4435 St Hwy 274. 2020 KUBOTA KX033-4 OROP MINI COMPACT TRACK EXCAVATOR WITH 2-SPEED, FRONT AUX, 24″ QUICK ATTACH BUCKET, HYDRAULIC THUMB, 4-WAY FLOAT ANGLE BLADE, 24.8 HP, MAX DIG DEPTH OF 12′2″, AND AN OPERATING WEIGHT OF 7,781 LBS! Options and Standard Features. 24 Quick Attach Bucket. Max Digging Depth: 10′6. Operating Weight: 7,781 LBS. Output (HP)/Rpm: 24.8 / 2200. Pump Capacity Gpm 10.5 X 2 / 5.5. Bucket: 8,138 LBS. Low Speed: 6091 LBS. Tumbler Distance: 5′5.6. Crawler Length: 6′10.6. Ground Contact Pressure: 4.583PSI. Overall Length: 15′6. Overall Height: 8′1. Overall Width: 5′1. Ground Clearance: 11.4. Right: 1′4.1. Left: 1′5.7. Lift Above Ground: 15.9. Drop Below Ground: 18.9. Angle Left/Right: 25/25 Degrees. Upper: 1′2.4. Low: 1′2.8. Unit Swing Speed: 8.9RPM. Only 55 miles South East of Dallas. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in this country: US. This item can be shipped to United States.
4435 St Hwy 274. Options and Standard Features. 18 Quick Attach Bucket. Max Dig Depth: 12′8. Operating Weight: 12,200 LBS. Gross Horsepower: 47.6HP. Net Horsepower: 45.4HP. Displacement: 159.6 CU IN. Fuel Reservoir: 19.8 GAL. Travel Speed: 1.8MPH. Travel Speed High: 3.1MPH. Crawler Length: 8′2.4. Shoe Width: 1′3.7. Ground Contact Pressure OROPS: 4.54PSI. Pump Capacity: 14.8GPM. Auxiliary Hydraulic Flow: 19.8GPM. Minimum Ground Clearance: 1′0.2. Tail Overhang Over Side: 2.6. Blade Left Above Ground: 17.3. Blade Drop Below Ground: 16.1. Arm (Stick) Length Used For Dimensions & Forces: 6′ 0. Max Dig Depth: 12′ 8.2. Max Depth Of Vertical Wall: 5′ 7. Dump Height: 13′ 9. Dig Radius: 20″5.7″. Boom Swing, Right/Left (Deg): 55° / 70°. Bucket Digging Force: 11,177LBS. Bucket Capacity, SAE Heaped Min-Max (cu ft): 3.0 – 8.5. Unit Swing Speed: 9.3RPM. THE KX057-4 IS POWERED BY KUBOTA’S IMPRESSIVE 47.6 HP DIRECT INJECTION ENGINE. ENGINEERED WITH THE POWER TO MAXIMIZE DIGGING AND LIFTING PERFORMANCE, IT ALSO DELIVERS MINIMIZED NOISE, VIBRATION, AND FUEL CONSUMPTION. THE KX057-4 DELIVERS AN IMPRESSIVE BUCKET DIGGING FORCE OF 11,177 LBS. ITS POWERFUL AND WELL-BALANCED ARM AND BUCKET ALLOW THE OPERATOR TO DIG FASTER AND MORE EFFICIENTLY EVEN IN THE TOUGHEST CONDITIONS. Only 55 miles South East of Dallas. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. ITS POWERFUL AND WELL-BALANCED ARM AND BUCKET ALLOW THE OPERATOR TO DIG FASTER AND MORE EFFICIENTLY EVEN IN THE TOUGHEST CONDITIONS SE HABLA ESPAÑOL! This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in this country: US. This item can be shipped to United States.
