4435 St Hwy 274. Options and Standard Features. 24 Pin On Bucket. Steel Shoes With Rubber Boots. Max Dig Depth: 13′4. Operating Weight: 16,028LBS. Model: C2.4 Turbo. Net Power: 50.60 HP. Bore: 3.40 In. Displacement: 146.50 In3. Gross Power: 53.10 Hp. EPA Tier 4 Final. EU Stage IIIB Emission Standards. Rated Net Power – 2,200 Rpm – ISO 9249/EEC 80/1269: 50.60 HP. Stroke: 4.00 In. Operating Pressure – Travel: 4061.00 Psi. Load Sensing Hydraulics With Variable Displacement Piston Pump. Operating Pressure – Swing: 4061.00 Psi. Auxiliary Circuit – Primary (280 Bar/4,061 Psi): 33.80 Gal/Min. Auxiliary Circuit – Secondary (280 Bar/4,061 Psi): 8.70 Gal/Min. Operating Pressure – Equipment: 4061.00 Psi. Pump Flow At 2,400 Rpm: 40.90 Gal/Min. Operating Weight: 16028.00 LBS. Dig Depth: 13.40 Ft. Vertical Wall: 11.90 Ft. Maximum Reach – Ground Level: 20.20 Ft. Maximum Reach: 20.70 Ft. Maximum Dig Height: 23.80 Ft. Maximum Dump Clearance: 17.00 Ft. Boom In Reach: 5.50 Ft. Tail Swing – Standard Counterweight: 5.70 Ft. Maximum Blade Height: 1.30 Ft. Maximum Blade Depth: 1.10 Ft. Swing Bearing – Height: 2.50 Ft. O/A Undercarriage Length: 9.00 Ft. Track Belt/Shoe Width: 1.50 Ft. O/A Track Width: 7.20 Ft. Machine Swing Speed: 10.20 Rpm. Note: Automatic Swing Break, Spring Applied, Hydraulic Release. Width: 90.60 In. Height: 17.50 In. Dig Depth: 15.30 In. Lift Height: 13.80 In. Machine Overhang: 1.20 Ft. Stick Length: 5.50 Ft. Cooling System: 3.70 Gal. Engine Oil: 2.90 Gal. Hydraulic Tank: 13.50 Gal. Fuel Tank: 35.70 Gal. Hydraulic System: 20.60 Gal. THE STANDARD TAIL SWING DESIGN INCORPORATES A COUNTERWEIGHT THAT EXTENDS FURTHER BACK ON THE MACHINE FOR GREATER STABILITY. THE STANDARD TAIL SWING PAIRED WITH A FIXED BOOM ON THE 307E2 PROVIDES SUPERIOR REACH AND LIFT. THE OPERATOR ENVIRONMENT INCLUDES A HIGH-QUALITY SUSPENSION SEAT, EASY-TO-ADJUST ARMRESTS, AND 100% PILOT CONTROLS WHICH OFFER CONSISTENT AND LONG-LASTING CONTROLLABILITY. Only 55 miles South East of Dallas. Providence Equipment LLC reserves the right to. Providence Equipment LLC welcomes a buyers inspection. Title Information : Vehicles titles may be held by banks or lenders as collateral for loans. In many cases there is a delay in receiving the original instruments up to 21 days from the time we pay a vehicle off. While we usually have all titles in our possession at closing, there are occasions where we may be waiting for them to arrive. We assume no responsibility for damages incurred after the vehicle leaves our showroom. We are not affiliated with any carrier. Verify with the shipper for an Estimate Time of Arrival to be sure. This item is in the category “Business & Industrial\Heavy Equipment, Parts & Attachments\Heavy Equipment\Excavators”. The seller is “providence-equipment” and is located in this country: US. This item can be shipped to United States.