Excavators

FOR 2 WHEEL 360 SLEW MINI DIGGER. Powerfab 007 Mini Excavator Digger Backhoe Hydraulic – YouTube. Video will open in a new window. We currently manufacture in the UK and sell there and throughout Europe. We have had a lot of interest in Australia and are seeking distributors. This two wheeled mini excavator has 360 degree slew, digging over its wheels means it can use its anchors to hold itself and utilise a tearout force of 1 tonne solving tough digging, trenching and excavating problems. Accessing remote locations and narrow gaps it is only 30 wide and as it weighs 550 lbs it can be towed over rough terrain by a quad bike or 4WD with ease. It can also be towed on road. The 2 wheel version when on site uses its hydraulic excavating arm to pull itself forward, backwards or side to side. As it is 360 degree it can then dig over its wheels and utilise the rear spades as anchors resulting in a very good tearout force. It is ideal for homeowners, farmers, landscapers, plumbers and contractors. The APPROXIMATE specification is a 1 tonne digging force, 4′11 digging depth and dumping height, 360 degree slew, 9hp petrol engine or option for diesel, Width 30. For a small charge the specification can be changed to suit your application. You can see in the photographs machines that we have manufactured in the UK, a deep dig 7ft version is also available. You can see from pictures that you can sell by attending agricultural shows. The item “Distributor wanted for 360 Mini Excavator Digger Loader Kanga Dingo Kubota” is in sale since Monday, October 24, 2016. This item is in the category “Industrial\Heavy Machinery\Excavators”. The seller is “power-fab” and is located in Swansea. This item can be shipped worldwide.

• Make: POWERFAB
• Excavator Type: Mini Excavator

You’re viewing a 2004 CAT 304 CR Mini Excavator (Stock #01986). This unit has a 44 HP motor, EROPS, a hydraulic thumb, and heat inside the cab. We have 6 mini excavators in stock. MAX CUTTING HEIGHT 17.3 ft in 5280 mm. MAX LOADING HEIGHT 12.1 ft in 3690 mm. MAX REACH ALONG GROUND 17.9 ft in 5460 mm. MAX VERTICAL WALL DIGGING DEPTH 8 ft in 2440 mm. MAX DIGGING DEPTH 10.8 ft in 3300 mm. WIDTH TO OUTSIDE OF TRACKS 6.5 ft in 1980 mm. LENGTH OF TRACK ON GROUND 8.5 ft in 2580 mm. GROUND CLEARANCE 1.1 ft in 340 mm. HEIGHT TO TOP OF CAB 8.3 ft in 2550 mm. TAIL SWING RADIUS 3.5 ft in 1070 mm. COUNTERWEIGHT CLEARANCE 2 ft in 615 mm. TRACK GAUGE 5.2 ft in 1580 mm. SHOE SIZE 16 in 400 mm. GROSS POWER 43.8 hp 32.7 kw. NET POWER 42.2 hp 31.5 kw. DISPLACEMENT 153 cu in 2505 L. OPERATING WEIGHT 10844 lb 4920 kg. FUEL CAPACITY 19 gal 72 L. COOLING SYSTEM FLUID CAPACITY 2.9 gal 11 L. HYDRAUILC SYSTEM FLUID CAPACITY 20.6 gal 78 L. ENGINE OIL CAPACITY 1.9 gal 7 L. ALTERNATOR SUPPLIED AMPERAGE 50 amps. HYDRAULIC SYSTEM RELIEF VALVE PRESSURE 3553 psi 24500 kPa. HYDRAULIC PUMP FLOW CAPACITY 31.4 gal/min 119 L/min. The item “2004 CAT 304 CR Mini Excavator” is in sale since Tuesday, April 10, 2018. This item is in the category “Business & Industrial\Heavy Equipment\Excavators”. The seller is “cassonetrailerco” and is located in Ronkonkoma, New York. This item can’t be shipped, the buyer must pick up the item.

• Excavator Type: Mini Excavator
• Make: CAT
• Model Year: 2004
• Operating Weight: 10,001 – 11,000 lbs
• Net Horsepower (HP): 41 – 50
• Model: 304 CR
• Hours: 4,976

