Skid Steer Attachment. Light Equipment & Tools. AGT PTO Drive Shaft 1 3/8″, Series 4 for Tractor 6 Spline Ends 41.33″-62. Agrotk 72 Soil Conditioner Hydraulic Skid Steer Attachment. Agrotk 7.5HP 4 Stroke 3 Inch Gasoline Water Pump Portable Gas-Powered Semi-Trash. Series 4 PTO Shaft Driveshaft for Tractor 1-3/8″ 6 Spline Round Ends 41.33″-62. AGT 30′ x 65′ Peak Ceiling PVC Storage Tent Shelter with 12 Drive Through Doors. Agrotk Skid Steer Hydraulic Auger Attachment Post Hole Digger 6” & 12? &14′. AGT 110LB Cast Steel Anvil Blacksmith Heat Treated Long Round Horn. AGT 132LB Cast Steel Anvil Blacksmith Heat Treated Long Round Horn. AGT 44LB Cast Steel Anvil Blacksmith Heat Treated Long Round Horn. AGT 22LB Cast Steel Anvil Blacksmith Heat Treated Long Round Horn. Suitable for our 12 series excavator. Thanks for your understanding. Please note that we have 3 brands. AGROTK, products of these 3 brands are totally exactly the same. YRC will not responsible for any unloading. The carrier may changed to your local logistics if you’re in. Please also note that heavy goods will be delivered by truck, it may change to your local carrier if you’re in remote area. Transit time varies and depends on the carrier, we cannot be held responsible for delays caused by carriers. This is happening because the carrier may. Carrier with no updates information. (Unless stated otherwise in the listing). And must include the. Original packaging and content. After we receive your package to process your return. We will give you a response in. All emails will be responded to within. Here is the information of our US warehouse for your reference. 6200 S Oak Park Ave, Unit B.
Note: All the machines in the picture are not included.
Hydraulic Thumb Clip For Mini Excavators Small Digger Attachment Kit. Strong load-bearing capacity: Although it is designed for 1-ton excavators, the load-bearing capacity of the hydraulic thumb clamp is usually far beyond this range, and can easily cope with a variety of operating requirements. The specific load-bearing capacity may vary depending on the brand and model, but it can generally meet the use requirements of most small excavators. Flexible rotation: This allows it to grab objects in any direction, especially suitable for work scenarios such as picking wood or sorting materials. Easy operation: The operation of the hydraulic thumb clamp is completely dependent on the hydraulic system of the excavator, and no additional power source is required. The driver only needs to operate the handle of the excavator to open and close and rotate the thumb clamp, which greatly reduces the difficulty of operation. Compact structure: The product has a reasonable design and compact structure. It can be easily folded up for storage when not in use or does not affect normal excavation operations when working. This saves space and improves work efficiency. 200mm diameter hydraulic auger attachment for mini excavator. Before purchasing this 200mm hydraulic auger attachment, please make sure to confirm the connection size first. The connection size is. 1000mm Plain Bucket Attachment For Mini Excavator. Before purchasing this 1000mm plain bucket attachment, please make sure to confirm the connection size first. 0.8-1.5Ton Mini Excavators Quick Hitch Attachment. This Mini Excavator Attachment Quick Hitch is designed for quick change of multiple attachments. It is made of high-quality steel material and is compatible with excavators. The hitch type is a quick hitch, making it easy to attach and detach attachments. Making suitable for use with other brands of machines. A quick hitch (QH) on an excavator is a latching device that enables attachments to be connected to the dipper arm of the plant and interchanged quickly. An excavator operator may change the bucket on his excavator up to 30 times a day in order to maximise the machine productivity. The quick hitch coupler attachment makes it possible for a mini excavator to perform multiple tasks with different attachments, increasing its versatility and productivity. Ripper Attachment For Mini Hydraulic Excavator. Made specially For mini-excavators, this ripper attachment can be used for most other heavy equipment and below. Size of pin is? 25160, making suitable for use with other brands of machines. Using special tips on the end of its arms, the ripper can cut through almost any object with minimal effort from the operator. Rippers allow you to cut down large trees and shrubs with relative ease and remove small stumps of any size. Theyre also great at ripping through things like old barbed wire and other materials that would be very difficult to remove any other way. Used for the crushing and splitting of hard soil, sub-hard stone, and weathered stone. This makes up for the low efficiency of the breaker and the working environment that the bucket cannot so.
USED Werk-Brau 12 Tooth Bucket.
