This is a brand new exhaust and gasket (993/66200+813/00349) to fit various JCB models. You will need to check suitability by providing us with your machine serial number so we can check that we are providing you with the correct part. We also offer fully reconditioned parts such as. Transmissions (syncro’s and powershifts). We also break machines to offer good used parts at competitive prices. Parts supplied per below terms and conditions. 1 Parts supplied according to JCB part numbers mentioned in the listing. Making sure your supplied with the correct part can also be helped by you giving us your machines serial number. 3 OEM part numbers mentioned on listings are for reference only, We do not imply that any part is a product of these manufactures. We accept the following. The item “JCB EXHAUST 993/66200 + GASKET 813/00349 3CX” is in sale since Friday, May 29, 2020. This item is in the category “Business, Office & Industrial\Industrial Tools\Construction Tools\Excavators”. The seller is “vicaryplantsparesukltd” and is located in North Kilworth. This item can be shipped worldwide.
4435 St Hwy 274. 2013 CAT 304E CR MINI TRACK EXCAVATOR WITH STRAIGHT BLADE, 18 PIN ON TOOTH BUCKET, AUTO IDLE, 2 SPEED HST, AND FRONT AUX! Options and Standard Features. Straight Blade W/ No Float. 18 Pin On Tooth Bucket. Gross Power: 41.8 Hp. Operating Weight: 8996.0 Lb. Dig Depth: 123.0 In. Engine Model: Cat® C2.4. Net Power: 40.2 Hp. Bore: 3.4 In. Stroke: 4.0 In. Displacement: 146.0 In3. Vertical Wall: 95.0 In. Maximum Reach At Ground Level: 206.0 In. Maximum Reach: 211.0 In. Maximum Dig Height: 196.0 In. Maximum Dump Clearance: 141.0 In. Boom In Reach: 83.0 In. Tail Swing: 38.0 In. Maximum Blade Height: 16.0 In. Maximum Blade Depth: 19.0 In. Swing Bearing Height: 22.0 In. O/A Undercarriage Length: 87.0 In. Boom Swing Right: 29.0 In. Boom Swing Left: 26.0 In. Track Belt/Shoe Width: 14.0 In. O/A Track Width: 77.0 In. Weight Canopy, Standard Stick: 8655.0 Lb. Travel Speed High: 3.2 Mph. Travel Speed Low: 2.1 Mph. Maximum Traction Force High Speed: 3799.0 Lb. Maximum Traction Force Low Speed: 6969.0 Lb. Ground Pressure Canopy: 4.1 Psi. Pump Flow At 2,200 Rpm: 26.4 Gal/Min. Operating Pressure Equipment: 3553.0 Psi. Operating Pressure Travel: 3553.0 Psi. Operating Pressure Swing: 3132.0 Psi. Auxiliary Circuit Primary (186 Bar/2,734 Psi): 18.5 Gal/Min. Auxiliary Circuit Secondary (174 Bar/2,524 Psi): 6.6 Gal/Min. Digging Force Stick (Standard): 4856.0 Lb. Digging Force Stick (Long): 4384.0 Lb. Digging Force Bucket: 8498.0 Lb. Type: Load Sensing Hydraulics With Variable Displacement Piston Pump. Machine Swing Speed: 10.0 Rpm. Boom Swing Left (Without Stop): 70°. Boom Swing Left (With Stop): 55°. Boom Swing Right: 50°. Width: 76.8 In. Height: 12.8 In. Dig Depth: 18.5 In. Lift Height: 15.7 In. Cooling System: 1.5 Gal. Engine Oil: 2.5 Gal. Hydraulic Tank: 11.2 Gal. Fuel Tank: 12.2 Gal. Stick Length Standard: 52.0 In. Stick Length Long: 64.0 In. Machine Overhang: 0.0 In. Number Of Carrier Rollers: 1. Number Of Track Rollers: 4. Track Roller Type: Center Flange. CAT 304E CR MINI TRACK EXCAVATOR IS THE ALL-AROUND MACHINE FROM TOUGH CONSTRUCTION TO WORKING AROUND THE HOME, FARM OR RANCH. WITH 6.4 FT WIDTH AND A DIGGING DEPTH OF 10.3 FT YOU CAN FIT AND DIG ALMOST ANYWHERE. THIS MACHINE IS SMALL ENOUGH TO HAUL EASILY WITH A LIGHT TRAILER TO THE NEXT PROJECT YET POWERFUL ENOUGH TO GET THE JOB DONE! MACHINE VIDEO UPON REQUEST! Only 55 miles South East of Dallas. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. The item “2013 CAT 304E CR MINI TRACK EXCAVATOR WITH STRAIGHT BLADE” is in sale since Wednesday, June 16, 2021. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in Trinidad, Texas. This item can’t be shipped, the buyer must pick up the item.