FRONT IDLER WHEEL FOR. WE CAN OFFER UNDERCARRIAGE COMPONENTS FOR MOST MINI EXCAVATORS, TRACKED DUMPERS AND CHIPPERS OFF THE SHELF, AND ARE. EUROPE’S LARGEST AFTERMARKET STOCKIST OF TOP ROLLERS, BOTTOM ROLLERS, SPROCKETS, IDLERS, RUBBER TRACKS, STEEL TRACKS, BOOM PINS & BUSHES, BUCKETS AND ATTACHMENTS. WE ALSO SPECIALISE IN THE MANUFACTURE AND SUPPLY OF BUCKETS AND ATTACHMENTS WHICH ARE PRODUCED AT OUR NEATH FACTORY – WE OFFER A FULL BESPOKE SERVICE FOR SPECIAL PROJECTS. OUR TECHNICAL KNOWLEDGE IS UNRIVALLED IN THE INDUSTRY. IF YOU WISH TO. PAY BY CARD OR BANK TRANSFER. BANK AND TELEPHONE INFORMATION. ORDERING INFORMATION – PLEASE READ BEFORE PURCHASING. FOR THE COURIER FIRM – WE WILL. DISPATCH THE ITEM UNTIL WE HAVE A. IF YOU ARE OUTSIDE THIS AREA WE CAN DELIVER BUT THE COST VARIES DEPENDING ON YOUR POST CODE. OUTSIDE OF THE UK. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “mcplantspares” and is located in this country: GB. This item can be shipped worldwide.
FRONT IDLER WHEEL TO SUIT A HITACHI. WE CAN OFFER UNDERCARRIAGE COMPONENTS FOR MOST MINI EXCAVATORS, TRACKED DUMPERS AND CHIPPERS OFF THE SHELF, AND ARE. EUROPE’S LARGEST AFTERMARKET STOCKIST OF TOP ROLLERS, BOTTOM ROLLERS, SPROCKETS, IDLERS, RUBBER TRACKS, STEEL TRACKS, BOOM PINS & BUSHES, BUCKETS AND ATTACHMENTS. WE ALSO SPECIALISE IN THE MANUFACTURE AND SUPPLY OF BUCKETS AND ATTACHMENTS WHICH ARE PRODUCED AT OUR NEATH FACTORY – WE OFFER A FULL BESPOKE SERVICE FOR SPECIAL PROJECTS. OUR TECHNICAL KNOWLEDGE IS UNRIVALLED IN THE INDUSTRY. IF YOU WISH TO. PAY BY CARD OR BANK TRANSFER. BANK AND TELEPHONE INFORMATION. ORDERING INFORMATION – PLEASE READ BEFORE PURCHASING. FOR THE COURIER FIRM – WE WILL. DISPATCH THE ITEM UNTIL WE HAVE A. IF YOU ARE OUTSIDE THIS AREA WE CAN DELIVER BUT THE COST VARIES DEPENDING ON YOUR POST CODE. OUTSIDE OF THE UK. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “mcplantspares” and is located in this country: GB. This item can be shipped worldwide.
4435 St Hwy 274. 2012 BOBCAT E60 OROPS MINI TRACK EXCAVATOR, DUAL FRONT AUX, AND HYD THUMB! Options and Standard Features. No Top Or Bottom Glass – No Door – No AC. 24 Quick Attach X-Change Bucket. Max Dig Depth: 13′1. Operating Weight: 13,556 LBS. Emissions Tier (EPA): Tier 4. Auxiliary Std Flow: 20 Gal/Min. Auxiliary Pressure: 3,045 Psi. Operating Weight 13,556. Maximum Digging Depth: 13′ 6. Maximum Digging Reach: 21′ 3. Operating Weight: 12,315 Lbs. Weight Class: 6 T. Travel Speed – High: 2.8 Mph. Travel Speed – Low: 1.8 Mph. Arm Digging Force: 6,446 Lbf. Bucket Digging Force: 10,261 Lbf. Rated Lift Capacity: 6411 Lb. Lift Radius: M118 In. Boom Swing – Left: 75°. Boom Swing – Right: 50°. Maximum Dig Depth: 13.1 Ft. Max Dump Height: 14.3 Ft. Maximum Reach At Ground Level: 20.5 Ft. THE BOBCAT E60 EXCAVATOR IS THE PERFECT SIZE TO DO ALL THE BIG JOBS, YET SMALL ENOUGH TO EASILY TRANSPORT. THIS EXCAVATOR HAS THE PREFERRED LONG ARM, PLUMBED WITH DUAL AUX. HYDRAULICS FOR A THUMB, HYDRAULIC STRAIGHT BLADE! BANK FINANCING IS AVAILABLE! Only 55 miles South East of Dallas. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in this country: US. This item can be shipped to United States.
