FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


FF INDUSTRIAL FF 13 Briggs&Stratton Rubber Tracks 3rd Aux Hydraulic Valve Thumb


#2092 FF INDUSTRIAL FF13 EXCAVATOR WITH CAB. #2092 FF Industrial FF13 Excavator with Cab. NEW, 16 tooth bucket. Two finger adjustable manual thumb. 3rd auxiliary hydraulic valve. 13.5hp Briggs and Stratton gas engine. Machine weighs approximately 2,000 lbs. Attachm ents may need to be modified to fit your machine. Please check your machine measurements first. Don’t see what you are looking for? We have over 3000 attachments in stock! If you would like to view the machine or attachment in person you are welcome to. The majority of our inventory is located at. 8125 Grant Ave Rd. We only accept bank wire transfers. Then we will accept cash (in person), and credit cards (in person only for items under 3k with proper ID only). Attachments may need to be modified to fit your specific machine at your expense. All information is deemed reliable but not guaranteed. Year model listed is a general approximation and can be plus or minus five years; we do not guarantee specific years. Machines may need basic maintenance and/or repair before use. May have faded worn, pealing, chipped, or scratched paint. This is from being moved around our yard and being out in the sun. Are in used condition with faded, worn, pealing, chipped, or scratched paint, they may have dents and dings, and broken glass. All Machines are in fair condition only and will need basic maintenance, service and or repair before use. May have broken or missing parts. Certain functions such as lights, heat, AC, gauges, etc. May not be in working and in need of repair. Carroll Equipment is a family-owned company and we have been in business for over 40 years! We also have one of the largest varieties of attachments for excavators, skid steers, and tractors in the Northeast. We work with a variety of companies to get you financed. We accept wire transfers, cash (in person only), and credit cards (in person only on small items only under 3k with proper ID). All prices reflect a 4% cash discount. All funds must clear before any item leaves our yard. Carroll Equipment, 8125 Grant Ave Rd. These must be properly filled out and signed by a company officer. If no dock or forklift is available for unloading, we recommend using a local towing service with their rollback truck to assist in safe, fast, unloading. Our yard is located at: Carroll Equipment 8125 Grant Ave Rd Weedsport New York 13166. Hours stated are the hours that are currently showing on the hour meter. We cannot guarantee machine hours since it is secondhand equipment. We are not responsible for errors and omissions. We will help load your truck or trailer. We do NOT load containers. We will store your equipment outside. We will not be held responsible for any damage or mechanical issues related to storing your equipment. After 60 days your equipment will be considered abandoned. Equipment is used with average wear and described the best to our ability. All sales are final. Excavator Attachments, Backhoe Attachments, Skid Steer Attachments, Tractor 3 Pt Hitch Attachments and More.

Tags Tags: , , , , , ,
Categories: Uncategorized
Posted By: admin
Last Edit: 23 May 2024 @ 12 50 AM

EmailPermalinkComments Off
FREE SHIPPING NEW Mini Excavator + HYDRAULIC THUMB Briggs & Stratton Engine


