Whether you need a US or EU plug, we’ve got you covered! KAS Hashrate: 200GH/S(±10%). Hashrate: 200Gh/s±10% Consumption: 100W±10%. Weight About: 2.5kg.
2019 JCB 45Z-1 Mini Excavator – 9,879 lbs – 1007 Hours – Serviced – Ready 2 Work. Part of active rental fleet. This excavator does not have any known mechanical issues, runs strong, all functions working, and ready to work on your job site today. 1,007 hours on working meter. More pictures and videos available upon request. Thanks for looking! Powerful Tier-4-Final JCB Diesel by Kohler engine that requires no DPF. Enhanced Safety: The powerful JCB 45Z-1 features a wide track frame and low center of gravity, for exceptional stability. Coupled with improved visibility over earlier models, and numerous other safety enhancements, the 45Z-1 provides easier and safer trench digging and maneuvering capabilities. The JCB Safety Lever Lock fully isolates the hydraulic functions, to prevent unintended movement. Furthermore, the unique JCB 2GO system requires two separate inputs, to ensure the hydraulics can only be operated in a safe lockable position. The optional Safe Lift feature, complete with an integral lift overload warning system, is an industry first in this class. Safe Lift incorporates a green-amber-red graphic in the monitor panel, with an audible warning that sounds if the machine approaches overload. Durable Performance: The 45Z-1 shares the durable design proven on the larger machines in JCB’s next-generation compact excavator range, with 100 percent steel bodywork and sturdy four-plate dipper construction. The dig end uses 100 percent graphite-impregnated bushings, leading to extended 500-hour greasing intervals. Revised bucket pin pick-up points allow the machine to work with a number of competitive bucket brands, while optional hydraulic or manual quick hitches can be specified for faster attachment changeover. The 45Z-1 compact excavator features a new dig end, with a longer main boom and shorter dipper arm than the previous 8045 ZTS, to provide a dump height of 13 feet 1 inch (4 m), for easier truck and site dumper loading. The upgraded hydraulic system also delivers up to 8,542 lb (38 kN) bucket breakout force and dipper breakout of 4,945 lb (22 kN), boosting performance and productivity. Improved Efficiency: With class-leading greasing intervals of 500 hours and machine diagnostic status reports delivered via the new, in-cab monitor, JCB excavators streamline maintenance requirements and reduce machine downtime. Fuel consumption is minimized by several smart features. For example, engine speed is automatically reduced when the operator’s armrest is raised. Additionally, a’one-touch’ idle feature, and programmable auto-idle, enable dramatic fuel reductions with minimal input necessary from the operator. Four power bands-Light, Eco, Heavy, and Heavy Plus-allow the engine speed to be matched to the hydraulic flow requirements for the attachment and application at hand. A patented low-pressure return line circuit further improves fuel efficiency by eliminating the need to for the pump to overcome high pressure on start-up. Load-sensing hydraulics are standard-fit equipment on the 45Z-1, limiting the consumption of power by the hydraulic system to when it is needed most. Livelink: A key feature of JCB’s LiveLink telematics system is the immobilizer with remote pin code management system, which allows a fleet manager to remotely authorize or deny usage of a machine. Up to 14 individual pin codes can be programmed into the system, allowing custom operator preferences to be programmed into the machine, and hydraulic flow settings for specific attachments can be set, adjusted and stored. Machine service and diagnostics information, along with alerts and service interval countdowns, support efficient maintenance scheduling. Purpose-built to be the largest rental-ready compact excavator that can be towed without a commercial driver’s license (subject to local regulations). 100 percent steel body work. Zero tail swing. Easy Servicing: Graphite-impregnated bronze bushes on the dig end allow the JCB 45Z-1 compact excavator to offer best-in-class 500-hour greasing intervals. An open frame undercarriage, with sloping track legs, makes cleaning easier. Color-coded hydraulic hoses make for easy identification, and the dozer hoses terminate at the bulkhead, making them easy to replace when needed. The 45Z-1 is fueled from ground level via a wide-opening steel bonnet and external fuel indicator. An optional refueling pump with auto stop reduces spillages for improved safety. The cab floor is easily removed, to inspect or replace the main control valve spools, hydraulic connections and other components. Structural Strength: The 45Z-1 shares the durable design proven on the larger machines in JCB’s next-generation compact excavator