Spring loaded Quick Couplor to suit 14000lb to 16000lb excavators in very good condition. Couplor comes complete with one set of 45mm bucket pins. We supply both new and used quick couplers both hydraulic and manual for all size excavators. The item “Quick Couplor” is in sale since Tuesday, October 29, 2019. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “jokerr_5868″ and is located in Lemont, Illinois. This item can’t be shipped, the buyer must pick up the item.
Komatsu PC28UU Mini Excavator. Arriving August 16, 2021. Perfect for my application. Larry from Ocean Isle, NC (lduckett2009). Everything was as told. Started rite up and I luv it, I’d do it again. Rowenna from Bunch, OK (cuypers007). Curtis from Ellensburg, WA (bullroad50). “Refurbished machine in very good condition”. Rick from Mount Olive, AL (risore-29). Charles from Eagle, ID (chris74charles). Serial #: 2231. Track: Rubber (used). Year Built: 1988. Hour Meter: 3,522. Weight: 2,980 Kg (6,571 lbs). Swing Speed: 9.5 rpm. Travel Speed: 2.0 kmh (1.2 mph). Max Digging Height (a): 4,800 mm (15′9). Max Ground Reach (f): 4,130 mm (13′7). Max Digging Depth (c): 2,700 mm (8′10). Backfill Blade Width: 1,450 mm (4′9). Backfill Blade Height: 350 mm (1′2). Bucket Width: 420 mm (1′5). Tooth Width: 300 mm (1′0). Track Width: 300 mm (1′0). Track Length: 1,950 mm (6′5). Serial #: 03671. Displacement: 1.232 L 75.2 cu. Tail Swing Radius: 790 mm (2′7). Track Gauge: 1,150 mm (3′9). Machine Upper Width: 1,495 mm (4′11). Rear End Radius: 955 mm (3′2). Bucket Offset LH: 540 mm (1′9). Bucket Offset RH: 540 mm (1′9). Overall Length: 3,790 mm (12′5). Overall Width: 1,495 mm (4′11). Overall Height: 2,380 mm (7′10). Operation & maintenance manual. Shop & service manual. Excavator & engine part manual. 222 N PCH, Suite 675. El Segundo, CA 90245. Approval within 48 Hours. When you finance your equipment with Taycor Financial, your cash isn’t tied up in the equipment. Instead, it’s free for other investments that will grow your business, produce income, and ensure the equipment you acquire earns profits. Please send us a message for application link. Tomorrow can bring many opportunities. Financing equipment with Taycor Financial means you’ll have the credit available either from the bank or other sources to take advantage of future opportunities. Dollars paid later in the term usually have less purchasing power than those paid at the beginning of the term… So you pay for today’s equipment needs with tomorrow’s lower-value dollars. So you can rest easy knowing that these associated costs won’t disrupt your cash flow. Additional equipment can easily be added to your existing loan or lease. Or, if you’re trying to stay ahead of the competition by staying ahead of technologies, the equity in your financed equipment can be applied toward the loan or lease of new equipment. These options solve the problems of obsolescence – and make your job easier. With Taycor Financial, you have no compensating balances, no closing costs, and no blanket liens or other restrictive covenants that banks use to increase customers’ cost. What you see is what you get. Taycor Financial’s standard rates are highly competitive. Taycor Financial works for you. You choose the type of loan or lease that best fits your needs, and you select the length of the loan or lease term. Welcome to our store! You are in the right place if you are looking for Japanese rebuilt compact (mini) excavators! All of our equipment are securely stored at our contracted yard in Long Beach, CA 90813. New way to kick the tires! More than 95% of our customers have bought our excavators sight unseen. All of our machines are individually captured with (36) high-resolution photos and one 4-minute demonstration video. We guarantee that “what you see is what you get” since we never recycle photography and videography across our listings. We have also invested much efforts in researching original manufacturers’ equipment specifications working range, engine details, dimensions… So