FREE SHIPPING NEW Mini Excavator + HYDRAULIC THUMB Briggs & Stratton Engine


FREE SHIPPING NEW Mini Excavator + HYDRAULIC THUMB Briggs & Stratton Engine


FREE SHIPPING NEW Mini Excavator + HYDRAULIC THUMB Briggs & Stratton Engine


FREE SHIPPING NEW Mini Excavator + HYDRAULIC THUMB Briggs & Stratton Engine


FREE SHIPPING NEW Mini Excavator + HYDRAULIC THUMB Briggs & Stratton Engine


FREE SHIPPING NEW Mini Excavator + HYDRAULIC THUMB Briggs & Stratton Engine


FREE SHIPPING NEW Mini Excavator + HYDRAULIC THUMB Briggs & Stratton Engine


FREE SHIPPING NEW Mini Excavator + HYDRAULIC THUMB Briggs & Stratton Engine


FREE SHIPPING NEW Mini Excavator + HYDRAULIC THUMB Briggs & Stratton Engine


FREE SHIPPING NEW Mini Excavator + HYDRAULIC THUMB Briggs & Stratton Engine


FREE SHIPPING NEW Mini Excavator + HYDRAULIC THUMB Briggs & Stratton Engine


FREE SHIPPING NEW Mini Excavator + HYDRAULIC THUMB Briggs & Stratton Engine


FREE SHIPPING NEW Mini Excavator + HYDRAULIC THUMB Briggs & Stratton Engine


FREE SHIPPING NEW Mini Excavator + HYDRAULIC THUMB Briggs & Stratton Engine


DRIVERS DO NOT ASSIST IN UNLOADING. BUYERS MUST HAVE ARRANGMENTS TO UNLOAD. These are VERY strong little units. Gas unit, EPA certified 13.5 HP Briggs Hydraulic Thumb. Max digging depth 1600mm (5.24 ft). Overall size of unit: 25509501350 mm (8.363.124.4). Operating weight: 2000 Lbs.

Tags Tags: , , , , , , , ,
Categories: Uncategorized
Posted By: admin
Last Edit: 14 May 2024 @ 07 47 AM

EmailPermalinkComments Off
Crawler Type Mini Excavator with Mechanical Thumb Free B$S EPA Engine


Crawler Type Mini Excavator with Mechanical Thumb Free B$S EPA Engine


Crawler Type Mini Excavator with Mechanical Thumb Free B$S EPA Engine


Crawler Type Mini Excavator with Mechanical Thumb Free B$S EPA Engine


Crawler Type Mini Excavator with Mechanical Thumb Free B$S EPA Engine


Crawler Type Mini Excavator with Mechanical Thumb Free B$S EPA Engine


Crawler Type Mini Excavator with Mechanical Thumb Free B$S EPA Engine


Crawler Type Mini Excavator with Mechanical Thumb Free B$S EPA Engine


This Crawler Excavator is designed for small works, small projects, in garden, farmland, municipal works, vegetable greenhouse, digging trench It is with small engine, simple design, easy to maintain. Engine: Briggs & Stratton engine, 13.5hp. Hydraulic pump is easy to maintain, long service life. Rubber track no damage to cement, tile floor. Multiple valves under the operating handle, the benefit of less effort and improved control is in your hands. The digging depth of 65inch make this machine works good for lot small works. This mini excavator including thumb clip. Transit timevaries and depends on the carrier, we can not be held responsible for delays caused by carriers. Please take BOL while picking up the goods in our US warehouse. PLEASE NOTE THAT THE RECEIVER SHOULD RESPONSIBLE FOR THE EXPENSE OF UNLOADING. (Unless stated otherwise in the listing).

Tags Tags: , , , , , , ,
Categories: Uncategorized
Posted By: admin
Last Edit: 12 May 2024 @ 03 27 PM

EmailPermalinkComments Off
2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


2018' Kubota KX080-4S Excavator, Hyd Thumb, Hyd Angle Blade, Cab, 1,700 Hours


19,000# excavator class. Kubota Diesel Engine. Fuel type: Diesel. Hydraulic Angle Blade. 24 Digging bucket. 1,700 Original Hours. Machine still on Rent. Cleaned, Serviced, Inspected & Ready to Work! – Please call Shawn with any questions. Subject to local sale. Blue Diamond Machinery Sales, Inc. NO SUNDAY CALLS PLEASE!!! Please Call Shawn at Blue Diamond Machinery with questions. Serious inquiries only Please! All Prices are FOB and do not include optional tooling, hookup wiring, cribbing, manuals, etc, etc… Unless any of these items are specified in sale. All funds in US Dollars.