WE SELL ALL TYPES OF HEAVY EQUIPMENT. This machine starts right up and runs great. Please view the video above to see machine in action. We do our best to go over each machine we sell. If we notice there is something wrong with the machine, we will list it in the description. Our knowledgable staff can help you with all of your equipment needs. Third Party Inspection – There are multiple companies that we can recommend to come and do a full inspection on any machine that you are interested in inspecting. We will load onto any open trailer for free. We work with Direct Capital for all our customers financing needs. Direct Capital specializes in heavy equipment finance – they have some of the best rates in the industry! On location unless otherwise stated. Equipment descriptions are intended as a guide. CONDITIONS : There are no warranties which extend beyond the description in quotation. Quotation is subject to change without notice.. All Specs and information are subject to buyers inspection. INSPECTIONS : Inspections are available Monday – Thursday 7:30am – 3pm or Fridays 7:30am – 12pm by appointment only. With an ongoing commitment and dedication to our customers, we’ve earned the trust, business, and loyalty of some of the finest markets in the construction industry. Inventory includes a variety of forklifts, skid steers, backhoes, excavators, aerial lifts, wheel loaders, trenchers, cable plows, dozers, cranes, heaters, air compressors, dumpers, metal working machinery, stump grinders, attachments, trucks, trailers, and more. FORKLIFTS – CRANES – SKID STEERS – BACKHOES – WHEEL LOADERS – AERIAL LIFTS – TELESCOPIC FORKLIFTS. EXCAVATORS -TRENCHERS – TRUCKS & TRAILERS – INDUSTRIAL MACHINERY & MUCH MORE. WE HAVE OVER 200 MACHINES IN STOCK PACKAGE PRICING. The item “Hitachi Zaxis 50U-NA Mini Midi Excavator Enclosed Cab Dozer Blade” is in sale since Friday, May 11, 2018. This item is in the category “Business & Industrial\Heavy Equipment\Excavators”. The seller is “equipseller” and is located in Essington, Pennsylvania. This item can be shipped to United States.

• Model: 50U-NA
• Make: Hitachi
• Hours: 4241
• Serial Number: HCM1LI400E241221
• Excavator Type: Mini Excavator

For sale is a cat 307. This machine runs and operates as it should. There are 4889 hrs on the machine. This machine is ready to be worked. Please call me with any questions at 5706478845. I do not except pay pal. The item “Cat 307 Excavator” is in sale since Sunday, June 17, 2018. This item is in the category “Business & Industrial\Heavy Equipment\Excavators”. The seller is “shoes8845″ and is located in Prompton, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.

• Make: CAT
• Hours: 4878
• Model: 307
• Operating Weight: 17,001 – 18,000 lbs
• Excavator Type: Hydraulic Excavator

4435 St Hwy 274. CATERPILLAR 303C CR CAB (AC & HEAT) MINI TRACK EXCAVATOR, AUX. Options and Standard Features. Model: 303C CR CAB MINI TRACK EXCAVATOR. Net Horsepower (HP): 30. Operating Weight: 7,835 Lbs. Net Power 30.0 Hp. Gross Power 31.0 Hp. Operating Weight With Cab 7835.0 Lb. Max Digging Depth – Standard Stick 9.6 Ft. Max Reach Ground Level – Standard Stick 16.8 Ft. Height Over Cab 8.2 Ft. Length To Center Of Rollers 16.73 Ft. Max Cutting Height – Standard Stick 16.24 Ft. Max Dump Height – Standard Stick 11.45 Ft. Max Horizontal Reach – Long Stick 17.55 Ft. Max Horizontal Reach – Standard Stick 16.73 Ft. Max Vertical Dig Depth – Standard Stick 7.1 Ft. Swing Radius – Rear 2.92 Ft. Track Gauge 4.1 Ft. Track Shoe Width 0.98 Ft. Transport Width 5.09 Ft. Width Over Track 5.09 Ft. Gradeability (Max) – High 30.0 Degrees. Max Traction Force – High Speed 3979.0 Lb. Max Traction Force – Low Speed 7508.0 Lb. Travel Speed – High 2.9 Mph. Travel Speed – Low 1.6 Mph. Operating Pressure – Equipment 3553.0 Psi. Digging Forces – Stick (Standard) 4249.0 Lb. Digging Force – Stick (Long) 3799.0 Lb. Digging Force – Bucket 7419.0 Lb. Operating Pressure – Travel 3553.0 Psi. Operating Pressure – Swing 2495.0 Psi. Auxiliary Circuit – Primary (245 Bar, 3550 Psi) 15.9 Gal/Min. Auxiliary Circuits – Secondary – At 174 Bar. Machine Swing Speed 9.0 RPM. Boom Swing – Left (Without Stop) 80.0 Degrees. Boom Swing – Left (With Stop) 55.0 Degrees. Boom Swing – Right 50.0 Degrees. Dig Depth 18.0 In. Lift Height 16.0 In. Cooling System 1.6 Gal. Engine Oil 1.6 Gal. Hydraulic Tank 9.8 Gal. Fuel Tank 11.9 Gal. Hydraulic System 17.2 Gal. This CAT 303EC CR Mini Track Excavator is the all around machine from tough construction to working around the home, farm or ranch. With 5.1 ft width and a digging depth of 9.6 ft you can fit and dig almost anywhere. Work in the comfort of a cab machine with AC and Heat. This machine is small enough to haul easily with a light trailer to the next project yet powerful enough to get the job done. This Track Excavator has been well maintained and is in good shape. This machine is plumbed with Aux. Hydraulics to run a thumb. Caterpillar mini-excavators at the top of the line machines in mini-excavators. This Track Excavator has been well maintained and is ready to go to work. DONT LET THIS MACHINE GET AWAY! Applying for a vehicle loan online is one of the quickest and easiest application methods. Our secure application is easy to complete, all you need are a few personal and employment details. Only 55 miles South East of Dallas. Check out similar vehicles in our inventory. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. Create Professional Listings Fast and Easy. The item “CATERPILLAR 303C CR CAB (AC & HEAT) MINI TRACK EXCAVATOR, AUX. HYDRAULICS, NICE” is in sale since Tuesday, June 12, 2018. This item is in the category “Business & Industrial\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in Trinidad, Texas. This item can be shipped worldwide.