range, with 100 percent steel bodywork and sturdy four-plate dipper construction. The fully robot-welded boom and dipper are made of high tensile steel, with internal baffle plates in the boom for enhanced durability. A heavy-duty boom cylinder guard and optional dipper and crowd ram guards provide maximum protection for the excavator arm. An optional heavy-duty kingpost features durable re-bushable pivots to optimize service life and provides enclosed routing for hydraulic hoses. O-Ring Face Seal (ORFS) hydraulic fittings, provide excellent, leak-free sealing capabilities. JCB relies upon trusted industry names for critical components, including Kohler engines, Nachi and Bosch-Rexroth hydraulic components, and Bridgestone tracks. Variable geometry hitch for diverse attachment compatibilit. No-frills, rental-ready specification for optimal cost and weight savings. Graphite bushes for 500-hour greasing intervals on dig-end pivot points. Operator Comfort And Control: JCB compact excavators deliver impressive levels of comfort for the operator, with reduced noise and vibration levels. The advanced display screen and control system, with an automotive-style rotary controller, allows easy access to a host of systems and information. The operator can set auxiliary hydraulic flows for two separate attachments, while the menu mode button switches the rotary controller between throttle modes, including a one-touch idle function and menu mode. The 45Z-1 is also offered with a new membrane switch panel to control auxiliary flow settings, working lights, beacon, wipers and JCB’s 2Go hydraulic activation safety system. Productivity has been further enhanced with the adoption of an electro-hydraulic dozer control lever, with up to two buttons in the head to control two-speed tracking and dozer float. Separate buttons in the control-lever head activate “auto kick-down” two-speed tracking. 11 ft 11 in. 13 ft 1 in.
We are the second owners of the machine, we bought it in 2009 and installed the shear on it Brand New in 2012. The machine has only 4819 Actual hours on it, the Shear itself has 2019 hours on it since installation. We ordered a new Sierra 900CLS a year and a half ago and it was suppose to have been delivered in September 2022. Long story short, It didn’t get delivered till March 2023, and we needed another Trackhoe Shear to keep up with our volume and we bought a new second Trackhoe Shear in September 2022. This machine has been well maintained, we serviced the machine every 500 hours or 6 months, whichever comes first, small routine maintenance we did ourselves, larger maintenance was always done by either Rudd Equipment, or Company Wrench. Heat, A/C, and radio all work, engine runs great, doesn’t smoke or burn oil, no hydraulic leaks, cylinders are dry, hydraulic pumps are strong, undercarriage is in excellent shape. The shear has a brand new set of unused blades that were just installed, we also have some used blades and misc. Extra blade bolts that come with the machine. There are probably lots of other little repairs we have done also along the way, but these are two of the recent larger ones. This is a very nice and clean machine with straight sheet metal, has not been abused and has been owner operated only!! We have never let an employee operate this machine. Most used Shears are nasty and beat up, you will see in the pictures that it is very clean and has been well taken care of. Only thing I know the machine needs is upper and lower front windshields replaced at some point. Both of them are cracked, but not bad enough in my opinion to replace yet. If you have any questions, feel free to message me. You can view the machine Monday through Friday between the hours of 8-4 Eastern time at. Waddell’s Auto Recycling. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “318detroit” and is located in this country: US. This item can be shipped to United States.
2008 KOMATSU PC78US-6 EXCAVATOR. FEATURES: ENCLOSED CAB, A/C, HEAT. 2 SPEED, REDUCED TAILSWING, PRE EMISSIONS DIESEL ENGINE, PUSH BLADE, RADIO, BRAND NEW TRACKS! WEIGHS 16,000 LBS. CALL OR TEXT 8137135045. FULL LINE OF ATTACHMENTS AND TRAILERS! OVER 85 MACHINES AVAILABLE! This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “clsequipment” and is located in this country: US. This item can be shipped to United States.
2019 BOBCAT E35 MINI EXCAVTOR. FEATURES: OPEN CAB, AUXILLARY HYDRAULICS, HYDRAULIC THUMB, NO DEF DIESEL ENGINE, SWITCHABLE JOYSTICK CONTROLS, X CHANGE QUICK ATTACH BUCKET, DELUXE KEYPAD DISPLAY, AUTO IDLE. COMES WITH BUCKET IN PICTURE, OTHER ATTACHMENTS AVAILABLE! CALL OR TEXT 8137135045. FULL LINE OF ATTACHMENTS AND TRAILERS! OVER 100 MACHINES AVAILABLE! This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “clsequipment” and is located in this country: US. This item can be shipped to United States.