Tags Tags: , , , , , , ,
Categories: Uncategorized
Posted By: admin
Last Edit: 11 May 2024 @ 03 21 PM

EmailPermalinkComments Off

Tags Tags: , , , , , , , ,
Categories: turn
Posted By: admin
Last Edit: 09 May 2024 @ 07 02 AM

EmailPermalinkComments Off
AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


AGT 13.5HP Mini Excavator Digger Tracked Crawler Mechanical Thumb B&S Gas Engine


Our company is specialize in agricultural machinery, garden machinery, construction machinery, automotive and accessories. Hope you will have a wonderful time with us, thanks! Please also note that heavy goods will be delivered by truck, it may change to your local carrier if you’re in remote area. Transit time varies and depends on the carrier, we cannot be held responsible for delays caused by carriers. (Unless stated otherwise in the listing). We will give you a response in 24 hours. All emails will be responded to within 12-24hours. Light Equipment & Tools. Agrotk 13.5HP Mini Excavator B&S Engine Gas Digger Tracked. Crawler DM12-C w/Thumb Clamp. In addition, please confirm whether there is a forklift unloading capability before purchasing. If you are not sure, we will also provide solutions to help you. DM12-C excavator parameter table. Machine working weight (kg): 870. Bucket capacity (m³): 0.025. Walking speed low/high speed (Km/h): 0-2. Climbing ability (%): 30. Grounding specific pressure (Kpa): 32. Maximum digging radius (mm): 3080. Maximum digging depth (mm): 1764. Maximum digging height (mm): 2670. Maximum unloading height (mm): 1900. Main pump type/model: Gear pump/06. Main pump brand: Tianjin Walking. Rated set pressure (Mpa): 16. Maximum flow rate of main pump (L/min): 21.6. Multi-way valve: 8-link multi-way valve. Multi-way valve brand: North. Maximum set pressure (Mpa): 16. Travel hydraulic motor type: BM6-310. Travel motor brand: Liyuan. Rotary hydraulic motor type: BM2-250. Transport length (mm): 2260. Transport width (mm): 958. Transport height including ceiling (mm): 2200. Upper plate ground clearance (mm): 350. Bucket width (mm): 359. Bulldozing board width (mm): 907. Engine brand: Briggs & Stratton. Engine model: 13.5HP. Maximum horsepower (ps): 13.3. Maximum power (Kw): 9.8. Maximum speed (rpm): 3600. Number of cylinders: 1. Cooling method: air cooling. Engine oil replacement volume (L): 1.1. Theoretical fuel consumption (L/h): 0.5-1.2. Rubber (bandwidthpitchnumber of sections): 1807237. Steel (bandwidthpitchnumber of sections): 1807237. Fuel tank (L): 6.6. Hydraulic oil tank (L): 18. Tensioning form: mechanical tensioning. Thanks for your understanding. Please note that we have 3 brands TOPCAT, MOWER KING, AGROTK, products of these 3 brands are totally exactly the same. The carrier may changed to your local logistics if you’re in remote area. If you’re in a remote area, the carrier may be changed to your local logistics. We will do our effort to help you fix the problem. You may also like. View more great items.

Tags Tags: , , , , , , , ,
Categories: 135hp
Posted By: admin
Last Edit: 05 May 2024 @ 06 20 AM

EmailPermalinkComments Off
AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