Bucket Width: 11.8 in. Hinge Pin Diameter: 0.98 in. Span: 3.62 in. Center Wheelbase: 3.54 in. Product Dimensions: 18.3 x 11.8 x 13.4 in. (465 x 300 x 340 mm). Net Weight: 44.3 lb. 1x Mini Excavator Narrow Bucket. 2x Hinge Pins with Nuts. Exceptional Digging Performance: The AHM 12 (300 mm) narrow bucket is perfect for digging trenches in soil, sand, clay, and other light to medium materials. It’s ideal for pipeline excavation, trench filling, and river dredging. Ideal for Mini Excavators: This narrow bucket features a 3.62 in. (92 mm) span, a 0.98 in. (25 mm) arm pin housing distance, and a 3.54 in. (90 mm) center wheelbase. It is designed to fit AHM mini excavators and various others up to 2 tons. Effortless Installation: With 2 hinge pins and 2 hydraulic hoses included, this mini excavator narrow bucket ensures quick and hassle-free setup. Its user-friendly design minimizes downtime, allowing for easy attachment and a faster return to work. Built for Tough Jobs: Made from high-hardness manganese steel, this narrow trenching bucket boasts a sturdy structure, ensuring exceptional durability and wear resistance, even in demanding conditions. Wide Applications: Our narrow digging bucket is an excellent choice for construction and engineering tasks. Perfect for various digging environments, including construction sites, landscaping, small demolition projects, and more.
Excavator Bucket Pins 70mm x 475mm 40cr steel.
The AGT-H15R Mini Excavator is perfect for small to medium-sized projects, offering a compact 1-ton design and a maximum digging depth of 5.41 feet. Ideal for tight spaces like gardens, parks, and orchards, it combines maneuverability with enhanced safety features, including internal hydraulic hoses and rear-opening compartments for easy maintenance. Operation Weight: 1 Ton. Horse Power: 13.5. Max Angle: 35 Degree. Bucket Capacity: 0.88 cubic feet. Engine Oil Change: 1.1 quarts. Fuel Consumption: 0.5-1.2 quarts/hour. Traveling Speed: 0-1.24 mph. Pressure (Travel/Slewing): 23.5/18 psi. Motor Types: BM6K-315 (Travel), BM2-315 (Slewing). Tank Capacity: Fuel – 1.77 gallons, Hydraulic Oil – 4.76 gallons. Main Pump Flow Rate: 8-12 gallons/minute. Max Digging Height: 102.76 inches. Max Unloading Height: 72.83 inches. Max Digging Depth: 65 inches. Max Digging Radius: 112.2 inches. Overall Length: 84.25 inches. Overall Width: 39.37 inches. Hydraulic Thumb for 1 Ton Mini Excavator. Hydraulic Thumb for QH12, H12, DM12, QH13, H15. Incompatible with L12, DY14, DJ14. Requires SET OF 2 BSPP 3/8 Male to DIN 16 Male Adapter to Fits QH12, H12, QH13, H13, H15, QS12R. The Hydraulic Thumb broadens the machine’s operational reach, enabling it to effectively handle objects of varying shapes and sizes for a range of engineering tasks. The hydraulic thumb also enhances safety during operations by firmly gripping objects, reducing the chances of drops and slips.
Description: Easy to install. Stable characteristics and high reliability. The connection size is. Please noted: before purchasing this hydraulic tilting bucket attachment, please make sure to confirm the connection size first. Tilting Bucket Attachment 600mm for Mini Excavators with oil pipe + pin shaft. Please noted : before purchasing this hydraulic tilting bucket attachment, please make sure to confirm the connection size first. The hydraulic tilting design of the bucket allows for 45 degrees of movement in each direction. This unique feature significantly enhances the maneuverability of the attachment, providing greater control and flexibility during operations. Increased Productivity: Ideal for bulk excavation of loose material and precision trimming of excavated sites, the tilting bucket boosts productivity. Its ability to tilt at a 45-degree angle on both sides increases production efficiency by enabling precise and controlled movements. 1 × 600mm Tilting bucket (with oil pipe + pin shaft). Before purchasing, please make sure that the above product model number, assembly details and listed pictures are consistent with your needs. Minor differences in part design may result in different model numbers. Please compare the pictures we listed with your old parts carefully. We will get back to you as soon as possible. We strive to provide the best products and services. Yard, Garden & Outdoor Living. Pool Equipment & Parts. Ropes, Cords & Slings. Weed & Pest Control. Plant Baskets, Pots & Boxes. Protective Netting & Mesh. Folding & Step Ladders. Landscape & Walkway Lights. Planting & Breeding Equipment. Hardware Cloth & Mesh. Bearing & Bushing Parts. Quick Change Tool Post. Metal Cut Off Wheels. Carburetor for Briggs Stratton 300e 450e 500e 550e 575e 600e 591160 Carb Engine. 2Pcs/Lot 4.5 Super Thin Diamond Porcelain Saw Blade Ceramic Cutting Disc New. 3/8FNPT, 8 GPM, VRT3-250, Pressure Washer Unloader -Blue Spring, 3650 max PSI. 035 (0.9 mm) Mild Steel MIG Welding Wire 33 Lbs Roll New. 4000Lbs W/ Stabilizer Bar 60 Tractor Clamp On Pallet Forks Bucket Quick Attach.