CASE CX55B Excavator, Piped For Thumb / Hammer Rubber Tracks, 2016, Work Ready. Ready for Job Site. Clean Machine, Every-thing works as it should, Ready for Job Site. We are located in Miami FL, feel free to come see machine anytime MON-FRI 9-5. Family Owned Since 1987. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “uspartslocators” and is located in this country: US. This item can be shipped to United States.
The machine can be inspected on my yard and directions and hours of operation can be printed from my website at wengersdotcom. I have more late model machines in stock. Check my other auctions. I have alot more pictures on my website along with a good video showing more of the machine. 2014 Caterpillar 303.5E excavator, 5012 Hours, quick attach, Aux plumbing, Open Rops, Blade, nice Tracks, clean, work ready. More pictures, directions and hours of operation can be found on my company website at wengersdotcom. Financing and trucking available. I have more backhoes in stock. See my other auctions. To see about me. Track Page Views With. Auctiva’s FREE Counter. The item “2014 Caterpillar 303.5E Excavator, 5012 Hours, Aux plumbed, Work Ready” is in sale since Thursday, June 13, 2019. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “0992″ and is located in Myerstown, Pennsylvania. This item can’t be shipped, the buyer must pick up the item.
2017 JCB 48Z-1 MINI EXCAVATOR. FEATURES: SWITCHABLE JOYSTICK CONTROLS, 2 SPEED, HIGH FLOW AUXILIARY HYDRAULICS, 24 TOOTH BUCKET, 400MM WIDE TRACKS. THIS MACHINE IS READY TO GO TO THE JOBSITE! CALL OR TEXT 2292331302. FULL LINE OF ATTACHMENTS AND TRAILERS! The item “2017 JCB 48Z-1 MINI EXCAVATOR 10,200 LBS LOW HOURS READY TO WORK” is in sale since Wednesday, April 7, 2021. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “clsequipment” and is located in Zephyrhills, Florida. This item can be shipped to United States.
Machine has 7207 hours. WE HAVE OVER 100 MACHINES IN STOCK! PLEASE CHECK OUT OUR OTHER LISTINGS FOR MORE GREAT MACHINES AVAILABLE! PLEASE CALL OR TEXT BILL! WE HAVE FINANCING AVAILABLE! WE ARE LOCATED AT 10 WEST STREET, NYACK, NY 10960. We are an Equipment Rental Company and Dealers for GEHL, KOBELCO, LS TRACTOR, BOXER DEALER. Boom/Stick Option (Hex) 1. Max Reach Along Ground. Max Vertical Wall Digging Depth. Boom 18\’7\” (5680mm) / Stick 9\’7\” (2900mm) -Reach. Boom/Stick Option (Hex) 2. Boom 18\’7\” (5680mm) / Stick 8\’2\” (2500mm) -Reach. Height To Top Of Cab. Width To Outside Of Tracks. Length Of Track On Ground. Number Of Shoes Per Side. Number Of Carrier Rollers Per Side. Number Of Track Rollers Per Side. Net Power – Iso 9249. Net Power – Sae J1349. Cat C6.4 ACERT. Net Power – Eec 80/1269. Cooling System Fluid Capacity. Hydraulic System Fluid Capacity. Swing Drive Fluid Capacity. Hydraulic System Relief Valve Pressure. Hydraulic Pump Flow Capacity. Operating Weight – Long Undercarriage. Operating Weight – Standard Undercarriage. Operating Weight – Long Undercarriage 2. Pilot System – Maximum Flow. Pilot System – Maximum Pressure. Maximum Pressure – Travel. Maximum Pressure – Swing. Maximum Pressure – Heavy Lift. Main Implement System – Maximum Flow (2x). Boom Cylinder – Bore. Boom Cylinder – Stroke. Maximum Pressure – Equipment. B1 Family Bucket Cylinder – Bore. B1 Family Bucket Cylinder – Stroke. Reach Stick Cylinder – Bore. Reach Stick Cylinder – Stroke. Final Drive – Each. Hydraulic System – Including Tank. Hydraulic Tank – Including Suction Pipe. ANSI/SAE J1166 APR 90. Number Of Track Rollers – Each Side – Long Undercarriage. Number Of Shoes – Each Side – Long Undercarriage. Number Of Carrier Rollers – Each Side – Long Undercarriage. The item “Excavator Cat 321C LCR In Excellent Condition & Ready to Work” is in sale since Tuesday, August 24, 2021. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “aaa.equipment” and is located in Nyack, New York. This item can’t be shipped, the buyer must pick up the item.