AGT H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton


Agrotk H12 Mini Excavator Briggs & Stratton Gas Engine Mechanical Thumb 13.5HP 1Ton. Because the machine is too heavy, the lift gate service cannot be used. Before purchasing, please confirm whether there is a forklift or trailer unloading tool. Thank you for your cooperation. Engine:BRIGGS & STRATTON. Lift capacity: 100 kg. Machine working weight (kg): 860. Bucket capacity (m3):0.025. Walking speed low/high speed (K/h): 0-1.8. Climbing ability (%): 30. Rotary speed base (r/min):10. Bucket maximum digging force (KN): 6. Maximum digging force of bucket rod (KN): 4. Maximum excavation height (mm): 2550. Maximum unloading height (mm):1780. Maximum excavation depth (mm):1644. Maximum vertical excavation depth (mm): 2960. Maximum digging radius (mm):1422. Minimum radius of gyration mm minimum: 1330. Minimum turning radius of tail (mm): 800. Maximum lifting height of dozer blade: 140. Maximum digging height of bulldozer: 270. Side swing angle (left/right):/. Total length mm:2895. Overall width (mm):958. Total height (mm):2200. Dozer blade width/height (mm): 907/200. Maximum power (Kw):98. Maximum speed (rpm): 3600. Number of cylinders: 1. Cooling method: air cooling. Engine oil replacement volume (L): 1.1. Theoretical fuel consumption (L/h):/. Main pump type/model: gear pump/06. Main pump brand: Tianjin walking. Rated set pressure (Mp): 16. Maximum flow rate of main pump (L/min): 21.6. Multi-way valve: 8-link manual multi-way valve. Multi-way valve brand: North. Item set pressure (Mps): 16. Travel hydraulic motor type: BM6-310. Walking motor brand: Liyuan. Rotary hydraulic motor type: BM2-250. O-Glue removal (bandwidthpitch): 1807237. O-(bandwidth “pitch knot”): /. Remove the glue block: /. Bore stroke : Single cylinder, fan cool. Rated power : 8.2 kw/3600r/min. Main pump :Japan KDW5-6. Swing motor : ltaly JKRS-230. Traveling motor : ltaly JKM-225. Travel speed : 1.5km/h. Overall dimension(LxWxH) : 2775 x 930 x 2219 mm. Total length of track : 1230mm. Platform ground clearance : 380mm. Platform back turning radius : 784mm. Chassis ground clearance : 132mm. 500mm Digging Bucket with Teeth. Fits Chinese mini diggers and other branded machines 90mm centres. 90.5539.3782.68(IN). Logistics will not responsible for any unloading. The carrier may changed to your local logistics if you’re in remote area. If you’re in a remote area, the carrier may be changed to your local logistics. We will do our effort to help you fix the problem. Thanks for your understanding.

Tags Tags: , , , , , , , ,
Categories: Uncategorized
Posted By: admin
Last Edit: 03 May 2024 @ 06 06 AM

EmailPermalinkComments Off
Mini Excavator 2016 Case CX 17 B with Hydraulic Thumb


Mini Excavator 2016 Case CX 17 B with Hydraulic Thumb


Mini Excavator 2016 Case CX 17 B with Hydraulic Thumb


Mini Excavator 2016 Case CX 17 B with Hydraulic Thumb


Mini Excavator 2016 Case CX 17 B with Hydraulic Thumb


Mini Excavator 2016 Case CX 17 B with Hydraulic Thumb


Mini Excavator 2016 Case CX 17 B with Hydraulic Thumb


Mini Excavator 2016 Case CX 17 B with Hydraulic Thumb


Mini Excavator 2016 Case CX 17 B with Hydraulic Thumb


Mini Excavator 2016 Case CX 17 B with Hydraulic Thumb


Mini Excavator 2016 Case CX 17 B with Hydraulic Thumb


2016 Case Mini Excavator with Hydraulic Thumb. Low hours [2313 actual]. Dependable 58.1 cu in 3 cylinder Diesel. Operating weight 3638 lbs. Tracks adjust in and out. Tight, responsive and ready to go to work. No surprises and as you can see she is garage kept.

Tags Tags: , , , ,
Categories: Uncategorized
Posted By: admin
Last Edit: 30 Apr 2024 @ 01 40 PM

EmailPermalinkComments Off
Agrotk 1 Ton Mini Excavator Digger Tracked Cab RATO Gas Engine Thumb clip 13.5HP