you do not have to. Our sales system will also automatically send you a standard commercial invoice for your review and signature (via DocuSign). We highly recommend All-ways Trucking from Medford, Oregon since more than 98% of our customers have used and enjoyed their service. When your truck driver checks in at our yard, our team will assist with complimentary equipment loading. Your machine is now en route to your address! Hesitation due to fear of part availability? The truth might surprise you! Most of our equipment are provided with part (excavator & engine) manuals at no extra charge. Depending on equipment make & model, we will provide you with complimentary service & repair manual as well as operation & maintenance manual. For part sourcing, we can refer the best domestic companies to source both OEM and aftermarket parts at competitive pricing to address your need. Please do not hesitate to reach out to our team if you have additional questions or concerns. Hours listed are as the hour meter reads at the time this listing was posted. Year built as listed is a general approximation, and can be plus or minus three years. Photos and video take priority if there are discrepancies within this listing. Weights, dimensions, features, specifications, resource links and all other information are provided as general guidance, are approximate, and may vary from year to year, model to model and equipment to equipment. NGO Company (or Ngo Agricultural Equipment Importer, LLC) makes NO guarantees of any information including, but not limited to, equipment year built, actual meter hours, engine rated horse power, safety or regulatory compliance, weights & measurements, specifications and operational condition. Equipment details and related information are limited to sight, sound, feel, limited operational running and testing at low speeds, in a confined flat area, without load, and in limited operating conditions. The item “Komatsu PC28UU Mini Excavator SN 2231″ is in sale since Thursday, July 1, 2021. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “ngo_excavators” and is located in Long Beach, California. This item can’t be shipped, the buyer must pick up the item.
Welcome to Kurtz Trading LLC! Options and Standard Features. Thank you for your interest in our equipment. Kurtz Trading strives to offer quality used equipment at reasonable prices. We thoroughly inspect all of our equipment to ensure all functions operate as they should, all fluids are at the proper levels, and that there are no major mechanical issues. We operate the equipment for 20-30 minutes to ensure the equipment operates properly under a load. Used equipment conditions vary, so we strongly advise you communicate directly with us about the item you are interested in. This allows us the opportunity to describe the equipment in detail, answer any questions you have, and ensure you are getting what you expect. We provide pictures and a video for each item, but will be happy to provide any additional photos you may need. Equipment That is Coming In Soon! Once the item arrives and has been inspected by our shop we will post pictures and a video. We will be able to answer most questions about the item, but cannot guaranty details until we have received and inspected the item. All of our attachments are tested to ensure their functionality and overall condition. We encourage you to call and confirm the attachments compatibility to your specific equipment. We provide pictures and, if applicable, a video for each attachment, but will be happy to provide any additional photos you may need. Beginning January 1st, 2020. Due to the South Dakota v. IL, IN, KY, MA, MD, MI, NC. NJ, OH, PA, SC, VA, WV. 8-5 Monday thru Friday! The item “2007 Kubota U25 Hydraulic Mini Excavator with 3rd Valve & Backfill Blade CHEAP” is in sale since Tuesday, June 22, 2021. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “kurtztrading” and is located in Littlestown, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.