• For Sale By: Dealer
• Hours: 0
• Make: Caterpillar
• Mileage: 0
• Model: 303C CR
• Year: 2010

Old Forge Power Equipment, Inc. Engine & Equipment Division. GOOD SOLID OLDER MACHINE, RUNS OUT WELL W/ GOOD DIGGING POWER. 73K lbs operating weight, 48 bucket w/ side cutters, enclosed cab. We will load any trailer. No storage will be charged for a period of up to 30 days. After 90 days property is considered abandoned and resold. Otherwise, no exceptions to this policy. Must be paid for within 5 days of sale. LOOKING FOR TRACTOR & EQUIPMENT PARTS?? OLD FORGE POWER EQUIPMENT PARTS & COMPONENTS. The item “Case 9050 Hydraulic Excavator RUNS MINT! Mitsubishi Diesel 35 Ton Machine” is in sale since Sunday, June 3, 2018. This item is in the category “Business & Industrial\Heavy Equipment\Excavators”. The seller is “oldforgepower” and is located in Carbondale, Pennsylvania. This item can be shipped to United States.

• Excavator Type: Hydraulic Excavator
• Make: Case
• Model: 9050
• Operating Weight: 73,001 – 74,000 lbs

UP FOR SALE IS THIS WELL MAINTAINED DIESEL 2012 YANMAR VIO80 MINI HYDRAULIC EXCAVATOR RUBBER TRACKS CAB DOZER BLADE, FULLY ENCLOSED CAB, AIR CONDITIONING AND HEAT, AUXILIARY VALVE AND PLUMBING, 89″ BACKFILL DOZER BLADE, HYDRAULIC QUICK COUPLER, 54.5 HP, MAX DIG DEPTH: 15′4″, REACH: 23′5, STICK LENGTH: 65″, BUCKET FORCE: 11,330 LBS, BUCKET SIZE: 24″, DUMP HEIGHT: 15′2. TRANSPORT DIMENSIONS: 258″ L X 91″ W X 109 H, TRANSPORT WEIGHT: 17,800 LBS. THIS MACHINE IS IN GOOD RUNNING AND OPERATING CONDITION. CONTACT ME FOR MORE DETAILS! The item “2012 YANMAR VIO 80 MINI HYDRAULIC EXCAVATOR RUBBER TRACKS ENCLOSED CAB” is in sale since Sunday, June 10, 2018. This item is in the category “Business & Industrial\Heavy Equipment\Excavators”. The seller is “ccmassey2011″ and is located in Troy, Illinois. This item can’t be shipped, the buyer must pick up the item.

• Model Year: 2012
• Make: Yanmar
• Excavator Type: Hydraulic Excavator
• Hours: 3169
• Model: VIO 80 MINI
• Bundle Listing: No
• MPN: Does Not Apply
• Serial Number: YMRVIO80EBYY91665
• Operating Weight: 17,001 – 18,000 lbs
• Max Dig Depth: 15′1” – 16′
• Country/Region of Manufacture: Japan
• Net Horsepower (HP): 51 – 60

Excellent condition very tight controls this machine has been taken care of since day one bought new and serviced at Rex Spencer equipment in South Kansas City 2700 hours you will not be disappointed in the machine. X minix excavator trackhoe hoe backhoe. The item “2008 Case CX50B 2700 hours mini Excavator” is in sale since Saturday, March 17, 2018. This item is in the category “Business & Industrial\Heavy Equipment\Excavators”. The seller is “coaltire” and is located in Clinton, Missouri. This item can’t be shipped, the buyer must pick up the item.

• Excavator Type: Mini Excavator
• Model Year: 2008
• Model: Cx50b
• Serial Number: 0
• Hours: 2700
• Country/Region of Manufacture: Unknown
• Operating Weight: 10,001 – 11,000 lbs
• Net Horsepower (HP): 31 – 40
• Make: Case