Agrotk 1 Ton Mini Excavator Digger Tracked Cab RATO Gas Engine Thumb clip 13.5HP


Agrotk 1 Ton Mini Excavator Digger Tracked Cab RATO Gas Engine Thumb clip 13.5HP


Agrotk 1 Ton Mini Excavator Digger Tracked Cab RATO Gas Engine Thumb clip 13.5HP


Agrotk 1 Ton Mini Excavator Digger Tracked Cab RATO Gas Engine Thumb clip 13.5HP


Agrotk 1 Ton Mini Excavator Digger Tracked Cab RATO Gas Engine Thumb clip 13.5HP


Agrotk 1 Ton Mini Excavator Digger Tracked Cab RATO Gas Engine Thumb clip 13.5HP


Agrotk 1 Ton Mini Excavator Digger Tracked Cab RATO Gas Engine Thumb clip 13.5HP


Agrotk 1 Ton Mini Excavator Digger Tracked Cab RATO Gas Engine Thumb clip 13.5HP


Agrotk 1 Ton Mini Excavator Digger Tracked Cab RATO Gas Engine Thumb clip 13.5HP


Agrotk 1 Ton Mini Excavator Digger Tracked Cab RATO Gas Engine Thumb clip 13.5HP



Our company is specialize in agricultural machinery, garden machinery, construction machinery, automotive and accessories. Hope you will have a wonderful time with us, thanks! Please also note that heavy goods will be delivered by truck, it may change to your local carrier if you’re in remote area. Transit time varies and depends on the carrier, we cannot be held responsible for delays caused by carriers. (Unless stated otherwise in the listing). We will give you a response in 24 hours. All emails will be responded to within 12-24hours. Light Equipment & Tools. Agrotk 1 Ton Mini Excavator Digger Tracked Cab RATO Gas Engine Thumb clip 13.5HP. Before purchasing, please confirm whether you have a forklift or trailer unloading tool, thank you! Machine working weight (kg): 960. Bucket capacity (m3):0.03. Walking speed low/high speed (Km/h): 0-1.8. Climbing ability (%):15. Maximum excavation height :2560mm/100.78inch. Maximum unloading height : 1800mm/70.86inch. Maximum excavation depth :1693mm/66.65inch. Maximum digging radius: 3060mm/120.47inch. Side swing angle (left/right):/. Total length(mm):2925. Overall width (mm):958. Total height (mm): 2422. Dozer blade width/height (mm):907/400. Engine model: R420D 13.5. Maximum power (Kw):9.7. Maximum speed (rpm):3600. Number of cylinders: 1. Cooling method: air cooling. Engine oil replacement amount: 1.1. Theoretical fuel consumption (L/h): 0.5-1.2. Main pump type/model: gear pump/06. Main pump brand: Tianjin walking. Rated set pressure (Mpa): 16. Maximum flow rate of main pump (L/min): 21.6. Multi-way valve: 8 joint multi-way valve. Multi-way valve brand: Taiheng. Travel hydraulic motor type: BM6-315. Walking motor brand: Liwo. Rotary hydraulic motor type: BM2-315. O-rubber (bandwidth pitch number): 1807237. Tensioning form: mechanical tensioning. Fuel tank(L):6.6. Hydraulic tank(L):15. Thanks for your understanding. Please note that we have 3 brands TOPCAT, MOWER KING, AGROTK, products of these 3 brands are totally exactly the same. The carrier may changed to your local logistics if you’re in remote area. If you’re in a remote area, the carrier may be changed to your local logistics. We will do our effort to help you fix the problem. You may also like. View more great items.

Tags Tags: , , , , , , , , ,
Categories: Uncategorized
Posted By: admin
Last Edit: 27 Apr 2024 @ 09 11 PM

EmailPermalinkComments Off
2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88


2008 Komatsu PC88MR-8 Midi Excavator HYDRAULIC THUMB! Q/C PC88



2008 Komatsu PC88MR-8 hydraulic midi excavators, EROPS, heat, A/C, radio, manual Q/C, WB hydraulic thumb, GP digging bucket w/ teeth, double auxiliary hydraulic circuit, swing boom, rubber street pads over steel U/C, Komatsu SAA4D95 PRE EMISSIONS diesel engine, 8700 hours. ONE OWNER MACHINE — GOOD CLEAN RUNNING UNIT HERE FOR CHEAP — HAS ALL THE OPTIONS & ACCESSORIES — DON’T MISS IT!

Tags Tags: , , , , , ,
Categories: Uncategorized
Posted By: admin
Last Edit: 22 Apr 2024 @ 04 27 AM

EmailPermalinkComments Off
\/ More Options ...
Change Theme...
  • Users » 1
  • Posts/Pages » 10,082
  • Comments » 1
Change Theme...
  • VoidVoid « Default
  • LifeLife
  • EarthEarth
  • WindWind
  • WaterWater
  • FireFire
  • LightLight

Privacy Policy



    No Child Pages.

Terms Of Service



    No Child Pages.

Contact Us



    No Child Pages.