Attachments Mini Excavator : Quick Hitch, Bucket, Ripper, Rake, Auger, Thumb Clip. Fully compatible with original functions. Good manufacturing technology ensures durability and optimum operation. Direct Fit, less expensive, easier to install. Made specially For mini-excavators, Size of pin is? 25160, making suitable for use with other brands of machines. These attachments can be easily attached and detached from the mini excavator using a quick hitch or coupler, allowing for quick changes between tasks and applications. These attachments can be used with most mini excavators below 3 tons. Mini excavators can be equipped with a variety of attachments to increase their versatility and efficiency. Some common attachments include. Used for digging, grading, and scooping materials. Used for drilling holes for fence posts, trees, and utility poles. Used for demolition, breaking concrete and asphalt. Used for picking up and manipulating objects, such as rocks and logs. Used for clearing debris and preparing soil for landscaping or agriculture. A bucket used for filtering materials and sorting out materials. Effective for shifting the rocks from the sand. A strong bucket for digging small corners. Normally used as trenching bucket; its cutting edges can be used for digging narrow trenches for utilities and drainage. These are ideal for clearing large areas of debris and loose material. 600mm 23.6in tilting bucket. The hydraulic tilting design allows 45 degrees of movement each way giving greater manoeuvrability of the attachment and increasing production. Rakes are used for clearing debris and preparing soil for landscaping or agriculture. A ripper is a tool that fits on the arm of an excavating machine (usually an excavator or backhoe). Its purpose is to help move large pieces of brush, trees, and debris. Using special tips on the end of its arms, the ripper can cut through almost any object with minimal effort from the operator. A quick hitch (QH) on an excavator is a latching device that enables attachments to be connected to the dipper arm of the plant and interchanged quickly. An excavator operator may change the bucket on his excavator up to 30 times a day in order to maximise the machine productivity. A hydraulic thumb clip attachment is an extra resource for you to help secure materials or to maintain a grip while working on the machine. Thumbs are also effective in scraps, recycling, construction, utility and landscaping applications. Adding an auger to a mini excavator is essential for making light work of digging post holes for retaining walls or fences, decks or footings for other structures. These are the attachments for Mini Excavators of many brands. Using equipment attachments helps you get more use out of a single piece of machinery, thus boosting your efficiency. Come to think of it. You’re also saving on ownership costs. With different attachments, you can use the same equipment for demolition, excavation, and leveraging instead of owning three other machines. Please note we do not cover the logistics costs and the labour involved.
Transit time varies and depends on the carrier, we can not be held responsible for delays caused by carriers. We will give you a response in 24 hours. All emails will be responded to within 12-24hours. 500mm Width Bucket Attachment for 0.8-1.5ton Mini Excavator Digger AGT Accessory. The No Teeth Flat bucket, featuring a 500mm wide surface, is engineered for loose materials like sand and gravel. Its smooth-edge design facilitates rapid shoveling and precise leveling operations, significantly improving loading efficiency. It’s suitable for Mini Excavator one ton or 1.5ton, such as AGT H12excavator. We have 100% real factory shot product pictures in our links, no Photoshop retouching! What you see is what you get! Package size: 5434.536cm. Submitting False “Item Not As Described” Evidence. Using photos of unrelated items or fabricated evidence to claim “item mismatch” will be treated as malicious fraud. Inventing Unreasonable Return Reasons. Fabricating false reasons e. Permanent Account Suspension: Repeated or severe violations will result in permanent account bans and full-platform trading restrictions. Buyers are reminded to submit return requests in good faith and comply with platform rules.