2013 Komatsu PC290 LC-10 Excavator for Sale in Dalton, NH 03598. This 2013 Komatsu is offered for sale and ready to work. Long Front – 60. 36″ & 44″ Bucket. For assistance with Financing, Transportation, Inspection or, if you would like a FREE Vehicle Valuation, please. And we will get right back to you. Options and Standard Features. Net Horsepower (HP): 213. Operating Weight: 67,001 – 68,000 Lbs. Again, we make every effort to present accurate and reliable information, use of this information is voluntary, and should only be deemed reliable after an independent review of its accuracy, completeness, and timeliness. Any and all differences must be addressed prior to time of sale. No expressed or implied warranties, including the availability or condition of the equipment listed is made unless otherwise stated in writing. EPA mileage estimates for comparison purposes only. Actual mileage may vary depending on driving conditions, driving habits, and vehicle maintenance. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. 2013 Komatsu PC290 LC-10 Excavator for Sale in Dalton, NH 03598 This 2013 Komatsu is offered for sale and ready to work. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “fsbovehicles” and is located in this country: US. This item can be shipped to United States.
4435 St Hwy 274. 2014 KUBOTA KX91-3S OROPS MINI TRACK EXCAVATOR, FRONT AUX, STRAIGHT BLADE & 2 SPEED! Options and Standard Features. 17 Quick Attach Bucket. Max Dig Depth: 10′53. Operating Weight: 7,110LBS. Net Power: 28 Hp. Displacement: 91.5 Cu In. Operating Weight: 7110 Lb. Fuel Capacity: 11.9 Gal. Hydraulic System Fluid Capacity: 9.5 Gal. Hydraulic Pump Flow Capacity: 27.3 Gal/Min. Swing Speed: 9.4 Rpm. Ground Pressure: 4.5 Psi. Max Travel Speed: 2.9 Mph. Drawbar Pull: 8363 Lb. Boom/Stick Option (HEX) 1. Max Digging Depth: 10.5 Ft In. Max Reach Along Ground: 16.9 Ft In. Max Cutting Height: 16.3 Ft In. Max Loading Height: 11.6 Ft In. Max Vertical Wall Digging Depth: 7.9 Ft In. Width To Outside Of Tracks: 5.1 Ft In. Ground Clearance: 1 Ft In. THE KX91-3S IS LOADED WITH FEATURES THAT MAKE IT THE SMART CHOICE FOR YOUR DIGGING OR DOZING NEEDS. WITH ITS POWERFUL AND CLEAN-RUNNING ENGINE, HYDRAULIC VERSATILITY, AND MORE, THE KX91-3S WILL BOOST YOUR EFFICIENCY AND PRODUCTIVITY. IT OFFERS ALL THE TOOLS YOU NEED TO GET THE JOB DONE IN COMFORT, AND ON TIME. BANK FINANCING IS AVAILABLE! Only 55 miles South East of Dallas. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in this country: US. This item can be shipped to United States.
4435 St Hwy 274. 2012 VOLVO ECR88 OROPS TRACK EXCAVATOR, 30′ BUCKET! Options and Standard Features. Pin On 30 Bucket. Engine Model: D3.4H. Net Power: 57 HP. Starter Motor Output: 12V. Width To Outside Of Tracks: 7.55 Ft. Length Of Track On Ground: 7.22 Ft. Ground Clearance: 1.28 Ft. Height To Top Of Cab: 8.8 Ft. Tail Swing Radius: 3.97 Ft. Fuel Capacity: 29.1Gal. Cooling System Fluid Capacity: 1.9Gal. Hydraulic System Fluid Capacity: 37Gal. Engine Oil Capacity: 3.1Gal. Alternator Supplied Amperage: 55Amps. Hydraulic System Relief Valve Pressure: 4354Psi. Hydraulic Pump Flow Capacity: 46Gal/Min. Shoe Size: 17.72In. Track Gauge: 6.07Ft In. Number Of Track Rollers Per Side: 6. Number Of Carrier Rollers Per Side: 1. Ground Pressure: 5.1Psi. Max Travel Speed: 3.2Mph. Swing Speed: 9.5 Rpm. 2012 VOLVO ECR88 OROPS TRACK EXCAVATOR, 30′ BUCKET, FRONT AUX. HYDRAULICS, 24 TRACKS, 2 SPEED, CLEAN MACHINE AND READY TO WORK! THE ECR88 HAS BEEN BUILT LARGER AND HEAVIER THAN COMPETITOR PRODUCTS IN THE SAME CLASS TO ENSURE SUPERIOR PRODUCTIVITY AND PROFITABILITY. THE WIDER AND LONGER UNDERCARRIAGE PROVIDES EXCELLENT STABILITY AND LIFTING CAPACITY TOGETHER WITH FANTASTIC GROUND CLEARANCE AND WORKING RANGE. CALL WITH ANY QUESTIONS! Only 55 miles South East of Dallas. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in this country: US. This item can be shipped to United States.
