini Excavator – 9,879 lbs – 1007 Hours – Serviced – Ready 2 Work. Part of active rental fleet. This excavator does not have any known mechanical issues, runs strong, all functions working, and ready to work on your job site today. 1,007 hours on working meter. More pictures and videos available upon request. Thanks for looking! Powerful Tier-4-Final JCB Diesel by Kohler engine that requires no DPF. Enhanced Safety: The powerful JCB 45Z-1 features a wide track frame and low center of gravity, for exceptional stability. Coupled with improved visibility over earlier models, and numerous other safety enhancements, the 45Z-1 provides easier and safer trench digging and maneuvering capabilities. The JCB Safety Lever Lock fully isolates the hydraulic functions, to prevent unintended movement. Furthermore, the unique JCB 2GO system requires two separate inputs, to ensure the hydraulics can only be operated in a safe lockable position. The optional Safe Lift feature, complete with an integral lift overload warning system, is an industry first in this class. Safe Lift incorporates a green-amber-red graphic in the monitor panel, with an audible warning that sounds if the machine approaches overload. Durable Performance: The 45Z-1 shares the durable design proven on the larger machines in JCB’s next-generation compact excavator range, with 100 percent steel bodywork and sturdy four-plate dipper construction. The dig end uses 100 percent graphite-impregnated bushings, leading to extended 500-hour greasing intervals. Revised bucket pin pick-up points allow the machine to work with a number of competitive bucket brands, while optional hydraulic or manual quick hitches can be specified for faster attachment changeover. The 45Z-1 compact excavator features a new dig end, with a longer main boom and shorter dipper arm than the previous 8045 ZTS, to provide a dump height of 13 feet 1 inch (4 m), for easier truck and site dumper loading. The upgraded hydraulic system also delivers up to 8,542 lb (38 kN) bucket breakout force and dipper breakout of 4,945 lb (22 kN), boosting performance and productivity. Improved Efficiency: With class-leading greasing intervals of 500 hours and machine diagnostic status reports delivered via the new, in-cab monitor, JCB excavators streamline maintenance requirements and reduce machine downtime. Fuel consumption is minimized by several smart features. For example, engine speed is automatically reduced when the operator’s armrest is raised. Additionally, a’one-touch’ idle feature, and programmable auto-idle, enable dramatic fuel reductions with minimal input necessary from the operator. Four power bands-Light, Eco, Heavy, and Heavy Plus-allow the engine speed to be matched to the hydraulic flow requirements for the attachment and application at hand. A patented low-pressure return line circuit further improves fuel efficiency by eliminating the need to for the pump to overcome high pressure on start-up. Load-sensing hydraulics are standard-fit equipment on the 45Z-1, limiting the consumption of power by the hydraulic system to when it is needed most. Livelink: A key feature of JCB’s LiveLink telematics system is the immobilizer with remote pin code management system, which allows a fleet manager to remotely authorize or deny usage of a machine. Up to 14 individual pin codes can be programmed into the system, allowing custom operator preferences to be programmed into the machine, and hydraulic flow settings for specific attachments can be set, adjusted and stored. Machine service and diagnostics information, along with alerts and service interval countdowns, support efficient maintenance scheduling. Purpose-built to be the largest rental-ready compact excavator that can be towed without a commercial driver’s license (subject to local regulations). 100 percent steel body work. Zero tail swing. Easy Servicing: Graphite-impregnated bronze bushes on the dig end allow the JCB 45Z-1 compact excavator to offer best-in-class 500-hour greasing intervals. An open frame undercarriage, with sloping track legs, makes cleaning easier. Color-coded hydraulic hoses make for easy identification, and the dozer hoses terminate at the bulkhead, making them easy to replace when needed. The 45Z-1 is fueled from ground level via a wide-opening steel bonnet and external fuel indicator. An optional refueling pump with auto stop reduces spillages for improved safety. The cab floor is easily removed, to inspect or replace the main control valve spools, hydraulic connections and other components. Structural Strength: The 45Z-1 shares the durable design proven on the larger machines in JCB’s next-generation compact excavator range, with 100 percent steel bodywork and sturdy four-plate dipper construction. The fully robot-welded boom and dipper are made of high tensile steel, with internal baffle plates in the boom for enhanced durability. A heavy-duty boom cylinder guard and optional dipper and crowd ram guards provide maximum protection for the excavator arm. An optional heavy-duty kingpost features durable re-bushable pivots to optimize service life and provides enclosed routing for hydraulic hoses. O-Ring Face Seal (ORFS) hydraulic fittings, provide excellent, leak-free sealing capabilities. JCB relies upon trusted industry names for critical components, including Kohler engines, Nachi and Bosch-Rexroth hydraulic components, and Bridgestone tracks. Variable geometry hitch for diverse attachment compatibilit. No-frills, rental-ready specification for optimal cost and weight savings. Graphite bushes for 500-hour greasing intervals on dig-end pivot points. Operator Comfort And Control: JCB compact excavators deliver impressive levels of comfort for the operator, with reduced noise and vibration levels. The advanced display screen and control system, with an automotive-style rotary controller, allows easy access to a host of systems and information. The operator can set auxiliary hydraulic flows for two separate attachments, while the menu mode button switches the rotary controller between throttle modes, including a one-touch idle function and menu mode. The 45Z-1 is also offered with a new membrane switch panel to control auxiliary flow settings, working lights, beacon, wipers and JCB’s 2Go hydraulic activation safety system. Productivity has been further enhanced with the adoption of an electro-hydraulic dozer control lever, with up to two buttons in the head to control two-speed tracking and dozer float. Separate buttons in the control-lever head activate “auto kick-down” two-speed tracking. 11 ft 11 in. 13 ft 1 in.

23 John Deere 160P. 2023 DEERE 160P Crawler Excavator for Sale in Roseburg, OR 97470. For Sale & Ready to Work. Rear Camera System Less Grade Reference Ready Mounts John Deere PowerTech PSS 4.5L meets FT4/EU Stage IV Emissions 600 mm 24 In. Steel Track with Triple Semi-Grouser Shoes One Piece Boom w/Arm Cyl. And Plumbing Auxiliary High-Flow Lines with AFL and Auxiliary Relief Pressure Adjustment Hydraulic Coupler Ready Lines and Controls. For assistance with Financing, Transportation, Inspection, or if you would like a FREE Vehicle Valuation, please message us through. And we will get right back to you. Options and Standard Features. Net Horsepower (HP): 122. Operating Weight: 39,001 – 40,000 lbs. Dig Depth: 21′1” – 22. No expressed or implied warranties, including the availability or condition of the equipment listed is made unless otherwise stated in writing. EPA mileage estimates for comparison purposes only. Actual mileage may vary depending on driving conditions, driving habits, and vehicle maintenance. Steel Track with Triple.