KOMATSU PC20-7 EXCAVATOR #0617. 16 Tooth Front Bucket. Weight of Machine Approx. Store to see more of our inventory! Dont see what you are looking for? We have over 3000 attachments in stock! If you would like to view the machine or attachment in person you are welcome to. The majority of our inventory is located at. 8125 Grant Ave Rd. We only accept bank wire transfers. Then we will accept cash (in person), and credit cards (in person only for items under 3k with proper ID only). Attachments may need to be modified to fit your specific machine at your expense. All information is deemed reliable but not guaranteed. Year model listed is a general approximation and can be plus or minus five years; we do not guarantee specific years. Machines may need basic maintenance and/or repair before use. All advertised prices reflect a 3% cash discount. May have faded worn, pealing, chipped, or scratched paint. This is from being moved around our yard and being out in the sun. Are in used condition with faded, worn, pealing, chipped, or scratched paint, they may have dents and dings, and broken glass. All Machines are in fair condition only and will need basic maintenance, service and or repair before use. May have broken or missing parts. Certain functions such as lights, heat, AC, gauges, etc. May not be in working and in need of repair. Carroll Equipment is a family owned company and we have been in business for over 40 years! We also have one of the largest varieties of attachments for excavators, skid steers, and tractors in the Northeast. We work with a variety of companies to get you financed. All prices reflect a 3% cash discount. We accept wire transfers, cash (in person only), and credit cards (in person only on small items only under 3k with proper ID). All funds must clear before any item leaves our yard. Carroll Equipment, 8125 Grant Ave Rd. These must be properly filled out and signed by a company officer. All heavy equipment and attachments ships on dock-high flatbed or van style tractor trailers and you need the ability to unload. If no dock or forklift is available for unloading, we recommend using a local towing service with their rollback truck to assist in safe, fast, unloading. Our yard is located at: Carroll Equipment 8125 Grant Ave Rd Weedsport New York 13166. Hours stated are the hours that are currently showing on the hour meter. We cannot guarantee machine hours since it is secondhand equipment. We are not responsible for errors and omissions. We will help load your truck or trailer. We do NOT load containers. We will store your equipment outside. We will not be held responsible for any damage or mechanical issues related to storing your equipment. After 60 days your equipment will be considered abandoned. Equipment is used with average wear and described the best to our ability. All sales are final. Excavator Attachments, Backhoe Attachments, Skid Steer Attachments, Tractor 3 Pt Hitch Attachments and More. The item “Used Komatsu PC20-7 Excavator Diesel Cab Heat Rubber Tracks Pilot Controls” is in sale since Friday, June 25, 2021. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “fatherbillautos” and is located in Weedsport, New York. This item can be shipped to United States.
W e have a used Kobelco SK150LC Mark IV up for sale. The machine is powered by a 4-cyl. The engine starts easy. The hydraulic system works as it should. The machine has a hydraulic thumb. This machine was a local machine that was being upgraded to something newer. Nice clean original excavator. The machine is 8′6 wide. Please view the youtube video below. Since all items I sell are used it is very hard to guarantee anything. So all sales are as-is, where-is. I do my very best to fully describe all areas on the item including the good, the bad, and the ugly. I will make time to meet with whoever wants to come and view the equipment. I have a local third party heavy equipment repair company that is not associated with Elk Forest Farms, Inc. That can be hired by you to come and give you their representation of the item if you are too far away to come and inspect. Please contact me for further details on that service. I have a 36 loading dock here for your convenience. To make an appointment to inspect the item. Thank you for understanding. For trucking quotes you can contact me also. Thanks for looking and have a nice day! The item “1999 Kobelco SK150LC Mark IV Hydraulic Excavator Hydraulics Thumb 8′6″ is in sale since Saturday, July 17, 2021. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “elk_forest_farms” and is located in Sloansville, New York. This item can’t be shipped, the buyer must pick up the item.
2003 deere 35c Zts. Runs and operates as it should. Undercarriage has had every roller replaced within the last year. New track two years ago. Has a deere hydraulic thumb. All interior functions work. Isuzu 3 cylinder engine. Machine has been in the family since new. But i have reason to believe that is not correct. I think it is around 3500. Balance due within 5 days afterward. Machine is for sale locally as well. No the trailer is not included. The item “Deere 35c Zts” is in sale since Monday, July 19, 2021. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “matacemat” and is located in Chardon, Ohio. This item can’t be shipped, the buyer must pick up the item.