4435 St Hwy 274. Options and Standard Features. Max Dig Depth: 10′3. Operating Weight: 7,468 LBS. Total Flow Of Main Pumps, Implement & Swing (Gpm): 26.7. Max Relief Valve Pressure (Psi): 3,553. Track Shoe Or Rubber Track Width (in): 11.8. Max Travel Speed (Mph): 2.9. Max Drawbar Pull (lbs): 7,658. Transport Length (ft/in): 15′ 10. Transport Height (ft/in): 7′ 11.6. Transport Width (ft/in): 5′ 9. Tail Overhang Over Side (in): 0. Arm (Stick) Length Used For Dimensions & Forces (ft/in): 4′ 4. Max Dig Depth (ft/in): 10′ 3. Max Depth Of Vertical Wall (ft/in): 7′ 0. Dump Height (ft/in): 11′ 0. Boom Swing, Right/Left (Deg): 55° / 75°. Bucket Digging Force (lbs): 6,968. Arm (Stick) Force (lbs): 4,859. Blade (Std, Opt, None): Std. Max Blade Width (ft/in): 5′ 9. Operating Weight (lbs): 7,468. THIS BOBCAT E35i ZTS COMPACT TRACK EXCAVATOR (MINI EXCAVATOR) MINIMIZES GROUND DISTURBANCE AND EXCELS AT BULK EXCAVATION TASKS. THE CONVENTIONAL TAIL SWING OFFERS IMPROVED DIG DEPTH AND REACH. IT’S ALSO EASIER TO MOVE THROUGH TIGHT SPACES SUCH AS DOORS, GATES, AND ONTO TRAILERS. Only 55 miles South East of Dallas. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in this country: US. This item can be shipped to United States.
4435 St Hwy 274. 2018 KUBOTA KX040-4 OROPS MINI COMPACT EXCAVATOR WITH FRONT AUXILIARY, 18 QUICK ATTACH BUCKET! Options and Standard Features. 18 Quick Attach Bucket. Operating Weight: 9900 Lbs. Dig Depth: 11′3′. Displacement: 111.4 Cu. Overall Length: 16′ 8. Overall Height: 8′ 2 W/ Canopy. Overall Width: 5′ 7. Minimum Ground Clearance: 13. Travel Speed – Low: 1.8 Mph. Travel Speed – High: 3.1 Mph. Crawler Length: 7′ 2. Shoe Width: 13.8. Ground Contact Pressure: 4.8 Psi. Unit Swing Speed: 9.2 Rpm. Boom Swing Angle – Left: 70 Degree. Boom Swing Angle – Right: 55 Degree. Blade Width: 5′ 7. Blade Height: 15.7. Blade Lift Above Ground: 16.5. Blade Drop Below Ground: 15.9. Blade Swing Angle: 25 Degree. Digging Depth – Vertical: 7′. Digging Height: 17′ 6. Digging Radius: 18′ 2. Turning Radius – Tail: 4′ 3. Turning Radius – With Swing: 5′ 11. Turning Radius – Without Swing: 7′ 1. Pump Capacity: 24.4Gpm. Auxiliary Hydraulic Flow: 17.2Gmp. MACHINE VIDEO UPON REQUEST! Only 55 miles South East of Dallas. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in this country: US. This item can be shipped to United States.